[PATCH 3.2 01/06] "bridge should send gratuitous ARP to notify peer while a bond, which is a port of this bridge, changes."

[PATCH 3.2 01/06] "bridge should send gratuitous ARP to notify peer while a bond, which is a port of this bridge, changes."

[邢庆杰]

[-- Attachment #1.1: Type: text/plain, Size: 1626 bytes --]

We create bond0 and add eth0&eth1 as slaves. Eth0 is active. Then we add
bond0
into br0 as a bridge port. Br0 has ip address. When eth0 is down, after
bond0's
failover eth1 become active. At this moment, we need br0 send a gratuitous
ARP
to notify peer to update ARP table.

Signed-off-by: Xing.Qingjie <xqjcool@gmail.com>
---
 net/bridge/br_notify.c |   12 ++++++++++++
 1 files changed, 12 insertions(+), 0 deletions(-)
diff --git a/net/bridge/br_notify.c b/net/bridge/br_notify.c
index a76b621..90cf123 100644
--- a/net/bridge/br_notify.c
+++ b/net/bridge/br_notify.c
@@ -34,6 +34,7 @@ static int br_device_event(struct notifier_block *unused,
unsigned long event, v
        struct net_device *dev = ptr;
        struct net_bridge_port *p;
        struct net_bridge *br;
+       struct in_device *in_dev;
        bool changed_addr;
        int err;
@@ -102,6 +103,17 @@ static int br_device_event(struct notifier_block
*unused, unsigned long event, v
        case NETDEV_PRE_TYPE_CHANGE:
                /* Forbid underlaying device to change its type. */
                return NOTIFY_BAD;
+
+       case NETDEV_NOTIFY_PEERS:
+               /* Send gratuitous arp while bond,a port of bridge, changes
*/
+               if (dev->priv_flags & IFF_BONDING && dev->flags &
IFF_MASTER) {
+                       in_dev = __in_dev_get_rtnl(br->dev);
+
+                       ASSERT_RTNL();
+                       if (in_dev)
+                               inetdev_send_gratuitous_arp(br->dev,
in_dev);
+               }
+               break;
        }
        /* Events that may cause spanning tree to refresh */
--
1.7.1

[-- Attachment #1.2: Type: text/html, Size: 2151 bytes --]

[-- Attachment #2: 0001-bridge-should-send-gratuitous-ARP-to-notify-peer-whi.patch --]
[-- Type: application/octet-stream, Size: 1678 bytes --]

From 3040990542ca5e4276f9d9215d4556c9e22cc581 Mon Sep 17 00:00:00 2001
From: Xing.Qingjie <xqjcool@gmail.com>
Date: Wed, 6 Sep 2017 04:03:25 +0800
Subject: [PATCH] bridge should send gratuitous ARP to notify peer while a bond, which
 is a port of this bridge, changes.

We create bond0 and add eth0&eth1 as slaves. Eth0 is active. Then we add bond0
into br0 as a bridge port. Br0 has ip address. When eth0 is down, after bond0's
failover eth1 become active. At this moment, we need br0 send a gratuitous ARP
to notify peer to update ARP table.

Signed-off-by: Xing.Qingjie <xqjcool@gmail.com>
---
 net/bridge/br_notify.c |   12 ++++++++++++
 1 files changed, 12 insertions(+), 0 deletions(-)

diff --git a/net/bridge/br_notify.c b/net/bridge/br_notify.c
index a76b621..90cf123 100644
--- a/net/bridge/br_notify.c
+++ b/net/bridge/br_notify.c
@@ -34,6 +34,7 @@ static int br_device_event(struct notifier_block *unused, unsigned long event, v
 	struct net_device *dev = ptr;
 	struct net_bridge_port *p;
 	struct net_bridge *br;
+	struct in_device *in_dev;
 	bool changed_addr;
 	int err;
 
@@ -102,6 +103,17 @@ static int br_device_event(struct notifier_block *unused, unsigned long event, v
 	case NETDEV_PRE_TYPE_CHANGE:
 		/* Forbid underlaying device to change its type. */
 		return NOTIFY_BAD;
+
+	case NETDEV_NOTIFY_PEERS:
+		/* Send gratuitous arp while bond,a port of bridge, changes */
+		if (dev->priv_flags & IFF_BONDING && dev->flags & IFF_MASTER) {
+			in_dev = __in_dev_get_rtnl(br->dev);
+
+			ASSERT_RTNL();
+			if (in_dev)
+				inetdev_send_gratuitous_arp(br->dev, in_dev);
+		}
+		break;
 	}
 
 	/* Events that may cause spanning tree to refresh */
-- 
1.7.1

Re: [PATCH 3.2 01/06] "bridge should send gratuitous ARP to notify peer while a bond, which is a port of this bridge, changes."

[Stephen Hemminger]

On Sat, 6 Jan 2018 17:25:20 +0800
邢庆杰 <xqjcool@gmail.com> wrote:

> We create bond0 and add eth0&eth1 as slaves. Eth0 is active. Then we add
> bond0
> into br0 as a bridge port. Br0 has ip address. When eth0 is down, after
> bond0's
> failover eth1 become active. At this moment, we need br0 send a gratuitous
> ARP
> to notify peer to update ARP table.
> 
> Signed-off-by: Xing.Qingjie <xqjcool@gmail.com>
> ---
>  net/bridge/br_notify.c |   12 ++++++++++++
>  1 files changed, 12 insertions(+), 0 deletions(-)
> diff --git a/net/bridge/br_notify.c b/net/bridge/br_notify.c
> index a76b621..90cf123 100644
> --- a/net/bridge/br_notify.c
> +++ b/net/bridge/br_notify.c
> @@ -34,6 +34,7 @@ static int br_device_event(struct notifier_block *unused,
> unsigned long event, v
>         struct net_device *dev = ptr;
>         struct net_bridge_port *p;
>         struct net_bridge *br;
> +       struct in_device *in_dev;
>         bool changed_addr;
>         int err;
> @@ -102,6 +103,17 @@ static int br_device_event(struct notifier_block
> *unused, unsigned long event, v
>         case NETDEV_PRE_TYPE_CHANGE:
>                 /* Forbid underlaying device to change its type. */
>                 return NOTIFY_BAD;
> +
> +       case NETDEV_NOTIFY_PEERS:
> +               /* Send gratuitous arp while bond,a port of bridge, changes
> */
> +               if (dev->priv_flags & IFF_BONDING && dev->flags &
> IFF_MASTER) {
> +                       in_dev = __in_dev_get_rtnl(br->dev);
> +
> +                       ASSERT_RTNL();
> +                       if (in_dev)
> +                               inetdev_send_gratuitous_arp(br->dev,
> in_dev);
> +               }
> +               break;
>         }
>         /* Events that may cause spanning tree to refresh */
> --
> 1.7.1

Thanks for your patch.

There is no reason a bridge has to have an IP address.
This should be done in bonding device, doing it here is error prone.
Plus there are many more layered devices than bonding.

The patch also has many formatting issues.
Your mail client mangles patches.
Conditional expressions with & and && should have parenthesis.