From mboxrd@z Thu Jan  1 00:00:00 1970
From: Andrew Lunn <andrew@lunn.ch>
Subject: Re: [PATCH net-next 5/5] net: phy: marvell10g: add support for half
 duplex 100M and 10M
Date: Tue, 2 Jan 2018 17:13:27 +0100
Message-ID: <20180102161327.GK20986@lunn.ch>
References: <20171229124412.GA10595@n2100.armlinux.org.uk>
 <E1eUu3f-0002Y8-5d@rmk-PC.armlinux.org.uk>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Cc: Florian Fainelli <f.fainelli@gmail.com>, netdev@vger.kernel.org
To: Russell King <rmk+kernel@armlinux.org.uk>
Return-path: <netdev-owner@vger.kernel.org>
Received: from vps0.lunn.ch ([185.16.172.187]:50671 "EHLO vps0.lunn.ch"
        rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP
        id S1750996AbeABQN2 (ORCPT <rfc822;netdev@vger.kernel.org>);
        Tue, 2 Jan 2018 11:13:28 -0500
Content-Disposition: inline
In-Reply-To: <E1eUu3f-0002Y8-5d@rmk-PC.armlinux.org.uk>
Sender: netdev-owner@vger.kernel.org
List-ID: <netdev.vger.kernel.org>

On Fri, Dec 29, 2017 at 12:46:43PM +0000, Russell King wrote:
> Add support for half-duplex 100M and 10M copper connections by parsing
> the advertisment results rather than trying to decode the negotiated
> speed from one of the PHYs "vendor" registers.  This allows us to
> decode the duplex as well, which means we can support half-duplex mode
> for the slower speeds.
> 
> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew