[PATCH net-next 2/3] net: systemport: Remove short packet padding

[Florian Fainelli <f.fainelli@gmail.com>]

Short packet padding added to the driver is only necessary when using
Broadcom tags, but since this is now taken care of net/dsa/tag_brcm.c,
we are guaranteed being given correctly padded packets.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/ethernet/broadcom/bcmsysport.c | 12 ------------
 1 file changed, 12 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c
index 087f01b4dc3a..f15a8fc6dfc9 100644
--- a/drivers/net/ethernet/broadcom/bcmsysport.c
+++ b/drivers/net/ethernet/broadcom/bcmsysport.c
@@ -1216,18 +1216,6 @@ static netdev_tx_t bcm_sysport_xmit(struct sk_buff *skb,
 		goto out;
 	}
 
-	/* The Ethernet switch we are interfaced with needs packets to be at
-	 * least 64 bytes (including FCS) otherwise they will be discarded when
-	 * they enter the switch port logic. When Broadcom tags are enabled, we
-	 * need to make sure that packets are at least 68 bytes
-	 * (including FCS and tag) because the length verification is done after
-	 * the Broadcom tag is stripped off the ingress packet.
-	 */
-	if (skb_put_padto(skb, ETH_ZLEN + ENET_BRCM_TAG_LEN)) {
-		ret = NETDEV_TX_OK;
-		goto out;
-	}
-
 	/* Insert TSB and checksum infos */
 	if (priv->tsb_en) {
 		skb = bcm_sysport_insert_tsb(skb, dev);
-- 
2.14.1