[PATCH net-next v3 5/5] net: phy: marvell10g: Utilize gen10g_no_soft_reset()

[Florian Fainelli <f.fainelli@gmail.com>]

We do the same thing as the generic function: nothing, so utilize it.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/phy/marvell10g.c | 11 +----------
 1 file changed, 1 insertion(+), 10 deletions(-)

diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index 8a0bd98fdec7..4f1efa02a930 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -71,15 +71,6 @@ static int mv3310_probe(struct phy_device *phydev)
 	return 0;
 }
 
-/*
- * Resetting the MV88X3310 causes it to become non-responsive.  Avoid
- * setting the reset bit(s).
- */
-static int mv3310_soft_reset(struct phy_device *phydev)
-{
-	return 0;
-}
-
 static int mv3310_config_init(struct phy_device *phydev)
 {
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(supported) = { 0, };
@@ -377,7 +368,7 @@ static struct phy_driver mv3310_drivers[] = {
 				  SUPPORTED_10000baseT_Full |
 				  SUPPORTED_Backplane,
 		.probe		= mv3310_probe,
-		.soft_reset	= mv3310_soft_reset,
+		.soft_reset	= gen10g_no_soft_reset,
 		.config_init	= mv3310_config_init,
 		.config_aneg	= mv3310_config_aneg,
 		.aneg_done	= mv3310_aneg_done,
-- 
2.14.1