[net-next v3 14/14] i40e: track id can be 0

[Jeff Kirsher <jeffrey.t.kirsher@intel.com>]

From: Jingjing Wu <jingjing.wu@intel.com>

track_id == 0 is valid for “read only” profiles when
profile does not have any “write” commands.

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_common.c   | 5 -----
 drivers/net/ethernet/intel/i40evf/i40e_common.c | 5 -----
 2 files changed, 10 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_common.c b/drivers/net/ethernet/intel/i40e/i40e_common.c
index a196c3d305ab..40c5f7628aa1 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_common.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_common.c
@@ -5364,11 +5364,6 @@ i40e_write_profile(struct i40e_hw *hw, struct i40e_profile_segment *profile,
 	u32 offset = 0, info = 0;
 	u32 i;
 
-	if (!track_id) {
-		i40e_debug(hw, I40E_DEBUG_PACKAGE, "Track_id can't be 0.");
-		return I40E_NOT_SUPPORTED;
-	}
-
 	dev_cnt = profile->device_table_count;
 
 	for (i = 0; i < dev_cnt; i++) {
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_common.c b/drivers/net/ethernet/intel/i40evf/i40e_common.c
index c1e473219957..a94648429a5b 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_common.c
+++ b/drivers/net/ethernet/intel/i40evf/i40e_common.c
@@ -1330,11 +1330,6 @@ i40evf_write_profile(struct i40e_hw *hw, struct i40e_profile_segment *profile,
 	u32 offset = 0, info = 0;
 	u32 i;
 
-	if (!track_id) {
-		i40e_debug(hw, I40E_DEBUG_PACKAGE, "Track_id can't be 0.");
-		return I40E_NOT_SUPPORTED;
-	}
-
 	dev_cnt = profile->device_table_count;
 
 	for (i = 0; i < dev_cnt; i++) {
-- 
2.15.1