netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: David Ahern <dsahern@gmail.com>
To: netdev@vger.kernel.org
Cc: idosch@idosch.org, tom@herbertland.com, davem@davemloft.net,
	roopa@cumulusnetworks.com, nikolay@cumulusnetworks.com,
	David Ahern <dsahern@gmail.com>
Subject: [PATCH net-next 2/7] net: Align ip_multipath_l3_keys and ip6_multipath_l3_keys
Date: Wed, 21 Feb 2018 10:49:49 -0800	[thread overview]
Message-ID: <20180221184954.28875-3-dsahern@gmail.com> (raw)
In-Reply-To: <20180221184954.28875-1-dsahern@gmail.com>

Symmetry is good and allows easy comparison that ipv4 and ipv6 are
doing the same thing. To that end, change ip_multipath_l3_keys to
set addresses at the end after the icmp compares, and move the
initialization of ipv6 flow keys to rt6_multipath_hash.

Signed-off-by: David Ahern <dsahern@gmail.com>
---
 net/ipv4/route.c | 20 +++++++++++---------
 net/ipv6/route.c |  4 ++--
 2 files changed, 13 insertions(+), 11 deletions(-)

diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index 0b5c64cf45c6..eaf2cfd7ec43 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -1748,37 +1748,39 @@ static void ip_multipath_l3_keys(const struct sk_buff *skb,
 				 struct flow_keys *hash_keys)
 {
 	const struct iphdr *outer_iph = ip_hdr(skb);
+	const struct iphdr *key_iph = outer_iph;
 	const struct iphdr *inner_iph;
 	const struct icmphdr *icmph;
 	struct iphdr _inner_iph;
 	struct icmphdr _icmph;
 
-	hash_keys->addrs.v4addrs.src = outer_iph->saddr;
-	hash_keys->addrs.v4addrs.dst = outer_iph->daddr;
 	if (likely(outer_iph->protocol != IPPROTO_ICMP))
-		return;
+		goto out;
 
 	if (unlikely((outer_iph->frag_off & htons(IP_OFFSET)) != 0))
-		return;
+		goto out;
 
 	icmph = skb_header_pointer(skb, outer_iph->ihl * 4, sizeof(_icmph),
 				   &_icmph);
 	if (!icmph)
-		return;
+		goto out;
 
 	if (icmph->type != ICMP_DEST_UNREACH &&
 	    icmph->type != ICMP_REDIRECT &&
 	    icmph->type != ICMP_TIME_EXCEEDED &&
 	    icmph->type != ICMP_PARAMETERPROB)
-		return;
+		goto out;
 
 	inner_iph = skb_header_pointer(skb,
 				       outer_iph->ihl * 4 + sizeof(_icmph),
 				       sizeof(_inner_iph), &_inner_iph);
 	if (!inner_iph)
-		return;
-	hash_keys->addrs.v4addrs.src = inner_iph->saddr;
-	hash_keys->addrs.v4addrs.dst = inner_iph->daddr;
+		goto out;
+
+	key_iph = inner_iph;
+out:
+	hash_keys->addrs.v4addrs.src = key_iph->saddr;
+	hash_keys->addrs.v4addrs.dst = key_iph->daddr;
 }
 
 /* if skb is set it will be used and fl4 can be NULL */
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index aa709b644945..ff43add1619d 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -1812,8 +1812,6 @@ static void ip6_multipath_l3_keys(const struct sk_buff *skb,
 
 	key_iph = inner_iph;
 out:
-	memset(keys, 0, sizeof(*keys));
-	keys->control.addr_type = FLOW_DISSECTOR_KEY_IPV6_ADDRS;
 	keys->addrs.v6addrs.src = key_iph->saddr;
 	keys->addrs.v6addrs.dst = key_iph->daddr;
 	keys->tags.flow_label = ip6_flowinfo(key_iph);
@@ -1826,6 +1824,8 @@ u32 rt6_multipath_hash(const struct flowi6 *fl6, const struct sk_buff *skb)
 	struct flow_keys hash_keys;
 
 	if (skb) {
+		memset(&hash_keys, 0, sizeof(hash_keys));
+		hash_keys.control.addr_type = FLOW_DISSECTOR_KEY_IPV6_ADDRS;
 		ip6_multipath_l3_keys(skb, &hash_keys);
 		return flow_hash_from_keys(&hash_keys) >> 1;
 	}
-- 
2.11.0

  parent reply	other threads:[~2018-02-21 18:50 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-02-21 18:49 [PATCH net-next 0/7] net/ipv6: Add support for path selection using hash of 5-tuple David Ahern
2018-02-21 18:49 ` [PATCH net-next 1/7] net/ipv4: Pass net to fib_multipath_hash instead of fib_info David Ahern
2018-02-21 18:49 ` David Ahern [this message]
2018-02-21 18:49 ` [PATCH net-next 3/7] net/ipv6: Make rt6_multipath_hash similar to fib_multipath_hash David Ahern
2018-02-21 18:49 ` [PATCH net-next 4/7] net: Rename NETEVENT_MULTIPATH_HASH_UPDATE David Ahern
2018-02-21 18:49 ` [PATCH net-next 5/7] net/ipv6: Add support for path selection using hash of 5-tuple David Ahern
2018-02-22 10:09   ` Ido Schimmel
2018-02-21 18:49 ` [PATCH net-next 6/7] mlxsw: spectrum_router: Add support for ipv6 hash policy update David Ahern
2018-02-21 20:26   ` Ido Schimmel
2018-02-22 12:54   ` Ido Schimmel
2018-02-23 17:09   ` kbuild test robot
2018-02-21 18:49 ` [PATCH net-next 7/7] net: Remove unused get_hash_from_flow functions David Ahern
2018-02-22 19:27 ` [PATCH net-next 0/7] net/ipv6: Add support for path selection using hash of 5-tuple David Miller
2018-02-22 19:31   ` David Ahern
2018-02-22 19:40     ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180221184954.28875-3-dsahern@gmail.com \
    --to=dsahern@gmail.com \
    --cc=davem@davemloft.net \
    --cc=idosch@idosch.org \
    --cc=netdev@vger.kernel.org \
    --cc=nikolay@cumulusnetworks.com \
    --cc=roopa@cumulusnetworks.com \
    --cc=tom@herbertland.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).