From mboxrd@z Thu Jan 1 00:00:00 1970 From: Al Viro Subject: [benet] possible endianness bug in be_cmd_txq_create() Date: Sun, 10 Dec 2017 16:41:20 +0000 Message-ID: <20171210164120.GS21978@ZenIV.linux.org.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Cc: Vasundhara Volam , Sathya Perla To: netdev@vger.kernel.org Return-path: Received: from zeniv.linux.org.uk ([195.92.253.2]:48602 "EHLO ZenIV.linux.org.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752214AbdLJQlV (ORCPT ); Sun, 10 Dec 2017 11:41:21 -0500 Content-Disposition: inline Sender: netdev-owner@vger.kernel.org List-ID: In be_cmd_txq_create() we have if (req->hdr.version > 0) req->if_id = cpu_to_le16(adapter->if_handle); req->num_pages = PAGES_4K_SPANNED(q_mem->va, q_mem->size); req->ulp_num = BE_ULP1_NUM; req->type = BE_ETH_TX_RING_TYPE_STANDARD; req->cq_id = cpu_to_le16(cq->id); req->queue_size = be_encoded_q_len(txq->len); be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem); ver = req->hdr.version; req points to struct be_cmd_req_eth_tx_create { struct be_cmd_req_hdr hdr; u8 num_pages; u8 ulp_num; u16 type; u16 if_id; u8 queue_size; u8 rsvd0; u32 rsvd1; u16 cq_id; u16 rsvd2; u32 rsvd3[13]; struct phys_addr pages[8]; } __packed; Everything appears to be consistent with little-endian data - direct assignments to u8 fields, cpu_to_le16 for cq_id and if_id, phys_addr array is also filled with little-endian data, so's ->hdr (several lines prior, by be_wrb_cmd_hdr_prepare()). The only exception is req->type = BE_ETH_TX_RING_TYPE_STANDARD; where we set a 16bit field with host-endian constant (2). benet is playing silly buggers with swap-in-place in some places, but it's always 32bit values getting swapped, so this can't be happening here (num_pages, ulp_num and type form a 32bit-aligned word, and on big-endian cpu_to_le32() done to it would've ended up with num_pages = 2, ulp_num = 0, type = 256 + PAGES_4K_SPANNED(q_mem->va, q_mem->size), which is unlikely to do anything good). So it really smells like this line should've been req->type = cpu_to_le16(BE_ETH_TX_RING_TYPE_STANDARD); I don't have the hardware, so the above is completely untested (caught by sparse when trying to do endianness annotations in drivers/net), but it does look like it might be worth a look from benet maintainers.