Re: [V2] brcmfmac: drop Inter-Access Point Protocol packets by default

[Kalle Valo <kvalo-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>]

Rafał Miłecki wrote:

> From: Rafał Miłecki <rafal-g1n6cQUeyibVItvQsEIGlw@public.gmane.org>
> 
> Testing brcmfmac with more recent firmwares resulted in AP interfaces
> not working in some specific setups. Debugging resulted in discovering
> support for IAPP in Broadcom's firmwares.
> 
> Older firmwares were only generating 802.11f frames. Newer ones like:
> 1) 10.10 (TOB) (r663589)
> 2) 10.10.122.20 (r683106)
> for 4366b1 and 4366c0 respectively seem to also /respect/ 802.11f frames
> in the Tx path by performing a STA disassociation.
> 
> This obsoleted standard and its implementation is something that:
> 1) Most people don't need / want to use
> 2) Can allow local DoS attacks
> 3) Breaks AP interfaces in some specific bridge setups
> 
> To solve issues it can cause this commit modifies brcmfmac to drop IAPP
> packets. If affects:
> 1) Rx path: driver won't be sending these unwanted packets up.
> 2) Tx path: driver will reject packets that would trigger STA
>    disassociation perfromed by a firmware (possible local DoS attack).
> 
> It appears there are some Broadcom's clients/users who care about this
> feature despite the drawbacks. They can switch it on using a new module
> param.
> 
> This change results in only two more comparisons (check for module param
> and check for Ethernet packet length) for 99.9% of packets. Its overhead
> should be very minimal.
> 
> Signed-off-by: Rafał Miłecki <rafal-g1n6cQUeyibVItvQsEIGlw@public.gmane.org>
> Acked-by: Arend van Spriel <arend.vanspriel-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>

Patch applied to wireless-drivers.git, thanks.

125905517028 brcmfmac: drop Inter-Access Point Protocol packets by default

-- 
https://patchwork.kernel.org/patch/10283971/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches