[PATCH net 0/2] r8152: fix rx issues

[PATCH net 0/2] r8152: fix rx issues

[Hayes Wang]

The two patched are used to fix rx issues.

Hayes Wang (2):
  r8152: fix wrong checksum status for received IPv4 packets
  r8152: set rx mode early when linking on

 drivers/net/usb/r8152.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

-- 
2.13.6

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH net 1/2] r8152: fix wrong checksum status for received IPv4 packets

[Hayes Wang]

The device could only check the checksum of TCP and UDP packets. Therefore,
for the IPv4 packets excluding TCP and UDP, the check of checksum is necessary,
even though the IP checksum is correct.

Take ICMP for example, The IP checksum may be correct, but the ICMP checksum
may be wrong.

Signed-off-by: Hayes Wang <hayeswang-Rasf1IRRPZFBDgjK7y7TUQ@public.gmane.org>
---
 drivers/net/usb/r8152.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 0657203ffb91..756de9ea8d2e 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -1848,11 +1848,9 @@ static u8 r8152_rx_csum(struct r8152 *tp, struct rx_desc *rx_desc)
 	if (opts2 & RD_IPV4_CS) {
 		if (opts3 & IPF)
 			checksum = CHECKSUM_NONE;
-		else if ((opts2 & RD_UDP_CS) && (opts3 & UDPF))
-			checksum = CHECKSUM_NONE;
-		else if ((opts2 & RD_TCP_CS) && (opts3 & TCPF))
-			checksum = CHECKSUM_NONE;
-		else
+		else if ((opts2 & RD_UDP_CS) && !(opts3 & UDPF))
+			checksum = CHECKSUM_UNNECESSARY;
+		else if ((opts2 & RD_TCP_CS) && !(opts3 & TCPF))
 			checksum = CHECKSUM_UNNECESSARY;
 	} else if (opts2 & RD_IPV6_CS) {
 		if ((opts2 & RD_UDP_CS) && !(opts3 & UDPF))
-- 
2.13.6

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH net 0/2] r8152: fix rx issues

[David Miller]

From: Hayes Wang <hayeswang-Rasf1IRRPZFBDgjK7y7TUQ@public.gmane.org>
Date: Fri, 2 Feb 2018 16:43:34 +0800

> The two patched are used to fix rx issues.

Series applied.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH net 2/2] r8152: set rx mode early when linking on

[Hayes Wang]

Set rx mode before calling netif_wake_queue() when linking on to avoid
the device missing the receiving packets.

The transmission may start after calling netif_wake_queue(), and the
packets of resopnse may reach before calling rtl8152_set_rx_mode()
which let the device could receive packets. Then, the packets of
response would be missed.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
---
 drivers/net/usb/r8152.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 756de9ea8d2e..958b2e8b90f6 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -3795,11 +3795,12 @@ static void set_carrier(struct r8152 *tp)
 	if (speed & LINK_STATUS) {
 		if (!netif_carrier_ok(netdev)) {
 			tp->rtl_ops.enable(tp);
-			set_bit(RTL8152_SET_RX_MODE, &tp->flags);
 			netif_stop_queue(netdev);
 			napi_disable(napi);
 			netif_carrier_on(netdev);
 			rtl_start_rx(tp);
+			clear_bit(RTL8152_SET_RX_MODE, &tp->flags);
+			_rtl8152_set_rx_mode(netdev);
 			napi_enable(&tp->napi);
 			netif_wake_queue(netdev);
 			netif_info(tp, link, netdev, "carrier on\n");
@@ -4259,7 +4260,7 @@ static int rtl8152_post_reset(struct usb_interface *intf)
 		mutex_lock(&tp->control);
 		tp->rtl_ops.enable(tp);
 		rtl_start_rx(tp);
-		rtl8152_set_rx_mode(netdev);
+		_rtl8152_set_rx_mode(netdev);
 		mutex_unlock(&tp->control);
 	}
 
-- 
2.13.6