Netdev List
 help / color / mirror / Atom feed
From: Benjamin Poirier <bpoirier@suse.com>
To: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: intel-wired-lan@lists.osuosl.org, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH net] e1000e: Remove Other from EIAC.
Date: Wed, 31 Jan 2018 16:26:27 +0900	[thread overview]
Message-ID: <20180131072627.18305-1-bpoirier@suse.com> (raw)

It was reported that emulated e1000e devices in vmware esxi 6.5 Build
7526125 do not link up after commit 4aea7a5c5e94 ("e1000e: Avoid receiver
overrun interrupt bursts", v4.15-rc1). Some tracing shows that after
e1000e_trigger_lsc() is called, ICR reads out as 0x0 in e1000_msix_other()
on emulated e1000e devices. In comparison, on real e1000e 82574 hardware,
icr=0x80000004 (_INT_ASSERTED | _LSC) in the same situation.

Some experimentation showed that this flaw in vmware e1000e emulation can
be worked around by not setting Other in EIAC. This is how it was before
16ecba59bc33 ("e1000e: Do not read ICR in Other interrupt", v4.5-rc1).

Fixes: 4aea7a5c5e94 ("e1000e: Avoid receiver overrun interrupt bursts")
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
---
 drivers/net/ethernet/intel/e1000e/netdev.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 9f18d39bdc8f..625a4c9a86a4 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -1918,6 +1918,8 @@ static irqreturn_t e1000_msix_other(int __always_unused irq, void *data)
 	bool enable = true;
 
 	icr = er32(ICR);
+	ew32(ICR, E1000_ICR_OTHER);
+
 	if (icr & E1000_ICR_RXO) {
 		ew32(ICR, E1000_ICR_RXO);
 		enable = false;
@@ -2040,7 +2042,6 @@ static void e1000_configure_msix(struct e1000_adapter *adapter)
 		       hw->hw_addr + E1000_EITR_82574(vector));
 	else
 		writel(1, hw->hw_addr + E1000_EITR_82574(vector));
-	adapter->eiac_mask |= E1000_IMS_OTHER;
 
 	/* Cause Tx interrupts on every write back */
 	ivar |= BIT(31);
@@ -2265,7 +2266,7 @@ static void e1000_irq_enable(struct e1000_adapter *adapter)
 
 	if (adapter->msix_entries) {
 		ew32(EIAC_82574, adapter->eiac_mask & E1000_EIAC_MASK_82574);
-		ew32(IMS, adapter->eiac_mask | E1000_IMS_LSC);
+		ew32(IMS, adapter->eiac_mask | E1000_IMS_OTHER | E1000_IMS_LSC);
 	} else if (hw->mac.type >= e1000_pch_lpt) {
 		ew32(IMS, IMS_ENABLE_MASK | E1000_IMS_ECCER);
 	} else {
-- 
2.15.1

             reply	other threads:[~2018-01-31  7:26 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-31  7:26 Benjamin Poirier [this message]
2018-04-01 21:29 ` [PATCH net] e1000e: Remove Other from EIAC Jan Kiszka

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180131072627.18305-1-bpoirier@suse.com \
    --to=bpoirier@suse.com \
    --cc=intel-wired-lan@lists.osuosl.org \
    --cc=jeffrey.t.kirsher@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox