netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mika Westerberg <mika.westerberg@linux.intel.com>
To: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Ferenc Boldog <ferenc.boldog@gmail.com>,
	Nikolay Bogoychev <nheart@gmail.com>,
	Mika Westerberg <mika.westerberg@linux.intel.com>,
	intel-wired-lan@lists.osuosl.org, netdev@vger.kernel.org
Subject: [PATCH] igb: Do not call netif_device_detach() when PCIe link goes missing
Date: Tue, 23 Jan 2018 13:28:41 +0300	[thread overview]
Message-ID: <20180123102841.9350-1-mika.westerberg@linux.intel.com> (raw)

When the driver notices that PCIe link is gone by reading 0xffffffff
from a register it clears hw->hw_addr and then calls netif_device_detach().
This happens when the PCIe device is physically unplugged for example
the user disconnected the Thunderbolt cable.

However, netif_device_detach() prevents netif_unregister() from bringing
the device down properly including tearing down MSI-X vectors. This
triggers following crash during the driver removal:

  igb 0000:0b:00.0 enp11s0f0: PCIe link lost, device now detached
  ------------[ cut here ]------------
  kernel BUG at drivers/pci/msi.c:352!
  invalid opcode: 0000 [#1] PREEMPT SMP PTI
  ...
  Call Trace:
   pci_disable_msix+0xc9/0xf0
   igb_reset_interrupt_capability+0x58/0x60 [igb]
   igb_remove+0x90/0x100 [igb]
   pci_device_remove+0x31/0xa0
   device_release_driver_internal+0x152/0x210
   pci_stop_bus_device+0x78/0xa0
   pci_stop_bus_device+0x38/0xa0
   pci_stop_bus_device+0x38/0xa0
   pci_stop_bus_device+0x26/0xa0
   pci_stop_bus_device+0x38/0xa0
   pci_stop_and_remove_bus_device+0x9/0x20
   trim_stale_devices+0xee/0x130
   ? _raw_spin_unlock_irqrestore+0xf/0x30
   trim_stale_devices+0x8f/0x130
   ? _raw_spin_unlock_irqrestore+0xf/0x30
   trim_stale_devices+0xa1/0x130
   ? get_slot_status+0x8b/0xc0
   acpiphp_check_bridge.part.7+0xf9/0x140
   acpiphp_hotplug_notify+0x170/0x1f0
   ...

To prevent the crash do not call netif_device_detach() in igb_rd32().
This should be fine because hw->hw_addr is set to NULL preventing future
hardware access of the now missing device.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=198181
Reported-by: Ferenc Boldog <ferenc.boldog@gmail.com>
Reported-by: Nikolay Bogoychev <nheart@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
---
 drivers/net/ethernet/intel/igb/igb_main.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index c208753ff5b7..b1de866e70b2 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -774,8 +774,7 @@ u32 igb_rd32(struct e1000_hw *hw, u32 reg)
 	if (!(~value) && (!reg || !(~readl(hw_addr)))) {
 		struct net_device *netdev = igb->netdev;
 		hw->hw_addr = NULL;
-		netif_device_detach(netdev);
-		netdev_err(netdev, "PCIe link lost, device now detached\n");
+		netdev_err(netdev, "PCIe link lost\n");
 	}
 
 	return value;
-- 
2.15.1

             reply	other threads:[~2018-01-23 10:28 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-23 10:28 Mika Westerberg [this message]
2018-02-02 23:25 ` [PATCH] igb: Do not call netif_device_detach() when PCIe link goes missing Brown, Aaron F

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180123102841.9350-1-mika.westerberg@linux.intel.com \
    --to=mika.westerberg@linux.intel.com \
    --cc=ferenc.boldog@gmail.com \
    --cc=intel-wired-lan@lists.osuosl.org \
    --cc=jeffrey.t.kirsher@intel.com \
    --cc=netdev@vger.kernel.org \
    --cc=nheart@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).