From mboxrd@z Thu Jan 1 00:00:00 1970 From: Antoine Tenart Subject: [PATCH net-next 08/10] arm64: dts: marvell: 7040-db: set the 10G interface management to in-band Date: Fri, 16 Mar 2018 11:33:49 +0100 Message-ID: <20180316103351.16616-9-antoine.tenart@bootlin.com> References: <20180316103351.16616-1-antoine.tenart@bootlin.com> Cc: Antoine Tenart , netdev@vger.kernel.org, linux-kernel@vger.kernel.org, thomas.petazzoni@bootlin.com, maxime.chevallier@bootlin.com, miquel.raynal@bootlin.com, nadavh@marvell.com, stefanc@marvell.com, ymarkman@marvell.com, mw@semihalf.com, linux-arm-kernel@lists.infradead.org To: davem@davemloft.net, kishon@ti.com, linux@armlinux.org.uk, gregory.clement@bootlin.com, andrew@lunn.ch, jason@lakedaemon.net, sebastian.hesselbarth@gmail.com Return-path: In-Reply-To: <20180316103351.16616-1-antoine.tenart@bootlin.com> Sender: linux-kernel-owner@vger.kernel.org List-Id: netdev.vger.kernel.org This patch sets the 10G interface (cp0_eth0) management to in-band. This is needed for the PPv2 driver to handle such ports, with its conversion to phylink. Signed-off-by: Antoine Tenart --- arch/arm64/boot/dts/marvell/armada-7040-db.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts index 3ae05eee2c9a..f27af07db381 100644 --- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts @@ -267,6 +267,7 @@ status = "okay"; /* Network PHY */ phy-mode = "10gbase-kr"; + managed = "in-band-status"; /* Generic PHY, providing serdes lanes */ phys = <&cp0_comphy2 0>; }; -- 2.14.3