netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andy Spencer <aspencer@spacex.com>
To: <netdev@vger.kernel.org>
Cc: Claudiu Manoil <claudiu.manoil@freescale.com>
Subject: [PATCH net] gianfar: prevent integer wrapping in the rx handler
Date: Thu, 25 Jan 2018 19:37:50 -0800	[thread overview]
Message-ID: <20180126033750.GA93486@a.spacex.corp> (raw)

When the frame check sequence (FCS) is split across the last two frames
of a fragmented packet, part of the FCS gets counted twice, once when
subtracting the FCS, and again when subtracting the previously received
data.

For example, if 1602 bytes are received, and the first fragment contains
the first 1600 bytes (including the first two bytes of the FCS), and the
second fragment contains the last two bytes of the FCS:

  'skb->len == 1600' from the first fragment

  size  = lstatus & BD_LENGTH_MASK; # 1602
  size -= ETH_FCS_LEN;              # 1598
  size -= skb->len;                 # -2

Since the size is unsigned, it wraps around and causes a BUG later in
the packet handling, as shown below:

  kernel BUG at ./include/linux/skbuff.h:2068!
  Oops: Exception in kernel mode, sig: 5 [#1]
  ...
  NIP [c021ec60] skb_pull+0x24/0x44
  LR [c01e2fbc] gfar_clean_rx_ring+0x498/0x690
  Call Trace:
  [df7edeb0] [c01e2c1c] gfar_clean_rx_ring+0xf8/0x690 (unreliable)
  [df7edf20] [c01e33a8] gfar_poll_rx_sq+0x3c/0x9c
  [df7edf40] [c023352c] net_rx_action+0x21c/0x274
  [df7edf90] [c0329000] __do_softirq+0xd8/0x240
  [df7edff0] [c000c108] call_do_irq+0x24/0x3c
  [c0597e90] [c00041dc] do_IRQ+0x64/0xc4
  [c0597eb0] [c000d920] ret_from_except+0x0/0x18
  --- interrupt: 501 at arch_cpu_idle+0x24/0x5c

Change the size to a signed integer and then trim off any part of the
FCS that was received prior to the last fragment.

Fixes: 6c389fc931bc ("gianfar: fix size of scatter-gathered frames")
Signed-off-by: Andy Spencer <aspencer@spacex.com>
---
 drivers/net/ethernet/freescale/gianfar.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index 7f83700..3bdeb29 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -2932,7 +2932,7 @@ static irqreturn_t gfar_transmit(int irq, void *grp_id)
 static bool gfar_add_rx_frag(struct gfar_rx_buff *rxb, u32 lstatus,
 			     struct sk_buff *skb, bool first)
 {
-	unsigned int size = lstatus & BD_LENGTH_MASK;
+	int size = lstatus & BD_LENGTH_MASK;
 	struct page *page = rxb->page;
 	bool last = !!(lstatus & BD_LFLAG(RXBD_LAST));
 
@@ -2947,11 +2947,16 @@ static bool gfar_add_rx_frag(struct gfar_rx_buff *rxb, u32 lstatus,
 		if (last)
 			size -= skb->len;
 
-		/* in case the last fragment consisted only of the FCS */
+		/* Add the last fragment if it contains something other than
+		 * the FCS, otherwise drop it and trim off any part of the FCS
+		 * that was already received.
+		 */
 		if (size > 0)
 			skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page,
 					rxb->page_offset + RXBUF_ALIGNMENT,
 					size, GFAR_RXB_TRUESIZE);
+		else if (size < 0)
+			pskb_trim(skb, skb->len + size);
 	}
 
 	/* try reuse page */
-- 
2.7.4

             reply	other threads:[~2018-01-26  3:47 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-26  3:37 Andy Spencer [this message]
2018-01-29 19:17 ` [PATCH net] gianfar: prevent integer wrapping in the rx handler David Miller
2018-01-30 16:31   ` Claudiu Manoil

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180126033750.GA93486@a.spacex.corp \
    --to=aspencer@spacex.com \
    --cc=claudiu.manoil@freescale.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).