* [PATCH] wcn36xx: Disable 5GHz for wcn3610
@ 2018-03-29 6:20 Ramon Fried
2018-03-29 6:58 ` Rafał Miłecki
0 siblings, 1 reply; 3+ messages in thread
From: Ramon Fried @ 2018-03-29 6:20 UTC (permalink / raw)
To: kvalo, loic.poulain
Cc: wcn36xx, linux-wireless, netdev, linux-kernel, Ramon Fried
wcn3610 can only operate on 2.4GHz band due to RF limitation.
If wcn36xx digital block is associated with an external IRIS
RF module, retrieve the id and disable 5GHz band in case of
wcn3610 id.
Signed-off-by: Ramon Fried <rfried@codeaurora.org>
---
drivers/net/wireless/ath/wcn36xx/main.c | 4 +++-
drivers/net/wireless/ath/wcn36xx/wcn36xx.h | 1 +
2 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
index ab5be6d2c691..833531a68c95 100644
--- a/drivers/net/wireless/ath/wcn36xx/main.c
+++ b/drivers/net/wireless/ath/wcn36xx/main.c
@@ -1146,7 +1146,7 @@ static int wcn36xx_init_ieee80211(struct wcn36xx *wcn)
BIT(NL80211_IFTYPE_MESH_POINT);
wcn->hw->wiphy->bands[NL80211_BAND_2GHZ] = &wcn_band_2ghz;
- if (wcn->rf_id != RF_IRIS_WCN3620)
+ if (wcn->rf_id != RF_IRIS_WCN3610 && wcn->rf_id != RF_IRIS_WCN3620)
wcn->hw->wiphy->bands[NL80211_BAND_5GHZ] = &wcn_band_5ghz;
wcn->hw->wiphy->max_scan_ssids = WCN36XX_MAX_SCAN_SSIDS;
@@ -1248,6 +1248,8 @@ static int wcn36xx_platform_get_resources(struct wcn36xx *wcn,
if (iris_node) {
if (of_device_is_compatible(iris_node, "qcom,wcn3620"))
wcn->rf_id = RF_IRIS_WCN3620;
+ else if (of_device_is_compatible(iris_node, "qcom,wcn3610"))
+ wcn->rf_id = RF_IRIS_WCN3620;
of_node_put(iris_node);
}
diff --git a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
index 81017e6703b4..bc4d1a10d90e 100644
--- a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
+++ b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
@@ -95,6 +95,7 @@ enum wcn36xx_ampdu_state {
#define WCN36XX_MAX_POWER(__wcn) (__wcn->hw->conf.chandef.chan->max_power)
#define RF_UNKNOWN 0x0000
+#define RF_IRIS_WCN3610 0x3610
#define RF_IRIS_WCN3620 0x3620
static inline void buff_to_be(u32 *buf, size_t len)
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] wcn36xx: Disable 5GHz for wcn3610
2018-03-29 6:20 [PATCH] wcn36xx: Disable 5GHz for wcn3610 Ramon Fried
@ 2018-03-29 6:58 ` Rafał Miłecki
2018-03-29 7:00 ` Ramon Fried
0 siblings, 1 reply; 3+ messages in thread
From: Rafał Miłecki @ 2018-03-29 6:58 UTC (permalink / raw)
To: Ramon Fried, kvalo, loic.poulain
Cc: wcn36xx, linux-wireless, netdev, linux-kernel
On 03/29/2018 08:20 AM, Ramon Fried wrote:
> wcn3610 can only operate on 2.4GHz band due to RF limitation.
> If wcn36xx digital block is associated with an external IRIS
> RF module, retrieve the id and disable 5GHz band in case of
> wcn3610 id.
>
> Signed-off-by: Ramon Fried <rfried@codeaurora.org>
> ---
> drivers/net/wireless/ath/wcn36xx/main.c | 4 +++-
> drivers/net/wireless/ath/wcn36xx/wcn36xx.h | 1 +
> 2 files changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
> index ab5be6d2c691..833531a68c95 100644
> --- a/drivers/net/wireless/ath/wcn36xx/main.c
> +++ b/drivers/net/wireless/ath/wcn36xx/main.c
> @@ -1146,7 +1146,7 @@ static int wcn36xx_init_ieee80211(struct wcn36xx *wcn)
> BIT(NL80211_IFTYPE_MESH_POINT);
>
> wcn->hw->wiphy->bands[NL80211_BAND_2GHZ] = &wcn_band_2ghz;
> - if (wcn->rf_id != RF_IRIS_WCN3620)
> + if (wcn->rf_id != RF_IRIS_WCN3610 && wcn->rf_id != RF_IRIS_WCN3620)
> wcn->hw->wiphy->bands[NL80211_BAND_5GHZ] = &wcn_band_5ghz;
>
> wcn->hw->wiphy->max_scan_ssids = WCN36XX_MAX_SCAN_SSIDS;
> @@ -1248,6 +1248,8 @@ static int wcn36xx_platform_get_resources(struct wcn36xx *wcn,
> if (iris_node) {
> if (of_device_is_compatible(iris_node, "qcom,wcn3620"))
> wcn->rf_id = RF_IRIS_WCN3620;
> + else if (of_device_is_compatible(iris_node, "qcom,wcn3610"))
> + wcn->rf_id = RF_IRIS_WCN3620;
RF_IRIS_WCN3610 ?
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] wcn36xx: Disable 5GHz for wcn3610
2018-03-29 6:58 ` Rafał Miłecki
@ 2018-03-29 7:00 ` Ramon Fried
0 siblings, 0 replies; 3+ messages in thread
From: Ramon Fried @ 2018-03-29 7:00 UTC (permalink / raw)
To: Rafał Miłecki, kvalo, loic.poulain
Cc: wcn36xx, linux-wireless, linux-kernel, netdev
On 3/29/2018 9:58 AM, Rafał Miłecki wrote:
> On 03/29/2018 08:20 AM, Ramon Fried wrote:
>> wcn3610 can only operate on 2.4GHz band due to RF limitation.
>> If wcn36xx digital block is associated with an external IRIS
>> RF module, retrieve the id and disable 5GHz band in case of
>> wcn3610 id.
>>
>> Signed-off-by: Ramon Fried <rfried@codeaurora.org>
>> ---
>> drivers/net/wireless/ath/wcn36xx/main.c | 4 +++-
>> drivers/net/wireless/ath/wcn36xx/wcn36xx.h | 1 +
>> 2 files changed, 4 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
>> index ab5be6d2c691..833531a68c95 100644
>> --- a/drivers/net/wireless/ath/wcn36xx/main.c
>> +++ b/drivers/net/wireless/ath/wcn36xx/main.c
>> @@ -1146,7 +1146,7 @@ static int wcn36xx_init_ieee80211(struct wcn36xx *wcn)
>> BIT(NL80211_IFTYPE_MESH_POINT);
>>
>> wcn->hw->wiphy->bands[NL80211_BAND_2GHZ] = &wcn_band_2ghz;
>> - if (wcn->rf_id != RF_IRIS_WCN3620)
>> + if (wcn->rf_id != RF_IRIS_WCN3610 && wcn->rf_id != RF_IRIS_WCN3620)
>> wcn->hw->wiphy->bands[NL80211_BAND_5GHZ] = &wcn_band_5ghz;
>>
>> wcn->hw->wiphy->max_scan_ssids = WCN36XX_MAX_SCAN_SSIDS;
>> @@ -1248,6 +1248,8 @@ static int wcn36xx_platform_get_resources(struct wcn36xx *wcn,
>> if (iris_node) {
>> if (of_device_is_compatible(iris_node, "qcom,wcn3620"))
>> wcn->rf_id = RF_IRIS_WCN3620;
>> + else if (of_device_is_compatible(iris_node, "qcom,wcn3610"))
>> + wcn->rf_id = RF_IRIS_WCN3620;
>
> RF_IRIS_WCN3610 ?
You're correct. I also noticed just now.
Sent v2. Thanks.
>
> _______________________________________________
> wcn36xx mailing list
> wcn36xx@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/wcn36xx
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2018-03-29 7:00 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-03-29 6:20 [PATCH] wcn36xx: Disable 5GHz for wcn3610 Ramon Fried
2018-03-29 6:58 ` Rafał Miłecki
2018-03-29 7:00 ` Ramon Fried
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).