netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Christian Brauner <christian.brauner@canonical.com>
To: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>,
	netdev@vger.kernel.org, stephen@networkplumber.org,
	w.bumiller@proxmox.com, ebiederm@xmission.com, jbenc@redhat.com,
	nicolas.dichtel@6wind.com, linux-kernel@vger.kernel.org,
	dsahern@gmail.com, davem@davemloft.net
Subject: Re: [PATCH net 1/1 v4] rtnetlink: require unique netns identifier
Date: Wed, 7 Feb 2018 14:36:21 +0100	[thread overview]
Message-ID: <20180207133620.GA3589@gmail.com> (raw)
In-Reply-To: <942f99e9-086d-25dc-e008-8de2c5c721b1@virtuozzo.com>

On Wed, Feb 07, 2018 at 04:20:01PM +0300, Kirill Tkhai wrote:
> 
> 
> On 07.02.2018 15:53, Christian Brauner wrote:
> > Since we've added support for IFLA_IF_NETNSID for RTM_{DEL,GET,SET,NEW}LINK
> > it is possible for userspace to send us requests with three different
> > properties to identify a target network namespace. This affects at least
> > RTM_{NEW,SET}LINK. Each of them could potentially refer to a different
> > network namespace which is confusing. For legacy reasons the kernel will
> > pick the IFLA_NET_NS_PID property first and then look for the
> > IFLA_NET_NS_FD property but there is no reason to extend this type of
> > behavior to network namespace ids. The regression potential is quite
> > minimal since the rtnetlink requests in question either won't allow
> > IFLA_IF_NETNSID requests before 4.16 is out (RTM_{NEW,SET}LINK) or don't
> > support IFLA_NET_NS_{PID,FD} (RTM_{DEL,GET}LINK) in the first place.
> > 
> > Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
> > ---
> > ChangeLog v3->v4:
> > * Based on discussions with Eric and Jiri: disallow passing multiple network
> >   namespace identifying properties for all requests, i.e. always enforce
> >   uniqueness.
> > * disable passing IFLA_NET_NS_{FD,PID} for RTM_{DEL,GET}LINK completely since
> >   they never supported it
> > ChangeLog v2->v3:
> > * Specifying target network namespaces with pids or fds seems racy since the
> >   process might die and the pid get recycled or the process does a setns() in
> >   which case the tests would be invalid. So only check whether multiple
> >   properties are specified and report a helpful error in this case.
> > ChangeLog v1->v2:
> > * return errno when the specified network namespace id is invalid
> > * fill in struct netlink_ext_ack if the network namespace id is invalid
> > * rename rtnl_ensure_unique_netns_attr() to rtnl_ensure_unique_netns() to
> >   indicate that a request without any network namespace identifying attributes
> >   is also considered valid.
> > ChangeLog v0->v1:
> > * report a descriptive error to userspace via struct netlink_ext_ack
> > * do not fail when multiple properties specifiy the same network namespace
> > ---
> >  net/core/rtnetlink.c | 48 ++++++++++++++++++++++++++++++++++++++++++++++++
> >  1 file changed, 48 insertions(+)
> > 
> > diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
> > index 56af8e41abfc..bc290413a49d 100644
> > --- a/net/core/rtnetlink.c
> > +++ b/net/core/rtnetlink.c
> > @@ -1951,6 +1951,38 @@ static struct net *rtnl_link_get_net_capable(const struct sk_buff *skb,
> >  	return net;
> >  }
> >  
> > +/* Verify that rtnetlink requests do not pass additional properties
> > + * potentially referring to different network namespaces.
> > + */
> > +static int rtnl_ensure_unique_netns(struct nlattr *tb[],
> > +				    struct netlink_ext_ack *extack,
> > +				    bool netns_id_only)
> > +{
> > +
> > +	if (netns_id_only) {
> > +		if (!tb[IFLA_NET_NS_PID] && !tb[IFLA_NET_NS_FD])
> > +			return 0;
> > +
> > +		NL_SET_ERR_MSG(extack, "specified netns attribute not supported");
> > +		return -EOPNOTSUPP;
> > +	}
> > +
> > +	if (tb[IFLA_IF_NETNSID] && (tb[IFLA_NET_NS_PID] || tb[IFLA_NET_NS_FD]))
> > +		goto invalid_attr;
> > +
> > +	if (tb[IFLA_NET_NS_PID] && (tb[IFLA_IF_NETNSID] || tb[IFLA_NET_NS_FD]))
> > +		goto invalid_attr;
> > +
> > +	if (tb[IFLA_NET_NS_FD] && (tb[IFLA_IF_NETNSID] || tb[IFLA_NET_NS_PID]))
> > +		goto invalid_attr;
> 
> Can't we write these 3 above branches more compact? Something like this:
> 
> 	if (!!tb[IFLA_NET_NS_FD] + !!tb[IFLA_IF_NETNSID] + !!tb[IFLA_NET_NS_PID] <= 1)
> 		return 0;

I always prefer for conditions to be separate and readable even if it
means additional code. But if others feel that there's value in avoiding
two additional conditions I'm happy to adapt the patch.

> 
> Also, do we really need two different error values and error messages?

Before I added support for netns ids for additional requests Jiri made
it so that all request that specified properties that they did not
support returned ENOTSUPP instead of EINVAL. This just keeps things
consistent. Users would now suddenly receive EINVAL. That's potentially
confusing.
As for the case of passing multiple netns identifying properties into
the same request EINVAL seems the perfect candidate and the error
message seems instructive to userspace programs.

Thanks!
Christian

  reply	other threads:[~2018-02-07 13:36 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-02-07 12:53 [PATCH net 0/1 v4] rtnetlink: require unique netns identifier Christian Brauner
2018-02-07 12:53 ` [PATCH net 1/1 " Christian Brauner
2018-02-07 13:20   ` Kirill Tkhai
2018-02-07 13:36     ` Christian Brauner [this message]
2018-02-07 13:53       ` Jiri Benc
2018-02-08 19:33   ` David Miller
2018-02-08 22:55     ` Christian Brauner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180207133620.GA3589@gmail.com \
    --to=christian.brauner@canonical.com \
    --cc=christian.brauner@ubuntu.com \
    --cc=davem@davemloft.net \
    --cc=dsahern@gmail.com \
    --cc=ebiederm@xmission.com \
    --cc=jbenc@redhat.com \
    --cc=ktkhai@virtuozzo.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=nicolas.dichtel@6wind.com \
    --cc=stephen@networkplumber.org \
    --cc=w.bumiller@proxmox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).