From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <netdev-owner@vger.kernel.org>
Received: from shards.monkeyblade.net ([184.105.139.130]:35308 "EHLO
        shards.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
        with ESMTP id S1751463AbeBWRck (ORCPT
        <rfc822;netdev@vger.kernel.org>); Fri, 23 Feb 2018 12:32:40 -0500
Date: Fri, 23 Feb 2018 12:32:39 -0500 (EST)
Message-Id: <20180223.123239.1596336129753343354.davem@davemloft.net>
To: andrew@lunn.ch
Cc: netdev@vger.kernel.org, vivien.didelot@savoirfairelinux.com,
        gregory.clement@free-electrons.com
Subject: Re: [PATCH 0/2] mv88e6xxx: Poll when no interrupt defined
From: David Miller <davem@davemloft.net>
In-Reply-To: <1519336713-5417-1-git-send-email-andrew@lunn.ch>
References: <1519336713-5417-1-git-send-email-andrew@lunn.ch>
Mime-Version: 1.0
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: netdev-owner@vger.kernel.org
List-ID: <netdev.vger.kernel.org>

From: Andrew Lunn <andrew@lunn.ch>
Date: Thu, 22 Feb 2018 22:58:31 +0100

> Not all boards using the mv88e6xxx switches have the interrupt output
> connected to a GPIO. On these boards phylib has to poll the PHYs,
> rather than use interrupts. Have the driver poll the interrupt status
> register, which is more efficient than having phylib do it. And it
> enables other switch interrupts to be services.
> 
> The Armada 370RD is such a board without a interrupt GPIO. Now that
> interrupts work, wire up the PHYs to make use if them.
> 
> Gregory: Are you O.K. for the second patch to go through netdev?

I'll wait for Gregory's response before applying this series.