From: Saeed Mahameed <saeedm@mellanox.com>
To: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org, Inbar Karmy <inbark@mellanox.com>,
Michal Kubecek <mkubecek@suse.cz>, Andrew Lunn <andrew@lunn.ch>,
Saeed Mahameed <saeedm@mellanox.com>
Subject: [net-next V2 02/15] ethtool: Add support for configuring PFC stall prevention in ethtool
Date: Mon, 26 Mar 2018 13:55:50 -0700 [thread overview]
Message-ID: <20180326205603.9450-3-saeedm@mellanox.com> (raw)
In-Reply-To: <20180326205603.9450-1-saeedm@mellanox.com>
From: Inbar Karmy <inbark@mellanox.com>
In the event where the device unexpectedly becomes unresponsive
for a long period of time, flow control mechanism may propagate
pause frames which will cause congestion spreading to the entire
network.
To prevent this scenario, when the device is stalled for a period
longer than a pre-configured timeout, flow control mechanisms are
automatically disabled.
This patch adds support for the ETHTOOL_PFC_STALL_PREVENTION
as a tunable.
This API provides support for configuring flow control storm prevention
timeout (msec).
Signed-off-by: Inbar Karmy <inbark@mellanox.com>
Cc: Michal Kubecek <mkubecek@suse.cz>
Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
include/uapi/linux/ethtool.h | 4 ++++
net/core/ethtool.c | 6 ++++++
2 files changed, 10 insertions(+)
diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h
index 20da156aaf64..4ca65b56084f 100644
--- a/include/uapi/linux/ethtool.h
+++ b/include/uapi/linux/ethtool.h
@@ -217,10 +217,14 @@ struct ethtool_value {
__u32 data;
};
+#define PFC_STORM_PREVENTION_AUTO 0xffff
+#define PFC_STORM_PREVENTION_DISABLE 0
+
enum tunable_id {
ETHTOOL_ID_UNSPEC,
ETHTOOL_RX_COPYBREAK,
ETHTOOL_TX_COPYBREAK,
+ ETHTOOL_PFC_PREVENTION_TOUT, /* timeout in msecs */
/*
* Add your fresh new tubale attribute above and remember to update
* tunable_strings[] in net/core/ethtool.c
diff --git a/net/core/ethtool.c b/net/core/ethtool.c
index 157cd9efa4be..bb6e498c6e3d 100644
--- a/net/core/ethtool.c
+++ b/net/core/ethtool.c
@@ -121,6 +121,7 @@ tunable_strings[__ETHTOOL_TUNABLE_COUNT][ETH_GSTRING_LEN] = {
[ETHTOOL_ID_UNSPEC] = "Unspec",
[ETHTOOL_RX_COPYBREAK] = "rx-copybreak",
[ETHTOOL_TX_COPYBREAK] = "tx-copybreak",
+ [ETHTOOL_PFC_PREVENTION_TOUT] = "pfc-prevention-tout",
};
static const char
@@ -2311,6 +2312,11 @@ static int ethtool_tunable_valid(const struct ethtool_tunable *tuna)
tuna->type_id != ETHTOOL_TUNABLE_U32)
return -EINVAL;
break;
+ case ETHTOOL_PFC_PREVENTION_TOUT:
+ if (tuna->len != sizeof(u16) ||
+ tuna->type_id != ETHTOOL_TUNABLE_U16)
+ return -EINVAL;
+ break;
default:
return -EINVAL;
}
--
2.14.3
next prev parent reply other threads:[~2018-03-26 20:56 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-26 20:55 [pull request][net-next V2 00/15] Mellanox, mlx5 misc updates 2018-03-22 Saeed Mahameed
2018-03-26 20:55 ` [net-next V2 01/15] net/mlx5e: Expose PFC stall prevention counters Saeed Mahameed
2018-03-26 20:55 ` Saeed Mahameed [this message]
2018-03-26 20:55 ` [net-next V2 03/15] net/mlx5e: PFC stall prevention support Saeed Mahameed
2018-03-26 20:55 ` [net-next V2 04/15] net/mlx5: Add support for QUERY_VNIC_ENV command Saeed Mahameed
2018-03-26 20:55 ` [net-next V2 05/15] net/mlx5e: Add vnic steering drop statistics Saeed Mahameed
2018-03-26 20:55 ` [net-next V2 06/15] net/mlx5: Add packet dropped while vport down statistics Saeed Mahameed
2018-03-26 20:55 ` [net-next V2 07/15] net/mlx5e: Add interface down dropped packets statistics Saeed Mahameed
2018-03-26 20:55 ` [net-next V2 08/15] net/mlx5: E-Switch, Use same source for offloaded actions check Saeed Mahameed
2018-03-26 20:55 ` [net-next V2 09/15] net/mlx5: Add core support for vlan push/pop steering action Saeed Mahameed
2018-03-26 20:55 ` [net-next V2 10/15] net/mlx5e: Offload tc vlan push/pop using HW action Saeed Mahameed
2018-03-26 20:55 ` [net-next V2 11/15] net/mlx5: Protect from command bit overflow Saeed Mahameed
2018-03-26 20:56 ` [net-next V2 12/15] net/mlx5e: Remove redundant check in get ethtool stats Saeed Mahameed
2018-03-26 20:56 ` [net-next V2 13/15] net/mlx5e: Make choose LRO timeout function static Saeed Mahameed
2018-03-26 20:56 ` [net-next V2 14/15] net/mlx5e: Add a helper macro in set features ndo Saeed Mahameed
2018-03-26 20:56 ` [net-next V2 15/15] net/mlx5e: Add VLAN offload features to hw_enc_features Saeed Mahameed
2018-03-27 15:05 ` [pull request][net-next V2 00/15] Mellanox, mlx5 misc updates 2018-03-22 David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180326205603.9450-3-saeedm@mellanox.com \
--to=saeedm@mellanox.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=inbark@mellanox.com \
--cc=mkubecek@suse.cz \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox