From mboxrd@z Thu Jan  1 00:00:00 1970
From: David Miller <davem@davemloft.net>
Subject: Re: [PATCH v3] net: phy: DP83TC811: Introduce support for the
 DP83TC811 phy
Date: Fri, 11 May 2018 16:36:28 -0400 (EDT)
Message-ID: <20180511.163628.791935735291449158.davem@davemloft.net>
References: <20180511180819.5036-1-dmurphy@ti.com>
Mime-Version: 1.0
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Cc: andrew@lunn.ch, f.fainelli@gmail.com, netdev@vger.kernel.org,
        linux-kernel@vger.kernel.org
To: dmurphy@ti.com
Return-path: <linux-kernel-owner@vger.kernel.org>
In-Reply-To: <20180511180819.5036-1-dmurphy@ti.com>
Sender: linux-kernel-owner@vger.kernel.org
List-Id: netdev.vger.kernel.org

From: Dan Murphy <dmurphy@ti.com>
Date: Fri, 11 May 2018 13:08:19 -0500

> Add support for the DP83811 phy.
> 
> The DP83811 supports both rgmii and sgmii interfaces.
> There are 2 part numbers for this the DP83TC811R does not
> reliably support the SGMII interface but the DP83TC811S will.
> 
> There is not a way to differentiate these parts from the
> hardware or register set.  So this is controlled via the DT
> to indicate which phy mode is required.  Or the part can be
> strapped to a certain interface.
> 
> Data sheet can be found here:
> http://www.ti.com/product/DP83TC811S-Q1/description
> http://www.ti.com/product/DP83TC811R-Q1/description
> 
> Signed-off-by: Dan Murphy <dmurphy@ti.com>

Applied to net-next, thank you.