From: Mike Maloney <maloneykernel@gmail.com>
To: netdev@vger.kernel.org, davem@davemloft.net
Cc: eric.dumazet@gmail.com, Mike Maloney <maloney@google.com>
Subject: [PATCH net] ipv6: fix udpv6 sendmsg crash caused by too small MTU
Date: Wed, 10 Jan 2018 12:45:10 -0500 [thread overview]
Message-ID: <20180110174510.138752-1-maloneykernel@gmail.com> (raw)
From: Mike Maloney <maloney@google.com>
The logic in __ip6_append_data() assumes that the MTU is at least large
enough for the headers. A device's MTU may be adjusted after being
added while sendmsg() is processing data, resulting in
__ip6_append_data() seeing any MTU. For an mtu smaller than the size of
the fragmentation header, the math results in a negative 'maxfraglen',
which causes problems when refragmenting any previous skb in the
skb_write_queue, leaving it possibly malformed.
Instead sendmsg returns EINVAL when the mtu is calculated to be less
than IPV6_MIN_MTU.
Found by syzkaller:
kernel BUG at ./include/linux/skbuff.h:2064!
invalid opcode: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
(ftrace buffer empty)
Modules linked in:
CPU: 1 PID: 14216 Comm: syz-executor5 Not tainted 4.13.0-rc4+ #2
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
task: ffff8801d0b68580 task.stack: ffff8801ac6b8000
RIP: 0010:__skb_pull include/linux/skbuff.h:2064 [inline]
RIP: 0010:__ip6_make_skb+0x18cf/0x1f70 net/ipv6/ip6_output.c:1617
RSP: 0018:ffff8801ac6bf570 EFLAGS: 00010216
RAX: 0000000000010000 RBX: 0000000000000028 RCX: ffffc90003cce000
RDX: 00000000000001b8 RSI: ffffffff839df06f RDI: ffff8801d9478ca0
RBP: ffff8801ac6bf780 R08: ffff8801cc3f1dbc R09: 0000000000000000
R10: ffff8801ac6bf7a0 R11: 43cb4b7b1948a9e7 R12: ffff8801cc3f1dc8
R13: ffff8801cc3f1d40 R14: 0000000000001036 R15: dffffc0000000000
FS: 00007f43d740c700(0000) GS:ffff8801dc100000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7834984000 CR3: 00000001d79b9000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
ip6_finish_skb include/net/ipv6.h:911 [inline]
udp_v6_push_pending_frames+0x255/0x390 net/ipv6/udp.c:1093
udpv6_sendmsg+0x280d/0x31a0 net/ipv6/udp.c:1363
inet_sendmsg+0x11f/0x5e0 net/ipv4/af_inet.c:762
sock_sendmsg_nosec net/socket.c:633 [inline]
sock_sendmsg+0xca/0x110 net/socket.c:643
SYSC_sendto+0x352/0x5a0 net/socket.c:1750
SyS_sendto+0x40/0x50 net/socket.c:1718
entry_SYSCALL_64_fastpath+0x1f/0xbe
RIP: 0033:0x4512e9
RSP: 002b:00007f43d740bc08 EFLAGS: 00000216 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00000000007180a8 RCX: 00000000004512e9
RDX: 000000000000002e RSI: 0000000020d08000 RDI: 0000000000000005
RBP: 0000000000000086 R08: 00000000209c1000 R09: 000000000000001c
R10: 0000000000040800 R11: 0000000000000216 R12: 00000000004b9c69
R13: 00000000ffffffff R14: 0000000000000005 R15: 00000000202c2000
Code: 9e 01 fe e9 c5 e8 ff ff e8 7f 9e 01 fe e9 4a ea ff ff 48 89 f7 e8 52 9e 01 fe e9 aa eb ff ff e8 a8 b6 cf fd 0f 0b e8 a1 b6 cf fd <0f> 0b 49 8d 45 78 4d 8d 45 7c 48 89 85 78 fe ff ff 49 8d 85 ba
RIP: __skb_pull include/linux/skbuff.h:2064 [inline] RSP: ffff8801ac6bf570
RIP: __ip6_make_skb+0x18cf/0x1f70 net/ipv6/ip6_output.c:1617 RSP: ffff8801ac6bf570
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Mike Maloney <maloney@google.com>
---
Depends on eric.dumazet@gmail.com's prior fix or leaks a dst reference.
https://patchwork.ozlabs.org/patch/858234/
(ipv6: fix possible mem leaks in ipv6_make_skb())
net/ipv6/ip6_output.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index f7dd51c42314..f309ce7120d0 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -1206,14 +1206,16 @@ static int ip6_setup_cork(struct sock *sk, struct inet_cork_full *cork,
v6_cork->tclass = ipc6->tclass;
if (rt->dst.flags & DST_XFRM_TUNNEL)
mtu = np->pmtudisc >= IPV6_PMTUDISC_PROBE ?
- rt->dst.dev->mtu : dst_mtu(&rt->dst);
+ READ_ONCE(rt->dst.dev->mtu) : dst_mtu(&rt->dst);
else
mtu = np->pmtudisc >= IPV6_PMTUDISC_PROBE ?
- rt->dst.dev->mtu : dst_mtu(rt->dst.path);
+ READ_ONCE(rt->dst.dev->mtu) : dst_mtu(rt->dst.path);
if (np->frag_size < mtu) {
if (np->frag_size)
mtu = np->frag_size;
}
+ if (mtu < IPV6_MIN_MTU)
+ return -EINVAL;
cork->base.fragsize = mtu;
if (dst_allfrag(rt->dst.path))
cork->base.flags |= IPCORK_ALLFRAG;
--
2.16.0.rc1.238.g530d649a79-goog
next reply other threads:[~2018-01-10 17:45 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-10 17:45 Mike Maloney [this message]
2018-01-10 18:56 ` [PATCH net] ipv6: fix udpv6 sendmsg crash caused by too small MTU Eric Dumazet
2018-01-15 18:30 ` David Miller
-- strict thread matches above, loose matches on Subject: below --
2018-01-10 17:10 Mike Maloney
2018-01-10 17:21 ` Eric Dumazet
2018-01-10 17:43 ` Mike Maloney
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180110174510.138752-1-maloneykernel@gmail.com \
--to=maloneykernel@gmail.com \
--cc=davem@davemloft.net \
--cc=eric.dumazet@gmail.com \
--cc=maloney@google.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).