* [PATCH 01/10] net: mvneta: ensure PM paths take the rtnl lock
2018-01-02 17:22 [PATCH 00/10] Convert mvneta to phylink Russell King - ARM Linux
@ 2018-01-02 17:24 ` Russell King
2018-01-02 17:24 ` [PATCH 02/10] net: mvneta: prepare to convert to phylink Russell King
` (10 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Russell King @ 2018-01-02 17:24 UTC (permalink / raw)
To: Andrew Lunn, Florian Fainelli, Thomas Petazzoni; +Cc: netdev
The netdev core always ensures that the rtnl lock is held while calling
the ndo_open() and ndo_stop() methods. However, the suspend/resume paths
do not hold the rtnl lock. phylink will expect the rtnl lock to be held
when the MAC driver calls it, so we end up with kernel warnings. Take
the lock to ensure that these functions are called in a consistent
manner.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
drivers/net/ethernet/marvell/mvneta.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index a539263cd79c..e08bd20352cb 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -4426,8 +4426,10 @@ static int mvneta_suspend(struct device *device)
struct net_device *dev = dev_get_drvdata(device);
struct mvneta_port *pp = netdev_priv(dev);
+ rtnl_lock();
if (netif_running(dev))
mvneta_stop(dev);
+ rtnl_unlock();
netif_device_detach(dev);
clk_disable_unprepare(pp->clk_bus);
clk_disable_unprepare(pp->clk);
@@ -4464,10 +4466,12 @@ static int mvneta_resume(struct device *device)
mvneta_fixed_link_update(pp, dev->phydev);
netif_device_attach(dev);
+ rtnl_lock();
if (netif_running(dev)) {
mvneta_open(dev);
mvneta_set_rx_mode(dev);
}
+ rtnl_unlock();
return 0;
}
--
2.7.4
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH 02/10] net: mvneta: prepare to convert to phylink
2018-01-02 17:22 [PATCH 00/10] Convert mvneta to phylink Russell King - ARM Linux
2018-01-02 17:24 ` [PATCH 01/10] net: mvneta: ensure PM paths take the rtnl lock Russell King
@ 2018-01-02 17:24 ` Russell King
2018-01-02 17:24 ` [PATCH 03/10] net: mvneta: " Russell King
` (9 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Russell King @ 2018-01-02 17:24 UTC (permalink / raw)
To: Andrew Lunn, Florian Fainelli, Thomas Petazzoni; +Cc: netdev
Prepare to convert mvneta to phylink by splitting the adjust_link
function into its consituent parts.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
drivers/net/ethernet/marvell/mvneta.c | 101 ++++++++++++++++++++--------------
1 file changed, 60 insertions(+), 41 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index e08bd20352cb..3dfe4b3edef2 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -3251,37 +3251,73 @@ static int mvneta_set_mac_addr(struct net_device *dev, void *addr)
return 0;
}
-static void mvneta_adjust_link(struct net_device *ndev)
+static void mvneta_mac_config(struct net_device *ndev)
{
struct mvneta_port *pp = netdev_priv(ndev);
struct phy_device *phydev = ndev->phydev;
- int status_change = 0;
+ u32 val;
- if (phydev->link) {
- if ((pp->speed != phydev->speed) ||
- (pp->duplex != phydev->duplex)) {
- u32 val;
+ if ((pp->speed != phydev->speed) ||
+ (pp->duplex != phydev->duplex)) {
+ val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
+ val &= ~(MVNETA_GMAC_CONFIG_MII_SPEED |
+ MVNETA_GMAC_CONFIG_GMII_SPEED |
+ MVNETA_GMAC_CONFIG_FULL_DUPLEX);
- val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
- val &= ~(MVNETA_GMAC_CONFIG_MII_SPEED |
- MVNETA_GMAC_CONFIG_GMII_SPEED |
- MVNETA_GMAC_CONFIG_FULL_DUPLEX);
+ if (phydev->duplex)
+ val |= MVNETA_GMAC_CONFIG_FULL_DUPLEX;
- if (phydev->duplex)
- val |= MVNETA_GMAC_CONFIG_FULL_DUPLEX;
+ if (phydev->speed == SPEED_1000)
+ val |= MVNETA_GMAC_CONFIG_GMII_SPEED;
+ else if (phydev->speed == SPEED_100)
+ val |= MVNETA_GMAC_CONFIG_MII_SPEED;
- if (phydev->speed == SPEED_1000)
- val |= MVNETA_GMAC_CONFIG_GMII_SPEED;
- else if (phydev->speed == SPEED_100)
- val |= MVNETA_GMAC_CONFIG_MII_SPEED;
+ mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
- mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
+ pp->duplex = phydev->duplex;
+ pp->speed = phydev->speed;
+ }
+}
- pp->duplex = phydev->duplex;
- pp->speed = phydev->speed;
- }
+static void mvneta_mac_link_down(struct net_device *ndev, bool autoneg)
+{
+ struct mvneta_port *pp = netdev_priv(ndev);
+ u32 val;
+
+ if (!autoneg) {
+ val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
+ val &= ~MVNETA_GMAC_FORCE_LINK_PASS;
+ val |= MVNETA_GMAC_FORCE_LINK_DOWN;
+ mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
}
+ mvneta_port_down(pp);
+}
+
+static void mvneta_mac_link_up(struct net_device *ndev, bool autoneg)
+{
+ struct mvneta_port *pp = netdev_priv(ndev);
+ u32 val;
+
+ if (!autoneg) {
+ val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
+ val &= ~MVNETA_GMAC_FORCE_LINK_DOWN;
+ val |= MVNETA_GMAC_FORCE_LINK_PASS;
+ mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
+ }
+
+ mvneta_port_up(pp);
+}
+
+static void mvneta_adjust_link(struct net_device *ndev)
+{
+ struct mvneta_port *pp = netdev_priv(ndev);
+ struct phy_device *phydev = ndev->phydev;
+ int status_change = 0;
+
+ if (phydev->link)
+ mvneta_mac_config(ndev);
+
if (phydev->link != pp->link) {
if (!phydev->link) {
pp->duplex = -1;
@@ -3293,27 +3329,10 @@ static void mvneta_adjust_link(struct net_device *ndev)
}
if (status_change) {
- if (phydev->link) {
- if (!pp->use_inband_status) {
- u32 val = mvreg_read(pp,
- MVNETA_GMAC_AUTONEG_CONFIG);
- val &= ~MVNETA_GMAC_FORCE_LINK_DOWN;
- val |= MVNETA_GMAC_FORCE_LINK_PASS;
- mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG,
- val);
- }
- mvneta_port_up(pp);
- } else {
- if (!pp->use_inband_status) {
- u32 val = mvreg_read(pp,
- MVNETA_GMAC_AUTONEG_CONFIG);
- val &= ~MVNETA_GMAC_FORCE_LINK_PASS;
- val |= MVNETA_GMAC_FORCE_LINK_DOWN;
- mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG,
- val);
- }
- mvneta_port_down(pp);
- }
+ if (phydev->link)
+ mvneta_mac_link_down(ndev, pp->use_inband_status);
+ else
+ mvneta_mac_link_up(ndev, pp->use_inband_status);
phy_print_status(phydev);
}
}
--
2.7.4
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH 03/10] net: mvneta: convert to phylink
2018-01-02 17:22 [PATCH 00/10] Convert mvneta to phylink Russell King - ARM Linux
2018-01-02 17:24 ` [PATCH 01/10] net: mvneta: ensure PM paths take the rtnl lock Russell King
2018-01-02 17:24 ` [PATCH 02/10] net: mvneta: prepare to convert to phylink Russell King
@ 2018-01-02 17:24 ` Russell King
2018-01-02 17:24 ` [PATCH 04/10] net: mvneta: move port configuration Russell King
` (8 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Russell King @ 2018-01-02 17:24 UTC (permalink / raw)
To: Andrew Lunn, Florian Fainelli, Thomas Petazzoni; +Cc: netdev
Convert mvneta to use phylink, which models the MAC to PHY link in
a generic, reusable form.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
- remove unused sync status
---
drivers/net/ethernet/marvell/Kconfig | 2 +-
drivers/net/ethernet/marvell/mvneta.c | 417 ++++++++++++++--------------------
2 files changed, 176 insertions(+), 243 deletions(-)
diff --git a/drivers/net/ethernet/marvell/Kconfig b/drivers/net/ethernet/marvell/Kconfig
index da6fb825afea..ebe5c9148935 100644
--- a/drivers/net/ethernet/marvell/Kconfig
+++ b/drivers/net/ethernet/marvell/Kconfig
@@ -60,7 +60,7 @@ config MVNETA
depends on ARCH_MVEBU || COMPILE_TEST
depends on HAS_DMA
select MVMDIO
- select FIXED_PHY
+ select PHYLINK
---help---
This driver supports the network interface units in the
Marvell ARMADA XP, ARMADA 370, ARMADA 38x and
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 3dfe4b3edef2..fabe17bd39f9 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -28,7 +28,7 @@
#include <linux/of_mdio.h>
#include <linux/of_net.h>
#include <linux/phy.h>
-#include <linux/phy_fixed.h>
+#include <linux/phylink.h>
#include <linux/platform_device.h>
#include <linux/skbuff.h>
#include <net/hwbm.h>
@@ -204,6 +204,8 @@
#define MVNETA_GMAC_TX_FLOW_CTRL_ENABLE BIT(5)
#define MVNETA_GMAC_RX_FLOW_CTRL_ACTIVE BIT(6)
#define MVNETA_GMAC_TX_FLOW_CTRL_ACTIVE BIT(7)
+#define MVNETA_GMAC_AN_COMPLETE BIT(11)
+#define MVNETA_GMAC_SYNC_OK BIT(14)
#define MVNETA_GMAC_AUTONEG_CONFIG 0x2c0c
#define MVNETA_GMAC_FORCE_LINK_DOWN BIT(0)
#define MVNETA_GMAC_FORCE_LINK_PASS BIT(1)
@@ -407,14 +409,10 @@ struct mvneta_port {
u16 tx_ring_size;
u16 rx_ring_size;
- struct mii_bus *mii_bus;
phy_interface_t phy_interface;
- struct device_node *phy_node;
- unsigned int link;
- unsigned int duplex;
- unsigned int speed;
+ struct device_node *dn;
unsigned int tx_csum_limit;
- unsigned int use_inband_status:1;
+ struct phylink *phylink;
struct mvneta_bm *bm_priv;
struct mvneta_bm_pool *pool_long;
@@ -1214,10 +1212,6 @@ static void mvneta_port_disable(struct mvneta_port *pp)
val &= ~MVNETA_GMAC0_PORT_ENABLE;
mvreg_write(pp, MVNETA_GMAC_CTRL_0, val);
- pp->link = 0;
- pp->duplex = -1;
- pp->speed = 0;
-
udelay(200);
}
@@ -1277,44 +1271,6 @@ static void mvneta_set_other_mcast_table(struct mvneta_port *pp, int queue)
mvreg_write(pp, MVNETA_DA_FILT_OTH_MCAST + offset, val);
}
-static void mvneta_set_autoneg(struct mvneta_port *pp, int enable)
-{
- u32 val;
-
- if (enable) {
- val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
- val &= ~(MVNETA_GMAC_FORCE_LINK_PASS |
- MVNETA_GMAC_FORCE_LINK_DOWN |
- MVNETA_GMAC_AN_FLOW_CTRL_EN);
- val |= MVNETA_GMAC_INBAND_AN_ENABLE |
- MVNETA_GMAC_AN_SPEED_EN |
- MVNETA_GMAC_AN_DUPLEX_EN;
- mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
-
- val = mvreg_read(pp, MVNETA_GMAC_CLOCK_DIVIDER);
- val |= MVNETA_GMAC_1MS_CLOCK_ENABLE;
- mvreg_write(pp, MVNETA_GMAC_CLOCK_DIVIDER, val);
-
- val = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
- val |= MVNETA_GMAC2_INBAND_AN_ENABLE;
- mvreg_write(pp, MVNETA_GMAC_CTRL_2, val);
- } else {
- val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
- val &= ~(MVNETA_GMAC_INBAND_AN_ENABLE |
- MVNETA_GMAC_AN_SPEED_EN |
- MVNETA_GMAC_AN_DUPLEX_EN);
- mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
-
- val = mvreg_read(pp, MVNETA_GMAC_CLOCK_DIVIDER);
- val &= ~MVNETA_GMAC_1MS_CLOCK_ENABLE;
- mvreg_write(pp, MVNETA_GMAC_CLOCK_DIVIDER, val);
-
- val = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
- val &= ~MVNETA_GMAC2_INBAND_AN_ENABLE;
- mvreg_write(pp, MVNETA_GMAC_CTRL_2, val);
- }
-}
-
static void mvneta_percpu_unmask_interrupt(void *arg)
{
struct mvneta_port *pp = arg;
@@ -1467,7 +1423,6 @@ static void mvneta_defaults_set(struct mvneta_port *pp)
val &= ~MVNETA_PHY_POLLING_ENABLE;
mvreg_write(pp, MVNETA_UNIT_CONTROL, val);
- mvneta_set_autoneg(pp, pp->use_inband_status);
mvneta_set_ucast_table(pp, -1);
mvneta_set_special_mcast_table(pp, -1);
mvneta_set_other_mcast_table(pp, -1);
@@ -2692,26 +2647,11 @@ static irqreturn_t mvneta_percpu_isr(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static int mvneta_fixed_link_update(struct mvneta_port *pp,
- struct phy_device *phy)
+static void mvneta_link_change(struct mvneta_port *pp)
{
- struct fixed_phy_status status;
- struct fixed_phy_status changed = {};
u32 gmac_stat = mvreg_read(pp, MVNETA_GMAC_STATUS);
- status.link = !!(gmac_stat & MVNETA_GMAC_LINK_UP);
- if (gmac_stat & MVNETA_GMAC_SPEED_1000)
- status.speed = SPEED_1000;
- else if (gmac_stat & MVNETA_GMAC_SPEED_100)
- status.speed = SPEED_100;
- else
- status.speed = SPEED_10;
- status.duplex = !!(gmac_stat & MVNETA_GMAC_FULL_DUPLEX);
- changed.link = 1;
- changed.speed = 1;
- changed.duplex = 1;
- fixed_phy_update_state(phy, &status, &changed);
- return 0;
+ phylink_mac_change(pp->phylink, !!(gmac_stat & MVNETA_GMAC_LINK_UP));
}
/* NAPI handler
@@ -2727,7 +2667,6 @@ static int mvneta_poll(struct napi_struct *napi, int budget)
u32 cause_rx_tx;
int rx_queue;
struct mvneta_port *pp = netdev_priv(napi->dev);
- struct net_device *ndev = pp->dev;
struct mvneta_pcpu_port *port = this_cpu_ptr(pp->ports);
if (!netif_running(pp->dev)) {
@@ -2741,12 +2680,11 @@ static int mvneta_poll(struct napi_struct *napi, int budget)
u32 cause_misc = mvreg_read(pp, MVNETA_INTR_MISC_CAUSE);
mvreg_write(pp, MVNETA_INTR_MISC_CAUSE, 0);
- if (pp->use_inband_status && (cause_misc &
- (MVNETA_CAUSE_PHY_STATUS_CHANGE |
- MVNETA_CAUSE_LINK_CHANGE |
- MVNETA_CAUSE_PSC_SYNC_CHANGE))) {
- mvneta_fixed_link_update(pp, ndev->phydev);
- }
+
+ if (cause_misc & (MVNETA_CAUSE_PHY_STATUS_CHANGE |
+ MVNETA_CAUSE_LINK_CHANGE |
+ MVNETA_CAUSE_PSC_SYNC_CHANGE))
+ mvneta_link_change(pp);
}
/* Release Tx descriptors */
@@ -3060,7 +2998,6 @@ static int mvneta_setup_txqs(struct mvneta_port *pp)
static void mvneta_start_dev(struct mvneta_port *pp)
{
int cpu;
- struct net_device *ndev = pp->dev;
mvneta_max_rx_size_set(pp, pp->pkt_size);
mvneta_txq_max_tx_size_set(pp, pp->pkt_size);
@@ -3088,16 +3025,15 @@ static void mvneta_start_dev(struct mvneta_port *pp)
MVNETA_CAUSE_LINK_CHANGE |
MVNETA_CAUSE_PSC_SYNC_CHANGE);
- phy_start(ndev->phydev);
+ phylink_start(pp->phylink);
netif_tx_start_all_queues(pp->dev);
}
static void mvneta_stop_dev(struct mvneta_port *pp)
{
unsigned int cpu;
- struct net_device *ndev = pp->dev;
- phy_stop(ndev->phydev);
+ phylink_stop(pp->phylink);
if (!pp->neta_armada3700) {
for_each_online_cpu(cpu) {
@@ -3251,55 +3187,141 @@ static int mvneta_set_mac_addr(struct net_device *dev, void *addr)
return 0;
}
-static void mvneta_mac_config(struct net_device *ndev)
+static void mvneta_validate(struct net_device *ndev, unsigned long *supported,
+ struct phylink_link_state *state)
+{
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
+
+ /* We only support QSGMII, SGMII and RGMII modes */
+ if (state->interface != PHY_INTERFACE_MODE_NA &&
+ state->interface != PHY_INTERFACE_MODE_QSGMII &&
+ state->interface != PHY_INTERFACE_MODE_SGMII &&
+ !phy_interface_mode_is_rgmii(state->interface)) {
+ bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
+ return;
+ }
+
+ /* Allow all the expected bits */
+ phylink_set(mask, Autoneg);
+ phylink_set_port_modes(mask);
+
+ /* Half-duplex at speeds higher than 100Mbit is unsupported */
+ phylink_set(mask, 1000baseT_Full);
+ phylink_set(mask, 1000baseX_Full);
+ phylink_set(mask, 10baseT_Half);
+ phylink_set(mask, 10baseT_Full);
+ phylink_set(mask, 100baseT_Half);
+ phylink_set(mask, 100baseT_Full);
+
+ bitmap_and(supported, supported, mask,
+ __ETHTOOL_LINK_MODE_MASK_NBITS);
+ bitmap_and(state->advertising, state->advertising, mask,
+ __ETHTOOL_LINK_MODE_MASK_NBITS);
+}
+
+static int mvneta_mac_link_state(struct net_device *ndev,
+ struct phylink_link_state *state)
{
struct mvneta_port *pp = netdev_priv(ndev);
- struct phy_device *phydev = ndev->phydev;
- u32 val;
+ u32 gmac_stat;
- if ((pp->speed != phydev->speed) ||
- (pp->duplex != phydev->duplex)) {
- val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
- val &= ~(MVNETA_GMAC_CONFIG_MII_SPEED |
- MVNETA_GMAC_CONFIG_GMII_SPEED |
- MVNETA_GMAC_CONFIG_FULL_DUPLEX);
+ gmac_stat = mvreg_read(pp, MVNETA_GMAC_STATUS);
- if (phydev->duplex)
- val |= MVNETA_GMAC_CONFIG_FULL_DUPLEX;
+ if (gmac_stat & MVNETA_GMAC_SPEED_1000)
+ state->speed = SPEED_1000;
+ else if (gmac_stat & MVNETA_GMAC_SPEED_100)
+ state->speed = SPEED_100;
+ else
+ state->speed = SPEED_10;
- if (phydev->speed == SPEED_1000)
- val |= MVNETA_GMAC_CONFIG_GMII_SPEED;
- else if (phydev->speed == SPEED_100)
- val |= MVNETA_GMAC_CONFIG_MII_SPEED;
+ state->an_complete = !!(gmac_stat & MVNETA_GMAC_AN_COMPLETE);
+ state->link = !!(gmac_stat & MVNETA_GMAC_LINK_UP);
+ state->duplex = !!(gmac_stat & MVNETA_GMAC_FULL_DUPLEX);
- mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
+ state->pause = 0;
+
+ return 1;
+}
+
+static void mvneta_mac_config(struct net_device *ndev, unsigned int mode,
+ const struct phylink_link_state *state)
+{
+ struct mvneta_port *pp = netdev_priv(ndev);
+ u32 new_ctrl2, gmac_ctrl2 = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
+ u32 new_clk, gmac_clk = mvreg_read(pp, MVNETA_GMAC_CLOCK_DIVIDER);
+ u32 new_an, gmac_an = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
+
+ new_ctrl2 = gmac_ctrl2 & ~MVNETA_GMAC2_INBAND_AN_ENABLE;
+ new_clk = gmac_clk & ~MVNETA_GMAC_1MS_CLOCK_ENABLE;
+ new_an = gmac_an & ~(MVNETA_GMAC_INBAND_AN_ENABLE |
+ MVNETA_GMAC_INBAND_RESTART_AN |
+ MVNETA_GMAC_CONFIG_MII_SPEED |
+ MVNETA_GMAC_CONFIG_GMII_SPEED |
+ MVNETA_GMAC_AN_SPEED_EN |
+ MVNETA_GMAC_AN_FLOW_CTRL_EN |
+ MVNETA_GMAC_CONFIG_FULL_DUPLEX |
+ MVNETA_GMAC_AN_DUPLEX_EN);
+
+ if (!phylink_autoneg_inband(mode)) {
+ /* Phy or fixed speed */
+ if (state->duplex)
+ new_an |= MVNETA_GMAC_CONFIG_FULL_DUPLEX;
+
+ if (state->speed == SPEED_1000)
+ new_an |= MVNETA_GMAC_CONFIG_GMII_SPEED;
+ else if (state->speed == SPEED_100)
+ new_an |= MVNETA_GMAC_CONFIG_MII_SPEED;
+ } else {
+ /* SGMII mode receives the state from the PHY */
+ new_ctrl2 |= MVNETA_GMAC2_INBAND_AN_ENABLE;
+ new_clk |= MVNETA_GMAC_1MS_CLOCK_ENABLE;
+ new_an = (new_an & ~(MVNETA_GMAC_FORCE_LINK_DOWN |
+ MVNETA_GMAC_FORCE_LINK_PASS)) |
+ MVNETA_GMAC_INBAND_AN_ENABLE |
+ MVNETA_GMAC_AN_SPEED_EN |
+ MVNETA_GMAC_AN_DUPLEX_EN;
+ }
- pp->duplex = phydev->duplex;
- pp->speed = phydev->speed;
+ /* Armada 370 documentation says we can only change the port mode
+ * and in-band enable when the link is down, so force it down
+ * while making these changes. We also do this for GMAC_CTRL2 */
+ if ((new_ctrl2 ^ gmac_ctrl2) & MVNETA_GMAC2_INBAND_AN_ENABLE ||
+ (new_an ^ gmac_an) & MVNETA_GMAC_INBAND_AN_ENABLE) {
+ mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG,
+ (gmac_an & ~MVNETA_GMAC_FORCE_LINK_PASS) |
+ MVNETA_GMAC_FORCE_LINK_DOWN);
}
+
+ if (new_ctrl2 != gmac_ctrl2)
+ mvreg_write(pp, MVNETA_GMAC_CTRL_2, new_ctrl2);
+ if (new_clk != gmac_clk)
+ mvreg_write(pp, MVNETA_GMAC_CLOCK_DIVIDER, new_clk);
+ if (new_an != gmac_an)
+ mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, new_an);
}
-static void mvneta_mac_link_down(struct net_device *ndev, bool autoneg)
+static void mvneta_mac_link_down(struct net_device *ndev, unsigned int mode)
{
struct mvneta_port *pp = netdev_priv(ndev);
u32 val;
- if (!autoneg) {
+ mvneta_port_down(pp);
+
+ if (!phylink_autoneg_inband(mode)) {
val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
val &= ~MVNETA_GMAC_FORCE_LINK_PASS;
val |= MVNETA_GMAC_FORCE_LINK_DOWN;
mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
}
-
- mvneta_port_down(pp);
}
-static void mvneta_mac_link_up(struct net_device *ndev, bool autoneg)
+static void mvneta_mac_link_up(struct net_device *ndev, unsigned int mode,
+ struct phy_device *phy)
{
struct mvneta_port *pp = netdev_priv(ndev);
u32 val;
- if (!autoneg) {
+ if (!phylink_autoneg_inband(mode)) {
val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
val &= ~MVNETA_GMAC_FORCE_LINK_DOWN;
val |= MVNETA_GMAC_FORCE_LINK_PASS;
@@ -3309,64 +3331,31 @@ static void mvneta_mac_link_up(struct net_device *ndev, bool autoneg)
mvneta_port_up(pp);
}
-static void mvneta_adjust_link(struct net_device *ndev)
-{
- struct mvneta_port *pp = netdev_priv(ndev);
- struct phy_device *phydev = ndev->phydev;
- int status_change = 0;
-
- if (phydev->link)
- mvneta_mac_config(ndev);
-
- if (phydev->link != pp->link) {
- if (!phydev->link) {
- pp->duplex = -1;
- pp->speed = 0;
- }
-
- pp->link = phydev->link;
- status_change = 1;
- }
-
- if (status_change) {
- if (phydev->link)
- mvneta_mac_link_down(ndev, pp->use_inband_status);
- else
- mvneta_mac_link_up(ndev, pp->use_inband_status);
- phy_print_status(phydev);
- }
-}
+static const struct phylink_mac_ops mvneta_phylink_ops = {
+ .validate = mvneta_validate,
+ .mac_link_state = mvneta_mac_link_state,
+ .mac_config = mvneta_mac_config,
+ .mac_link_down = mvneta_mac_link_down,
+ .mac_link_up = mvneta_mac_link_up,
+};
static int mvneta_mdio_probe(struct mvneta_port *pp)
{
- struct phy_device *phy_dev;
struct ethtool_wolinfo wol = { .cmd = ETHTOOL_GWOL };
+ int err = phylink_of_phy_connect(pp->phylink, pp->dn, 0);
- phy_dev = of_phy_connect(pp->dev, pp->phy_node, mvneta_adjust_link, 0,
- pp->phy_interface);
- if (!phy_dev) {
- netdev_err(pp->dev, "could not find the PHY\n");
- return -ENODEV;
- }
+ if (err)
+ netdev_err(pp->dev, "could not attach PHY: %d\n", err);
- phy_ethtool_get_wol(phy_dev, &wol);
+ phylink_ethtool_get_wol(pp->phylink, &wol);
device_set_wakeup_capable(&pp->dev->dev, !!wol.supported);
- phy_dev->supported &= PHY_GBIT_FEATURES;
- phy_dev->advertising = phy_dev->supported;
-
- pp->link = 0;
- pp->duplex = 0;
- pp->speed = 0;
-
- return 0;
+ return err;
}
static void mvneta_mdio_remove(struct mvneta_port *pp)
{
- struct net_device *ndev = pp->dev;
-
- phy_disconnect(ndev->phydev);
+ phylink_disconnect_phy(pp->phylink);
}
/* Electing a CPU must be done in an atomic way: it should be done
@@ -3645,10 +3634,9 @@ static int mvneta_stop(struct net_device *dev)
static int mvneta_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
- if (!dev->phydev)
- return -ENOTSUPP;
+ struct mvneta_port *pp = netdev_priv(dev);
- return phy_mii_ioctl(dev->phydev, ifr, cmd);
+ return phylink_mii_ioctl(pp->phylink, ifr, cmd);
}
/* Ethtool methods */
@@ -3659,44 +3647,25 @@ mvneta_ethtool_set_link_ksettings(struct net_device *ndev,
const struct ethtool_link_ksettings *cmd)
{
struct mvneta_port *pp = netdev_priv(ndev);
- struct phy_device *phydev = ndev->phydev;
-
- if (!phydev)
- return -ENODEV;
-
- if ((cmd->base.autoneg == AUTONEG_ENABLE) != pp->use_inband_status) {
- u32 val;
-
- mvneta_set_autoneg(pp, cmd->base.autoneg == AUTONEG_ENABLE);
- if (cmd->base.autoneg == AUTONEG_DISABLE) {
- val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
- val &= ~(MVNETA_GMAC_CONFIG_MII_SPEED |
- MVNETA_GMAC_CONFIG_GMII_SPEED |
- MVNETA_GMAC_CONFIG_FULL_DUPLEX);
-
- if (phydev->duplex)
- val |= MVNETA_GMAC_CONFIG_FULL_DUPLEX;
-
- if (phydev->speed == SPEED_1000)
- val |= MVNETA_GMAC_CONFIG_GMII_SPEED;
- else if (phydev->speed == SPEED_100)
- val |= MVNETA_GMAC_CONFIG_MII_SPEED;
+ return phylink_ethtool_ksettings_set(pp->phylink, cmd);
+}
- mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
- }
+/* Get link ksettings for ethtools */
+static int
+mvneta_ethtool_get_link_ksettings(struct net_device *ndev,
+ struct ethtool_link_ksettings *cmd)
+{
+ struct mvneta_port *pp = netdev_priv(ndev);
- pp->use_inband_status = (cmd->base.autoneg == AUTONEG_ENABLE);
- netdev_info(pp->dev, "autoneg status set to %i\n",
- pp->use_inband_status);
+ return phylink_ethtool_ksettings_get(pp->phylink, cmd);
+}
- if (netif_running(ndev)) {
- mvneta_port_down(pp);
- mvneta_port_up(pp);
- }
- }
+static int mvneta_ethtool_nway_reset(struct net_device *dev)
+{
+ struct mvneta_port *pp = netdev_priv(dev);
- return phy_ethtool_ksettings_set(ndev->phydev, cmd);
+ return phylink_ethtool_nway_reset(pp->phylink);
}
/* Set interrupt coalescing for ethtools */
@@ -3958,22 +3927,18 @@ static int mvneta_ethtool_get_rxfh(struct net_device *dev, u32 *indir, u8 *key,
static void mvneta_ethtool_get_wol(struct net_device *dev,
struct ethtool_wolinfo *wol)
{
- wol->supported = 0;
- wol->wolopts = 0;
+ struct mvneta_port *pp = netdev_priv(dev);
- if (dev->phydev)
- phy_ethtool_get_wol(dev->phydev, wol);
+ phylink_ethtool_get_wol(pp->phylink, wol);
}
static int mvneta_ethtool_set_wol(struct net_device *dev,
struct ethtool_wolinfo *wol)
{
+ struct mvneta_port *pp = netdev_priv(dev);
int ret;
- if (!dev->phydev)
- return -EOPNOTSUPP;
-
- ret = phy_ethtool_set_wol(dev->phydev, wol);
+ ret = phylink_ethtool_set_wol(pp->phylink, wol);
if (!ret)
device_set_wakeup_enable(&dev->dev, !!wol->wolopts);
@@ -3993,7 +3958,7 @@ static const struct net_device_ops mvneta_netdev_ops = {
};
static const struct ethtool_ops mvneta_eth_tool_ops = {
- .nway_reset = phy_ethtool_nway_reset,
+ .nway_reset = mvneta_ethtool_nway_reset,
.get_link = ethtool_op_get_link,
.set_coalesce = mvneta_ethtool_set_coalesce,
.get_coalesce = mvneta_ethtool_get_coalesce,
@@ -4007,7 +3972,7 @@ static const struct ethtool_ops mvneta_eth_tool_ops = {
.get_rxnfc = mvneta_ethtool_get_rxnfc,
.get_rxfh = mvneta_ethtool_get_rxfh,
.set_rxfh = mvneta_ethtool_set_rxfh,
- .get_link_ksettings = phy_ethtool_get_link_ksettings,
+ .get_link_ksettings = mvneta_ethtool_get_link_ksettings,
.set_link_ksettings = mvneta_ethtool_set_link_ksettings,
.get_wol = mvneta_ethtool_get_wol,
.set_wol = mvneta_ethtool_set_wol,
@@ -4155,14 +4120,13 @@ static int mvneta_probe(struct platform_device *pdev)
{
struct resource *res;
struct device_node *dn = pdev->dev.of_node;
- struct device_node *phy_node;
struct device_node *bm_node;
struct mvneta_port *pp;
struct net_device *dev;
+ struct phylink *phylink;
const char *dt_mac_addr;
char hw_mac_addr[ETH_ALEN];
const char *mac_from;
- const char *managed;
int tx_csum_limit;
int phy_mode;
int err;
@@ -4178,31 +4142,18 @@ static int mvneta_probe(struct platform_device *pdev)
goto err_free_netdev;
}
- phy_node = of_parse_phandle(dn, "phy", 0);
- if (!phy_node) {
- if (!of_phy_is_fixed_link(dn)) {
- dev_err(&pdev->dev, "no PHY specified\n");
- err = -ENODEV;
- goto err_free_irq;
- }
-
- err = of_phy_register_fixed_link(dn);
- if (err < 0) {
- dev_err(&pdev->dev, "cannot register fixed PHY\n");
- goto err_free_irq;
- }
-
- /* In the case of a fixed PHY, the DT node associated
- * to the PHY is the Ethernet MAC DT node.
- */
- phy_node = of_node_get(dn);
- }
-
phy_mode = of_get_phy_mode(dn);
if (phy_mode < 0) {
dev_err(&pdev->dev, "incorrect phy-mode\n");
err = -EINVAL;
- goto err_put_phy_node;
+ goto err_free_irq;
+ }
+
+ phylink = phylink_create(dev, pdev->dev.fwnode, phy_mode,
+ &mvneta_phylink_ops);
+ if (IS_ERR(phylink)) {
+ err = PTR_ERR(phylink);
+ goto err_free_irq;
}
dev->tx_queue_len = MVNETA_MAX_TXD;
@@ -4213,12 +4164,9 @@ static int mvneta_probe(struct platform_device *pdev)
pp = netdev_priv(dev);
spin_lock_init(&pp->lock);
- pp->phy_node = phy_node;
+ pp->phylink = phylink;
pp->phy_interface = phy_mode;
-
- err = of_property_read_string(dn, "managed", &managed);
- pp->use_inband_status = (err == 0 &&
- strcmp(managed, "in-band-status") == 0);
+ pp->dn = dn;
pp->rxq_def = rxq_def;
@@ -4240,7 +4188,7 @@ static int mvneta_probe(struct platform_device *pdev)
pp->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(pp->clk)) {
err = PTR_ERR(pp->clk);
- goto err_put_phy_node;
+ goto err_free_phylink;
}
clk_prepare_enable(pp->clk);
@@ -4377,14 +4325,6 @@ static int mvneta_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, pp->dev);
- if (pp->use_inband_status) {
- struct phy_device *phy = of_phy_find_device(dn);
-
- mvneta_fixed_link_update(pp, phy);
-
- put_device(&phy->mdio.dev);
- }
-
return 0;
err_netdev:
@@ -4401,10 +4341,9 @@ static int mvneta_probe(struct platform_device *pdev)
err_clk:
clk_disable_unprepare(pp->clk_bus);
clk_disable_unprepare(pp->clk);
-err_put_phy_node:
- of_node_put(phy_node);
- if (of_phy_is_fixed_link(dn))
- of_phy_deregister_fixed_link(dn);
+err_free_phylink:
+ if (pp->phylink)
+ phylink_destroy(pp->phylink);
err_free_irq:
irq_dispose_mapping(dev->irq);
err_free_netdev:
@@ -4416,7 +4355,6 @@ static int mvneta_probe(struct platform_device *pdev)
static int mvneta_remove(struct platform_device *pdev)
{
struct net_device *dev = platform_get_drvdata(pdev);
- struct device_node *dn = pdev->dev.of_node;
struct mvneta_port *pp = netdev_priv(dev);
unregister_netdev(dev);
@@ -4424,10 +4362,8 @@ static int mvneta_remove(struct platform_device *pdev)
clk_disable_unprepare(pp->clk);
free_percpu(pp->ports);
free_percpu(pp->stats);
- if (of_phy_is_fixed_link(dn))
- of_phy_deregister_fixed_link(dn);
irq_dispose_mapping(dev->irq);
- of_node_put(pp->phy_node);
+ phylink_destroy(pp->phylink);
free_netdev(dev);
if (pp->bm_priv) {
@@ -4481,9 +4417,6 @@ static int mvneta_resume(struct device *device)
return err;
}
- if (pp->use_inband_status)
- mvneta_fixed_link_update(pp, dev->phydev);
-
netif_device_attach(dev);
rtnl_lock();
if (netif_running(dev)) {
--
2.7.4
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH 04/10] net: mvneta: move port configuration
2018-01-02 17:22 [PATCH 00/10] Convert mvneta to phylink Russell King - ARM Linux
` (2 preceding siblings ...)
2018-01-02 17:24 ` [PATCH 03/10] net: mvneta: " Russell King
@ 2018-01-02 17:24 ` Russell King
2018-01-02 17:24 ` [PATCH 05/10] net: mvneta: add 1000BaseX support Russell King
` (7 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Russell King @ 2018-01-02 17:24 UTC (permalink / raw)
To: Andrew Lunn, Florian Fainelli, Thomas Petazzoni; +Cc: netdev
Move the port configuration and release of reset to mvneta_mac_config()
along side the rest of the port mode configuration.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
drivers/net/ethernet/marvell/mvneta.c | 51 ++++++++++++++---------------------
1 file changed, 20 insertions(+), 31 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index fabe17bd39f9..ef54a8fc9515 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -3251,7 +3251,8 @@ static void mvneta_mac_config(struct net_device *ndev, unsigned int mode,
u32 new_clk, gmac_clk = mvreg_read(pp, MVNETA_GMAC_CLOCK_DIVIDER);
u32 new_an, gmac_an = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
- new_ctrl2 = gmac_ctrl2 & ~MVNETA_GMAC2_INBAND_AN_ENABLE;
+ new_ctrl2 = gmac_ctrl2 & ~(MVNETA_GMAC2_INBAND_AN_ENABLE |
+ MVNETA_GMAC2_PORT_RESET);
new_clk = gmac_clk & ~MVNETA_GMAC_1MS_CLOCK_ENABLE;
new_an = gmac_an & ~(MVNETA_GMAC_INBAND_AN_ENABLE |
MVNETA_GMAC_INBAND_RESTART_AN |
@@ -3262,6 +3263,15 @@ static void mvneta_mac_config(struct net_device *ndev, unsigned int mode,
MVNETA_GMAC_CONFIG_FULL_DUPLEX |
MVNETA_GMAC_AN_DUPLEX_EN);
+ /* Even though it might look weird, when we're configured in
+ * SGMII or QSGMII mode, the RGMII bit needs to be set.
+ */
+ new_ctrl2 |= MVNETA_GMAC2_PORT_RGMII;
+
+ if (state->interface == PHY_INTERFACE_MODE_QSGMII ||
+ state->interface == PHY_INTERFACE_MODE_SGMII)
+ new_ctrl2 |= MVNETA_GMAC2_PCS_ENABLE;
+
if (!phylink_autoneg_inband(mode)) {
/* Phy or fixed speed */
if (state->duplex)
@@ -3298,6 +3308,12 @@ static void mvneta_mac_config(struct net_device *ndev, unsigned int mode,
mvreg_write(pp, MVNETA_GMAC_CLOCK_DIVIDER, new_clk);
if (new_an != gmac_an)
mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, new_an);
+
+ if (gmac_ctrl2 & MVNETA_GMAC2_PORT_RESET) {
+ while ((mvreg_read(pp, MVNETA_GMAC_CTRL_2) &
+ MVNETA_GMAC2_PORT_RESET) != 0)
+ continue;
+ }
}
static void mvneta_mac_link_down(struct net_device *ndev, unsigned int mode)
@@ -4075,42 +4091,15 @@ static void mvneta_conf_mbus_windows(struct mvneta_port *pp,
/* Power up the port */
static int mvneta_port_power_up(struct mvneta_port *pp, int phy_mode)
{
- u32 ctrl;
-
/* MAC Cause register should be cleared */
mvreg_write(pp, MVNETA_UNIT_INTR_CAUSE, 0);
- ctrl = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
-
- /* Even though it might look weird, when we're configured in
- * SGMII or QSGMII mode, the RGMII bit needs to be set.
- */
- switch(phy_mode) {
- case PHY_INTERFACE_MODE_QSGMII:
+ if (phy_mode == PHY_INTERFACE_MODE_QSGMII)
mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_QSGMII_SERDES_PROTO);
- ctrl |= MVNETA_GMAC2_PCS_ENABLE | MVNETA_GMAC2_PORT_RGMII;
- break;
- case PHY_INTERFACE_MODE_SGMII:
+ else if (phy_mode == PHY_INTERFACE_MODE_SGMII)
mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_SGMII_SERDES_PROTO);
- ctrl |= MVNETA_GMAC2_PCS_ENABLE | MVNETA_GMAC2_PORT_RGMII;
- break;
- case PHY_INTERFACE_MODE_RGMII:
- case PHY_INTERFACE_MODE_RGMII_ID:
- case PHY_INTERFACE_MODE_RGMII_RXID:
- case PHY_INTERFACE_MODE_RGMII_TXID:
- ctrl |= MVNETA_GMAC2_PORT_RGMII;
- break;
- default:
+ else if (!phy_interface_mode_is_rgmii(phy_mode))
return -EINVAL;
- }
-
- /* Cancel Port Reset */
- ctrl &= ~MVNETA_GMAC2_PORT_RESET;
- mvreg_write(pp, MVNETA_GMAC_CTRL_2, ctrl);
-
- while ((mvreg_read(pp, MVNETA_GMAC_CTRL_2) &
- MVNETA_GMAC2_PORT_RESET) != 0)
- continue;
return 0;
}
--
2.7.4
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH 05/10] net: mvneta: add 1000BaseX support
2018-01-02 17:22 [PATCH 00/10] Convert mvneta to phylink Russell King - ARM Linux
` (3 preceding siblings ...)
2018-01-02 17:24 ` [PATCH 04/10] net: mvneta: move port configuration Russell King
@ 2018-01-02 17:24 ` Russell King
2018-01-02 17:24 ` [PATCH 06/10] net: mvneta: add flow control support Russell King
` (6 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Russell King @ 2018-01-02 17:24 UTC (permalink / raw)
To: Andrew Lunn, Florian Fainelli, Thomas Petazzoni; +Cc: netdev
Add support for 1000BaseX link modes.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
drivers/net/ethernet/marvell/mvneta.c | 59 +++++++++++++++++++++++++++++------
1 file changed, 50 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index ef54a8fc9515..73643dbd5cb0 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -189,6 +189,7 @@
#define MVNETA_GMAC_CTRL_0 0x2c00
#define MVNETA_GMAC_MAX_RX_SIZE_SHIFT 2
#define MVNETA_GMAC_MAX_RX_SIZE_MASK 0x7ffc
+#define MVNETA_GMAC0_PORT_1000BASE_X BIT(1)
#define MVNETA_GMAC0_PORT_ENABLE BIT(0)
#define MVNETA_GMAC_CTRL_2 0x2c08
#define MVNETA_GMAC2_INBAND_AN_ENABLE BIT(0)
@@ -210,9 +211,13 @@
#define MVNETA_GMAC_FORCE_LINK_DOWN BIT(0)
#define MVNETA_GMAC_FORCE_LINK_PASS BIT(1)
#define MVNETA_GMAC_INBAND_AN_ENABLE BIT(2)
+#define MVNETA_GMAC_AN_BYPASS_ENABLE BIT(3)
+#define MVNETA_GMAC_INBAND_RESTART_AN BIT(4)
#define MVNETA_GMAC_CONFIG_MII_SPEED BIT(5)
#define MVNETA_GMAC_CONFIG_GMII_SPEED BIT(6)
#define MVNETA_GMAC_AN_SPEED_EN BIT(7)
+#define MVNETA_GMAC_CONFIG_FLOW_CTRL BIT(8)
+#define MVNETA_GMAC_ADVERT_SYM_FLOW_CTRL BIT(9)
#define MVNETA_GMAC_AN_FLOW_CTRL_EN BIT(11)
#define MVNETA_GMAC_CONFIG_FULL_DUPLEX BIT(12)
#define MVNETA_GMAC_AN_DUPLEX_EN BIT(13)
@@ -3192,10 +3197,11 @@ static void mvneta_validate(struct net_device *ndev, unsigned long *supported,
{
__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
- /* We only support QSGMII, SGMII and RGMII modes */
+ /* We only support QSGMII, SGMII, 802.3z and RGMII modes */
if (state->interface != PHY_INTERFACE_MODE_NA &&
state->interface != PHY_INTERFACE_MODE_QSGMII &&
state->interface != PHY_INTERFACE_MODE_SGMII &&
+ !phy_interface_mode_is_8023z(state->interface) &&
!phy_interface_mode_is_rgmii(state->interface)) {
bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
return;
@@ -3208,10 +3214,14 @@ static void mvneta_validate(struct net_device *ndev, unsigned long *supported,
/* Half-duplex at speeds higher than 100Mbit is unsupported */
phylink_set(mask, 1000baseT_Full);
phylink_set(mask, 1000baseX_Full);
- phylink_set(mask, 10baseT_Half);
- phylink_set(mask, 10baseT_Full);
- phylink_set(mask, 100baseT_Half);
- phylink_set(mask, 100baseT_Full);
+
+ if (!phy_interface_mode_is_8023z(state->interface)) {
+ /* 10M and 100M are only supported in non-802.3z mode */
+ phylink_set(mask, 10baseT_Half);
+ phylink_set(mask, 10baseT_Full);
+ phylink_set(mask, 100baseT_Half);
+ phylink_set(mask, 100baseT_Full);
+ }
bitmap_and(supported, supported, mask,
__ETHTOOL_LINK_MODE_MASK_NBITS);
@@ -3243,14 +3253,27 @@ static int mvneta_mac_link_state(struct net_device *ndev,
return 1;
}
+static void mvneta_mac_an_restart(struct net_device *ndev)
+{
+ struct mvneta_port *pp = netdev_priv(ndev);
+ u32 gmac_an = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
+
+ mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG,
+ gmac_an | MVNETA_GMAC_INBAND_RESTART_AN);
+ mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG,
+ gmac_an & ~MVNETA_GMAC_INBAND_RESTART_AN);
+}
+
static void mvneta_mac_config(struct net_device *ndev, unsigned int mode,
const struct phylink_link_state *state)
{
struct mvneta_port *pp = netdev_priv(ndev);
+ u32 new_ctrl0, gmac_ctrl0 = mvreg_read(pp, MVNETA_GMAC_CTRL_0);
u32 new_ctrl2, gmac_ctrl2 = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
u32 new_clk, gmac_clk = mvreg_read(pp, MVNETA_GMAC_CLOCK_DIVIDER);
u32 new_an, gmac_an = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
+ new_ctrl0 = gmac_ctrl0 & ~MVNETA_GMAC0_PORT_1000BASE_X;
new_ctrl2 = gmac_ctrl2 & ~(MVNETA_GMAC2_INBAND_AN_ENABLE |
MVNETA_GMAC2_PORT_RESET);
new_clk = gmac_clk & ~MVNETA_GMAC_1MS_CLOCK_ENABLE;
@@ -3259,6 +3282,8 @@ static void mvneta_mac_config(struct net_device *ndev, unsigned int mode,
MVNETA_GMAC_CONFIG_MII_SPEED |
MVNETA_GMAC_CONFIG_GMII_SPEED |
MVNETA_GMAC_AN_SPEED_EN |
+ MVNETA_GMAC_ADVERT_SYM_FLOW_CTRL |
+ MVNETA_GMAC_CONFIG_FLOW_CTRL |
MVNETA_GMAC_AN_FLOW_CTRL_EN |
MVNETA_GMAC_CONFIG_FULL_DUPLEX |
MVNETA_GMAC_AN_DUPLEX_EN);
@@ -3269,7 +3294,8 @@ static void mvneta_mac_config(struct net_device *ndev, unsigned int mode,
new_ctrl2 |= MVNETA_GMAC2_PORT_RGMII;
if (state->interface == PHY_INTERFACE_MODE_QSGMII ||
- state->interface == PHY_INTERFACE_MODE_SGMII)
+ state->interface == PHY_INTERFACE_MODE_SGMII ||
+ phy_interface_mode_is_8023z(state->interface))
new_ctrl2 |= MVNETA_GMAC2_PCS_ENABLE;
if (!phylink_autoneg_inband(mode)) {
@@ -3281,7 +3307,7 @@ static void mvneta_mac_config(struct net_device *ndev, unsigned int mode,
new_an |= MVNETA_GMAC_CONFIG_GMII_SPEED;
else if (state->speed == SPEED_100)
new_an |= MVNETA_GMAC_CONFIG_MII_SPEED;
- } else {
+ } else if (state->interface == PHY_INTERFACE_MODE_SGMII) {
/* SGMII mode receives the state from the PHY */
new_ctrl2 |= MVNETA_GMAC2_INBAND_AN_ENABLE;
new_clk |= MVNETA_GMAC_1MS_CLOCK_ENABLE;
@@ -3290,18 +3316,31 @@ static void mvneta_mac_config(struct net_device *ndev, unsigned int mode,
MVNETA_GMAC_INBAND_AN_ENABLE |
MVNETA_GMAC_AN_SPEED_EN |
MVNETA_GMAC_AN_DUPLEX_EN;
+ } else {
+ /* 802.3z negotiation - only 1000base-X */
+ new_ctrl0 |= MVNETA_GMAC0_PORT_1000BASE_X;
+ new_clk |= MVNETA_GMAC_1MS_CLOCK_ENABLE;
+ new_an = (new_an & ~(MVNETA_GMAC_FORCE_LINK_DOWN |
+ MVNETA_GMAC_FORCE_LINK_PASS)) |
+ MVNETA_GMAC_INBAND_AN_ENABLE |
+ MVNETA_GMAC_CONFIG_GMII_SPEED |
+ /* The MAC only supports FD mode */
+ MVNETA_GMAC_CONFIG_FULL_DUPLEX;
}
/* Armada 370 documentation says we can only change the port mode
* and in-band enable when the link is down, so force it down
* while making these changes. We also do this for GMAC_CTRL2 */
- if ((new_ctrl2 ^ gmac_ctrl2) & MVNETA_GMAC2_INBAND_AN_ENABLE ||
+ if ((new_ctrl0 ^ gmac_ctrl0) & MVNETA_GMAC0_PORT_1000BASE_X ||
+ (new_ctrl2 ^ gmac_ctrl2) & MVNETA_GMAC2_INBAND_AN_ENABLE ||
(new_an ^ gmac_an) & MVNETA_GMAC_INBAND_AN_ENABLE) {
mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG,
(gmac_an & ~MVNETA_GMAC_FORCE_LINK_PASS) |
MVNETA_GMAC_FORCE_LINK_DOWN);
}
+ if (new_ctrl0 != gmac_ctrl0)
+ mvreg_write(pp, MVNETA_GMAC_CTRL_0, new_ctrl0);
if (new_ctrl2 != gmac_ctrl2)
mvreg_write(pp, MVNETA_GMAC_CTRL_2, new_ctrl2);
if (new_clk != gmac_clk)
@@ -3350,6 +3389,7 @@ static void mvneta_mac_link_up(struct net_device *ndev, unsigned int mode,
static const struct phylink_mac_ops mvneta_phylink_ops = {
.validate = mvneta_validate,
.mac_link_state = mvneta_mac_link_state,
+ .mac_an_restart = mvneta_mac_an_restart,
.mac_config = mvneta_mac_config,
.mac_link_down = mvneta_mac_link_down,
.mac_link_up = mvneta_mac_link_up,
@@ -4096,7 +4136,8 @@ static int mvneta_port_power_up(struct mvneta_port *pp, int phy_mode)
if (phy_mode == PHY_INTERFACE_MODE_QSGMII)
mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_QSGMII_SERDES_PROTO);
- else if (phy_mode == PHY_INTERFACE_MODE_SGMII)
+ else if (phy_mode == PHY_INTERFACE_MODE_SGMII ||
+ phy_mode == PHY_INTERFACE_MODE_1000BASEX)
mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_SGMII_SERDES_PROTO);
else if (!phy_interface_mode_is_rgmii(phy_mode))
return -EINVAL;
--
2.7.4
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH 06/10] net: mvneta: add flow control support
2018-01-02 17:22 [PATCH 00/10] Convert mvneta to phylink Russell King - ARM Linux
` (4 preceding siblings ...)
2018-01-02 17:24 ` [PATCH 05/10] net: mvneta: add 1000BaseX support Russell King
@ 2018-01-02 17:24 ` Russell King
2018-01-02 17:25 ` [PATCH 07/10] net: mvneta: add EEE support Russell King
` (5 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Russell King @ 2018-01-02 17:24 UTC (permalink / raw)
To: Andrew Lunn, Florian Fainelli, Thomas Petazzoni; +Cc: netdev
Add support for flow control to mvneta.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
drivers/net/ethernet/marvell/mvneta.c | 32 ++++++++++++++++++++++++++++++++
1 file changed, 32 insertions(+)
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 73643dbd5cb0..0b8701d3ba38 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -3211,6 +3211,8 @@ static void mvneta_validate(struct net_device *ndev, unsigned long *supported,
phylink_set(mask, Autoneg);
phylink_set_port_modes(mask);
+ /* Asymmetric pause is unsupported */
+ phylink_set(mask, Pause);
/* Half-duplex at speeds higher than 100Mbit is unsupported */
phylink_set(mask, 1000baseT_Full);
phylink_set(mask, 1000baseX_Full);
@@ -3249,6 +3251,10 @@ static int mvneta_mac_link_state(struct net_device *ndev,
state->duplex = !!(gmac_stat & MVNETA_GMAC_FULL_DUPLEX);
state->pause = 0;
+ if (gmac_stat & MVNETA_GMAC_RX_FLOW_CTRL_ENABLE)
+ state->pause |= MLO_PAUSE_RX;
+ if (gmac_stat & MVNETA_GMAC_TX_FLOW_CTRL_ENABLE)
+ state->pause |= MLO_PAUSE_TX;
return 1;
}
@@ -3298,6 +3304,11 @@ static void mvneta_mac_config(struct net_device *ndev, unsigned int mode,
phy_interface_mode_is_8023z(state->interface))
new_ctrl2 |= MVNETA_GMAC2_PCS_ENABLE;
+ if (phylink_test(state->advertising, Pause))
+ new_an |= MVNETA_GMAC_ADVERT_SYM_FLOW_CTRL;
+ if (state->pause & MLO_PAUSE_TXRX_MASK)
+ new_an |= MVNETA_GMAC_CONFIG_FLOW_CTRL;
+
if (!phylink_autoneg_inband(mode)) {
/* Phy or fixed speed */
if (state->duplex)
@@ -3326,6 +3337,9 @@ static void mvneta_mac_config(struct net_device *ndev, unsigned int mode,
MVNETA_GMAC_CONFIG_GMII_SPEED |
/* The MAC only supports FD mode */
MVNETA_GMAC_CONFIG_FULL_DUPLEX;
+
+ if (state->pause & MLO_PAUSE_AN && state->an_enabled)
+ new_an |= MVNETA_GMAC_AN_FLOW_CTRL_EN;
}
/* Armada 370 documentation says we can only change the port mode
@@ -3813,6 +3827,22 @@ static int mvneta_ethtool_set_ringparam(struct net_device *dev,
return 0;
}
+static void mvneta_ethtool_get_pauseparam(struct net_device *dev,
+ struct ethtool_pauseparam *pause)
+{
+ struct mvneta_port *pp = netdev_priv(dev);
+
+ phylink_ethtool_get_pauseparam(pp->phylink, pause);
+}
+
+static int mvneta_ethtool_set_pauseparam(struct net_device *dev,
+ struct ethtool_pauseparam *pause)
+{
+ struct mvneta_port *pp = netdev_priv(dev);
+
+ return phylink_ethtool_set_pauseparam(pp->phylink, pause);
+}
+
static void mvneta_ethtool_get_strings(struct net_device *netdev, u32 sset,
u8 *data)
{
@@ -4021,6 +4051,8 @@ static const struct ethtool_ops mvneta_eth_tool_ops = {
.get_drvinfo = mvneta_ethtool_get_drvinfo,
.get_ringparam = mvneta_ethtool_get_ringparam,
.set_ringparam = mvneta_ethtool_set_ringparam,
+ .get_pauseparam = mvneta_ethtool_get_pauseparam,
+ .set_pauseparam = mvneta_ethtool_set_pauseparam,
.get_strings = mvneta_ethtool_get_strings,
.get_ethtool_stats = mvneta_ethtool_get_stats,
.get_sset_count = mvneta_ethtool_get_sset_count,
--
2.7.4
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH 07/10] net: mvneta: add EEE support
2018-01-02 17:22 [PATCH 00/10] Convert mvneta to phylink Russell King - ARM Linux
` (5 preceding siblings ...)
2018-01-02 17:24 ` [PATCH 06/10] net: mvneta: add flow control support Russell King
@ 2018-01-02 17:25 ` Russell King
2018-01-02 17:25 ` [PATCH 08/10] net: mvneta: disable MVNETA_CAUSE_PSC_SYNC_CHANGE interrupt Russell King
` (4 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Russell King @ 2018-01-02 17:25 UTC (permalink / raw)
To: Andrew Lunn, Florian Fainelli, Thomas Petazzoni; +Cc: netdev
Add support for EEE to mvneta.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
drivers/net/ethernet/marvell/mvneta.c | 99 +++++++++++++++++++++++++++++++++--
1 file changed, 94 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 0b8701d3ba38..44d665887b50 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -244,6 +244,12 @@
#define MVNETA_TXQ_TOKEN_SIZE_REG(q) (0x3e40 + ((q) << 2))
#define MVNETA_TXQ_TOKEN_SIZE_MAX 0x7fffffff
+#define MVNETA_LPI_CTRL_0 0x2cc0
+#define MVNETA_LPI_CTRL_1 0x2cc4
+#define MVNETA_LPI_REQUEST_ENABLE BIT(0)
+#define MVNETA_LPI_CTRL_2 0x2cc8
+#define MVNETA_LPI_STATUS 0x2ccc
+
#define MVNETA_CAUSE_TXQ_SENT_DESC_ALL_MASK 0xff
/* Descriptor ring Macros */
@@ -320,6 +326,11 @@
#define MVNETA_RX_GET_BM_POOL_ID(rxd) \
(((rxd)->status & MVNETA_RXD_BM_POOL_MASK) >> MVNETA_RXD_BM_POOL_SHIFT)
+enum {
+ ETHTOOL_STAT_EEE_WAKEUP,
+ ETHTOOL_MAX_STATS,
+};
+
struct mvneta_statistic {
unsigned short offset;
unsigned short type;
@@ -328,6 +339,7 @@ struct mvneta_statistic {
#define T_REG_32 32
#define T_REG_64 64
+#define T_SW 1
static const struct mvneta_statistic mvneta_statistics[] = {
{ 0x3000, T_REG_64, "good_octets_received", },
@@ -362,6 +374,7 @@ static const struct mvneta_statistic mvneta_statistics[] = {
{ 0x304c, T_REG_32, "broadcast_frames_sent", },
{ 0x3054, T_REG_32, "fc_sent", },
{ 0x300c, T_REG_32, "internal_mac_transmit_err", },
+ { ETHTOOL_STAT_EEE_WAKEUP, T_SW, "eee_wakeup_errors", },
};
struct mvneta_pcpu_stats {
@@ -424,6 +437,10 @@ struct mvneta_port {
struct mvneta_bm_pool *pool_short;
int bm_win_id;
+ bool eee_enabled;
+ bool eee_active;
+ bool tx_lpi_enabled;
+
u64 ethtool_stats[ARRAY_SIZE(mvneta_statistics)];
u32 indir[MVNETA_RSS_LU_TABLE_SIZE];
@@ -3369,6 +3386,18 @@ static void mvneta_mac_config(struct net_device *ndev, unsigned int mode,
}
}
+static void mvneta_set_eee(struct mvneta_port *pp, bool enable)
+{
+ u32 lpi_ctl1;
+
+ lpi_ctl1 = mvreg_read(pp, MVNETA_LPI_CTRL_1);
+ if (enable)
+ lpi_ctl1 |= MVNETA_LPI_REQUEST_ENABLE;
+ else
+ lpi_ctl1 &= ~MVNETA_LPI_REQUEST_ENABLE;
+ mvreg_write(pp, MVNETA_LPI_CTRL_1, lpi_ctl1);
+}
+
static void mvneta_mac_link_down(struct net_device *ndev, unsigned int mode)
{
struct mvneta_port *pp = netdev_priv(ndev);
@@ -3382,6 +3411,9 @@ static void mvneta_mac_link_down(struct net_device *ndev, unsigned int mode)
val |= MVNETA_GMAC_FORCE_LINK_DOWN;
mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
}
+
+ pp->eee_active = false;
+ mvneta_set_eee(pp, false);
}
static void mvneta_mac_link_up(struct net_device *ndev, unsigned int mode,
@@ -3398,6 +3430,11 @@ static void mvneta_mac_link_up(struct net_device *ndev, unsigned int mode,
}
mvneta_port_up(pp);
+
+ if (phy && pp->eee_enabled) {
+ pp->eee_active = phy_init_eee(phy, 0) >= 0;
+ mvneta_set_eee(pp, pp->eee_active && pp->tx_lpi_enabled);
+ }
}
static const struct phylink_mac_ops mvneta_phylink_ops = {
@@ -3859,26 +3896,35 @@ static void mvneta_ethtool_update_stats(struct mvneta_port *pp)
{
const struct mvneta_statistic *s;
void __iomem *base = pp->base;
- u32 high, low, val;
- u64 val64;
+ u32 high, low;
+ u64 val;
int i;
for (i = 0, s = mvneta_statistics;
s < mvneta_statistics + ARRAY_SIZE(mvneta_statistics);
s++, i++) {
+ val = 0;
+
switch (s->type) {
case T_REG_32:
val = readl_relaxed(base + s->offset);
- pp->ethtool_stats[i] += val;
break;
case T_REG_64:
/* Docs say to read low 32-bit then high */
low = readl_relaxed(base + s->offset);
high = readl_relaxed(base + s->offset + 4);
- val64 = (u64)high << 32 | low;
- pp->ethtool_stats[i] += val64;
+ val = (u64)high << 32 | low;
+ break;
+ case T_SW:
+ switch (s->offset) {
+ case ETHTOOL_STAT_EEE_WAKEUP:
+ val = phylink_get_eee_err(pp->phylink);
+ break;
+ }
break;
}
+
+ pp->ethtool_stats[i] += val;
}
}
@@ -4031,6 +4077,47 @@ static int mvneta_ethtool_set_wol(struct net_device *dev,
return ret;
}
+static int mvneta_ethtool_get_eee(struct net_device *dev,
+ struct ethtool_eee *eee)
+{
+ struct mvneta_port *pp = netdev_priv(dev);
+ u32 lpi_ctl0;
+
+ lpi_ctl0 = mvreg_read(pp, MVNETA_LPI_CTRL_0);
+
+ eee->eee_enabled = pp->eee_enabled;
+ eee->eee_active = pp->eee_active;
+ eee->tx_lpi_enabled = pp->tx_lpi_enabled;
+ eee->tx_lpi_timer = (lpi_ctl0) >> 8; // * scale;
+
+ return phylink_ethtool_get_eee(pp->phylink, eee);
+}
+
+static int mvneta_ethtool_set_eee(struct net_device *dev,
+ struct ethtool_eee *eee)
+{
+ struct mvneta_port *pp = netdev_priv(dev);
+ u32 lpi_ctl0;
+
+ /* The Armada 37x documents do not give limits for this other than
+ * it being an 8-bit register. */
+ if (eee->tx_lpi_enabled &&
+ (eee->tx_lpi_timer < 0 || eee->tx_lpi_timer > 255))
+ return -EINVAL;
+
+ lpi_ctl0 = mvreg_read(pp, MVNETA_LPI_CTRL_0);
+ lpi_ctl0 &= ~(0xff << 8);
+ lpi_ctl0 |= eee->tx_lpi_timer << 8;
+ mvreg_write(pp, MVNETA_LPI_CTRL_0, lpi_ctl0);
+
+ pp->eee_enabled = eee->eee_enabled;
+ pp->tx_lpi_enabled = eee->tx_lpi_enabled;
+
+ mvneta_set_eee(pp, eee->tx_lpi_enabled && eee->eee_enabled);
+
+ return phylink_ethtool_set_eee(pp->phylink, eee);
+}
+
static const struct net_device_ops mvneta_netdev_ops = {
.ndo_open = mvneta_open,
.ndo_stop = mvneta_stop,
@@ -4064,6 +4151,8 @@ static const struct ethtool_ops mvneta_eth_tool_ops = {
.set_link_ksettings = mvneta_ethtool_set_link_ksettings,
.get_wol = mvneta_ethtool_get_wol,
.set_wol = mvneta_ethtool_set_wol,
+ .get_eee = mvneta_ethtool_get_eee,
+ .set_eee = mvneta_ethtool_set_eee,
};
/* Initialize hw */
--
2.7.4
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH 08/10] net: mvneta: disable MVNETA_CAUSE_PSC_SYNC_CHANGE interrupt
2018-01-02 17:22 [PATCH 00/10] Convert mvneta to phylink Russell King - ARM Linux
` (6 preceding siblings ...)
2018-01-02 17:25 ` [PATCH 07/10] net: mvneta: add EEE support Russell King
@ 2018-01-02 17:25 ` Russell King
2018-01-02 17:25 ` [PATCH 09/10] net: mvneta: add module EEPROM reading support Russell King
` (3 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Russell King @ 2018-01-02 17:25 UTC (permalink / raw)
To: Andrew Lunn, Florian Fainelli, Thomas Petazzoni; +Cc: netdev
The PSC sync change interrupt can fire multiple times while the link is
down, which is caused by noise on the serdes lines. As this isn't
information we make use of, it's pointless having the interrupt enabled.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
drivers/net/ethernet/marvell/mvneta.c | 12 ++++--------
1 file changed, 4 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 44d665887b50..6a018cfa36f6 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -2704,8 +2704,7 @@ static int mvneta_poll(struct napi_struct *napi, int budget)
mvreg_write(pp, MVNETA_INTR_MISC_CAUSE, 0);
if (cause_misc & (MVNETA_CAUSE_PHY_STATUS_CHANGE |
- MVNETA_CAUSE_LINK_CHANGE |
- MVNETA_CAUSE_PSC_SYNC_CHANGE))
+ MVNETA_CAUSE_LINK_CHANGE))
mvneta_link_change(pp);
}
@@ -3044,8 +3043,7 @@ static void mvneta_start_dev(struct mvneta_port *pp)
mvreg_write(pp, MVNETA_INTR_MISC_MASK,
MVNETA_CAUSE_PHY_STATUS_CHANGE |
- MVNETA_CAUSE_LINK_CHANGE |
- MVNETA_CAUSE_PSC_SYNC_CHANGE);
+ MVNETA_CAUSE_LINK_CHANGE);
phylink_start(pp->phylink);
netif_tx_start_all_queues(pp->dev);
@@ -3570,8 +3568,7 @@ static int mvneta_cpu_online(unsigned int cpu, struct hlist_node *node)
on_each_cpu(mvneta_percpu_unmask_interrupt, pp, true);
mvreg_write(pp, MVNETA_INTR_MISC_MASK,
MVNETA_CAUSE_PHY_STATUS_CHANGE |
- MVNETA_CAUSE_LINK_CHANGE |
- MVNETA_CAUSE_PSC_SYNC_CHANGE);
+ MVNETA_CAUSE_LINK_CHANGE);
netif_tx_start_all_queues(pp->dev);
spin_unlock(&pp->lock);
return 0;
@@ -3612,8 +3609,7 @@ static int mvneta_cpu_dead(unsigned int cpu, struct hlist_node *node)
on_each_cpu(mvneta_percpu_unmask_interrupt, pp, true);
mvreg_write(pp, MVNETA_INTR_MISC_MASK,
MVNETA_CAUSE_PHY_STATUS_CHANGE |
- MVNETA_CAUSE_LINK_CHANGE |
- MVNETA_CAUSE_PSC_SYNC_CHANGE);
+ MVNETA_CAUSE_LINK_CHANGE);
netif_tx_start_all_queues(pp->dev);
return 0;
}
--
2.7.4
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH 09/10] net: mvneta: add module EEPROM reading support
2018-01-02 17:22 [PATCH 00/10] Convert mvneta to phylink Russell King - ARM Linux
` (7 preceding siblings ...)
2018-01-02 17:25 ` [PATCH 08/10] net: mvneta: disable MVNETA_CAUSE_PSC_SYNC_CHANGE interrupt Russell King
@ 2018-01-02 17:25 ` Russell King
2018-01-02 17:25 ` [PATCH 10/10] net: phy: fixed-phy: remove fixed_phy_update_state() Russell King
` (2 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Russell King @ 2018-01-02 17:25 UTC (permalink / raw)
To: Andrew Lunn, Florian Fainelli, Thomas Petazzoni; +Cc: netdev
Add support for reading the SFF module's EEPROM via the ethtool API.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
drivers/net/ethernet/marvell/mvneta.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 6a018cfa36f6..25e9a551cc8c 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -4073,6 +4073,22 @@ static int mvneta_ethtool_set_wol(struct net_device *dev,
return ret;
}
+static int mvneta_ethtool_get_module_info(struct net_device *dev,
+ struct ethtool_modinfo *modinfo)
+{
+ struct mvneta_port *pp = netdev_priv(dev);
+
+ return phylink_ethtool_get_module_info(pp->phylink, modinfo);
+}
+
+static int mvneta_ethtool_get_module_eeprom(struct net_device *dev,
+ struct ethtool_eeprom *ee, u8 *buf)
+{
+ struct mvneta_port *pp = netdev_priv(dev);
+
+ return phylink_ethtool_get_module_eeprom(pp->phylink, ee, buf);
+}
+
static int mvneta_ethtool_get_eee(struct net_device *dev,
struct ethtool_eee *eee)
{
@@ -4147,6 +4163,8 @@ static const struct ethtool_ops mvneta_eth_tool_ops = {
.set_link_ksettings = mvneta_ethtool_set_link_ksettings,
.get_wol = mvneta_ethtool_get_wol,
.set_wol = mvneta_ethtool_set_wol,
+ .get_module_info = mvneta_ethtool_get_module_info,
+ .get_module_eeprom = mvneta_ethtool_get_module_eeprom,
.get_eee = mvneta_ethtool_get_eee,
.set_eee = mvneta_ethtool_set_eee,
};
--
2.7.4
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH 10/10] net: phy: fixed-phy: remove fixed_phy_update_state()
2018-01-02 17:22 [PATCH 00/10] Convert mvneta to phylink Russell King - ARM Linux
` (8 preceding siblings ...)
2018-01-02 17:25 ` [PATCH 09/10] net: mvneta: add module EEPROM reading support Russell King
@ 2018-01-02 17:25 ` Russell King
2018-01-02 17:27 ` [PATCH 00/10] Convert mvneta to phylink Russell King - ARM Linux
2018-01-03 15:39 ` David Miller
11 siblings, 0 replies; 13+ messages in thread
From: Russell King @ 2018-01-02 17:25 UTC (permalink / raw)
To: Andrew Lunn, Florian Fainelli, Thomas Petazzoni; +Cc: netdev
mvneta is the only user of fixed_phy_update_state(), which has been
converted to use phylink instead. Remove fixed_phy_update_state().
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
drivers/net/phy/fixed_phy.c | 31 -------------------------------
include/linux/phy_fixed.h | 9 ---------
2 files changed, 40 deletions(-)
diff --git a/drivers/net/phy/fixed_phy.c b/drivers/net/phy/fixed_phy.c
index eb5167210681..001fe1df7557 100644
--- a/drivers/net/phy/fixed_phy.c
+++ b/drivers/net/phy/fixed_phy.c
@@ -115,37 +115,6 @@ int fixed_phy_set_link_update(struct phy_device *phydev,
}
EXPORT_SYMBOL_GPL(fixed_phy_set_link_update);
-int fixed_phy_update_state(struct phy_device *phydev,
- const struct fixed_phy_status *status,
- const struct fixed_phy_status *changed)
-{
- struct fixed_mdio_bus *fmb = &platform_fmb;
- struct fixed_phy *fp;
-
- if (!phydev || phydev->mdio.bus != fmb->mii_bus)
- return -EINVAL;
-
- list_for_each_entry(fp, &fmb->phys, node) {
- if (fp->addr == phydev->mdio.addr) {
- write_seqcount_begin(&fp->seqcount);
-#define _UPD(x) if (changed->x) \
- fp->status.x = status->x
- _UPD(link);
- _UPD(speed);
- _UPD(duplex);
- _UPD(pause);
- _UPD(asym_pause);
-#undef _UPD
- fixed_phy_update(fp);
- write_seqcount_end(&fp->seqcount);
- return 0;
- }
- }
-
- return -ENOENT;
-}
-EXPORT_SYMBOL(fixed_phy_update_state);
-
int fixed_phy_add(unsigned int irq, int phy_addr,
struct fixed_phy_status *status,
int link_gpio)
diff --git a/include/linux/phy_fixed.h b/include/linux/phy_fixed.h
index cf6392de6eb0..ee54453a40a0 100644
--- a/include/linux/phy_fixed.h
+++ b/include/linux/phy_fixed.h
@@ -24,9 +24,6 @@ extern void fixed_phy_unregister(struct phy_device *phydev);
extern int fixed_phy_set_link_update(struct phy_device *phydev,
int (*link_update)(struct net_device *,
struct fixed_phy_status *));
-extern int fixed_phy_update_state(struct phy_device *phydev,
- const struct fixed_phy_status *status,
- const struct fixed_phy_status *changed);
#else
static inline int fixed_phy_add(unsigned int irq, int phy_id,
struct fixed_phy_status *status,
@@ -50,12 +47,6 @@ static inline int fixed_phy_set_link_update(struct phy_device *phydev,
{
return -ENODEV;
}
-static inline int fixed_phy_update_state(struct phy_device *phydev,
- const struct fixed_phy_status *status,
- const struct fixed_phy_status *changed)
-{
- return -ENODEV;
-}
#endif /* CONFIG_FIXED_PHY */
#endif /* __PHY_FIXED_H */
--
2.7.4
^ permalink raw reply related [flat|nested] 13+ messages in thread* Re: [PATCH 00/10] Convert mvneta to phylink
2018-01-02 17:22 [PATCH 00/10] Convert mvneta to phylink Russell King - ARM Linux
` (9 preceding siblings ...)
2018-01-02 17:25 ` [PATCH 10/10] net: phy: fixed-phy: remove fixed_phy_update_state() Russell King
@ 2018-01-02 17:27 ` Russell King - ARM Linux
2018-01-03 15:39 ` David Miller
11 siblings, 0 replies; 13+ messages in thread
From: Russell King - ARM Linux @ 2018-01-02 17:27 UTC (permalink / raw)
To: Andrew Lunn, Florian Fainelli, Thomas Petazzoni; +Cc: netdev
On Tue, Jan 02, 2018 at 05:22:42PM +0000, Russell King - ARM Linux wrote:
> Hi,
>
> This series converts mvneta to use phylink, which is necessary to
> support the SFP cages on SolidRun's Clearfog platform. This series just
> converts mvneta without adding the DT parts - having discussed with
> Andrew, we believe we're too close to the merge window to submit that
> patch.
>
> I've split the "net: mvneta: convert to phylink" patch up to make it
> easier to review, and in doing so, spotted some minor corner cases that
> needed to be fixed along the way.
>
> This series depends on the previously merged phylink patches in netdev,
> along with the recently reviewed 7 patch series "Resolve races in phy
> accessors" without which, the race described in patch 5 of that series
> is very evident when triggering a dummy hibernate cycle.
>
> This series also illustrates how to convert mvpp2 to phylink.
>
> mvneta is the only user of the fixed_phy_update_state() API, and this
> becomes redundant with the conversion.
>
> It would be good to get this series not only reviewed, but also
> independently tested to ensure that I haven't missed anything - I only
> have the Clearfog platform to test on, and that doesn't support all the
> different interface modes that mvneta supports.
>
> A particularly interesting side effect of this series is that DSA
> switches no longer need the "CPU" port and DSA facing MAC ethernet
> instance to be marked as a fixed link anymore with mvneta - we can use
> 1000BaseX mode, and the DSA to CPU link will use the 802.3z negotiation
> to determine the link properties without needing the link parameters to
> be explicitly stated in DT - that is a subject of a future patch.
>
> drivers/net/ethernet/marvell/Kconfig | 2 +-
> drivers/net/ethernet/marvell/mvneta.c | 687 ++++++++++++++++++++--------------
> drivers/net/phy/fixed_phy.c | 31 --
> include/linux/phy_fixed.h | 9 -
> 4 files changed, 405 insertions(+), 324 deletions(-)
Of course, this series is for net-next, not net... forgot to add that
annotation, sorry.
--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 8.8Mbps down 630kbps up
According to speedtest.net: 8.21Mbps down 510kbps up
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: [PATCH 00/10] Convert mvneta to phylink
2018-01-02 17:22 [PATCH 00/10] Convert mvneta to phylink Russell King - ARM Linux
` (10 preceding siblings ...)
2018-01-02 17:27 ` [PATCH 00/10] Convert mvneta to phylink Russell King - ARM Linux
@ 2018-01-03 15:39 ` David Miller
11 siblings, 0 replies; 13+ messages in thread
From: David Miller @ 2018-01-03 15:39 UTC (permalink / raw)
To: linux; +Cc: andrew, f.fainelli, thomas.petazzoni, netdev
From: Russell King - ARM Linux <linux@armlinux.org.uk>
Date: Tue, 2 Jan 2018 17:22:42 +0000
> This series converts mvneta to use phylink, which is necessary to
> support the SFP cages on SolidRun's Clearfog platform. This series just
> converts mvneta without adding the DT parts - having discussed with
> Andrew, we believe we're too close to the merge window to submit that
> patch.
>
> I've split the "net: mvneta: convert to phylink" patch up to make it
> easier to review, and in doing so, spotted some minor corner cases that
> needed to be fixed along the way.
>
> This series depends on the previously merged phylink patches in netdev,
> along with the recently reviewed 7 patch series "Resolve races in phy
> accessors" without which, the race described in patch 5 of that series
> is very evident when triggering a dummy hibernate cycle.
>
> This series also illustrates how to convert mvpp2 to phylink.
>
> mvneta is the only user of the fixed_phy_update_state() API, and this
> becomes redundant with the conversion.
>
> It would be good to get this series not only reviewed, but also
> independently tested to ensure that I haven't missed anything - I only
> have the Clearfog platform to test on, and that doesn't support all the
> different interface modes that mvneta supports.
>
> A particularly interesting side effect of this series is that DSA
> switches no longer need the "CPU" port and DSA facing MAC ethernet
> instance to be marked as a fixed link anymore with mvneta - we can use
> 1000BaseX mode, and the DSA to CPU link will use the 802.3z negotiation
> to determine the link properties without needing the link parameters to
> be explicitly stated in DT - that is a subject of a future patch.
This looks good to me, series applied, thanks Russell.
^ permalink raw reply [flat|nested] 13+ messages in thread