From: Alexander Duyck <alexander.duyck@gmail.com>
To: netdev@vger.kernel.org, willemb@google.com, davem@davemloft.net
Subject: [net-next PATCH v2 3/8] udp: Do not pass MSS as parameter to GSO segmentation
Date: Fri, 04 May 2018 11:29:52 -0700 [thread overview]
Message-ID: <20180504182941.5194.49667.stgit@localhost.localdomain> (raw)
In-Reply-To: <20180504182537.5194.72775.stgit@localhost.localdomain>
From: Alexander Duyck <alexander.h.duyck@intel.com>
There is no point in passing MSS as a parameter for for the GSO
segmentation call as it is already available via the shared info for the
skb itself.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
---
v2: New break-out patch based on one patch from earlier series
include/net/udp.h | 2 +-
net/ipv4/udp_offload.c | 6 ++++--
net/ipv6/udp_offload.c | 2 +-
3 files changed, 6 insertions(+), 4 deletions(-)
diff --git a/include/net/udp.h b/include/net/udp.h
index 05990746810e..8bd83b044ecd 100644
--- a/include/net/udp.h
+++ b/include/net/udp.h
@@ -176,7 +176,7 @@ struct sk_buff **udp_gro_receive(struct sk_buff **head, struct sk_buff *skb,
struct sk_buff *__udp_gso_segment(struct sk_buff *gso_skb,
netdev_features_t features,
- unsigned int mss, __sum16 check);
+ __sum16 check);
static inline struct udphdr *udp_gro_udphdr(struct sk_buff *skb)
{
diff --git a/net/ipv4/udp_offload.c b/net/ipv4/udp_offload.c
index 8303fff42940..f21b63adcbbc 100644
--- a/net/ipv4/udp_offload.c
+++ b/net/ipv4/udp_offload.c
@@ -189,14 +189,16 @@ struct sk_buff *skb_udp_tunnel_segment(struct sk_buff *skb,
struct sk_buff *__udp_gso_segment(struct sk_buff *gso_skb,
netdev_features_t features,
- unsigned int mss, __sum16 check)
+ __sum16 check)
{
struct sk_buff *seg, *segs = ERR_PTR(-EINVAL);
struct sock *sk = gso_skb->sk;
unsigned int sum_truesize = 0;
unsigned int hdrlen;
struct udphdr *uh;
+ unsigned int mss;
+ mss = skb_shinfo(gso_skb)->gso_size;
if (gso_skb->len <= sizeof(*uh) + mss)
goto out;
@@ -247,7 +249,7 @@ static struct sk_buff *__udp4_gso_segment(struct sk_buff *gso_skb,
if (!can_checksum_protocol(features, htons(ETH_P_IP)))
return ERR_PTR(-EIO);
- return __udp_gso_segment(gso_skb, features, mss,
+ return __udp_gso_segment(gso_skb, features,
udp_v4_check(sizeof(struct udphdr) + mss,
iph->saddr, iph->daddr, 0));
}
diff --git a/net/ipv6/udp_offload.c b/net/ipv6/udp_offload.c
index f7b85b1e6b3e..dea03ec09715 100644
--- a/net/ipv6/udp_offload.c
+++ b/net/ipv6/udp_offload.c
@@ -26,7 +26,7 @@ static struct sk_buff *__udp6_gso_segment(struct sk_buff *gso_skb,
if (!can_checksum_protocol(features, htons(ETH_P_IPV6)))
return ERR_PTR(-EIO);
- return __udp_gso_segment(gso_skb, features, mss,
+ return __udp_gso_segment(gso_skb, features,
udp_v6_check(sizeof(struct udphdr) + mss,
&ip6h->saddr, &ip6h->daddr, 0));
}
next prev parent reply other threads:[~2018-05-04 18:29 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-04 18:28 [net-next PATCH v2 0/8] UDP GSO Segmentation clean-ups Alexander Duyck
2018-05-04 18:28 ` [net-next PATCH v2 1/8] udp: Record gso_segs when supporting UDP segmentation offload Alexander Duyck
2018-05-05 8:23 ` Willem de Bruijn
2018-05-04 18:29 ` [net-next PATCH v2 2/8] udp: Verify that pulling UDP header in GSO segmentation doesn't fail Alexander Duyck
2018-05-04 20:07 ` Eric Dumazet
2018-05-05 8:12 ` Willem de Bruijn
2018-05-05 17:10 ` Alexander Duyck
2018-05-04 18:29 ` Alexander Duyck [this message]
2018-05-04 20:08 ` [net-next PATCH v2 3/8] udp: Do not pass MSS as parameter to GSO segmentation Eric Dumazet
2018-05-05 8:13 ` Willem de Bruijn
2018-05-04 18:30 ` [net-next PATCH v2 4/8] udp: Do not pass checksum as a " Alexander Duyck
2018-05-04 20:19 ` Eric Dumazet
2018-05-04 22:28 ` Alexander Duyck
2018-05-05 10:01 ` Willem de Bruijn
2018-05-05 17:39 ` Alexander Duyck
2018-05-06 17:17 ` Willem de Bruijn
2018-05-06 22:29 ` Alexander Duyck
2018-05-04 18:30 ` [net-next PATCH v2 5/8] udp: Partially unroll handling of first segment and last segment Alexander Duyck
2018-05-05 8:37 ` Willem de Bruijn
2018-05-05 17:13 ` Alexander Duyck
2018-05-04 18:31 ` [net-next PATCH v2 6/8] udp: Add support for software checksum and GSO_PARTIAL with GSO offload Alexander Duyck
2018-05-06 21:50 ` Willem de Bruijn
2018-05-06 22:13 ` Alexander Duyck
2018-05-04 18:31 ` [net-next PATCH v2 7/8] udp: Do not copy destructor if one is not present Alexander Duyck
2018-05-05 8:45 ` Willem de Bruijn
2018-05-04 18:31 ` [net-next PATCH v2 8/8] net: Add NETIF_F_GSO_UDP_L4 to list of GSO offloads with fallback Alexander Duyck
2018-05-05 10:06 ` [net-next PATCH v2 0/8] UDP GSO Segmentation clean-ups Willem de Bruijn
2018-05-07 18:02 ` Alexander Duyck
2018-05-09 15:39 ` Willem de Bruijn
2018-05-09 15:58 ` Alexander Duyck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180504182941.5194.49667.stgit@localhost.localdomain \
--to=alexander.duyck@gmail.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
--cc=willemb@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).