From: Stephen Hemminger <stephen@networkplumber.org>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, Vitaly Kuznetsov <vkuznets@redhat.com>
Subject: [PATCH net-stable 07/24] hv_netvsc: preserve hw_features on mtu/channels/ringparam changes
Date: Mon, 14 May 2018 15:32:06 -0700 [thread overview]
Message-ID: <20180514223223.25433-8-sthemmin@microsoft.com> (raw)
In-Reply-To: <20180514223223.25433-1-sthemmin@microsoft.com>
From: Vitaly Kuznetsov <vkuznets@redhat.com>
commit aefd80e874e98a864915df5b7d90824a4340b450 upstream.
rndis_filter_device_add() is called both from netvsc_probe() when we
initially create the device and from set channels/mtu/ringparam
routines where we basically remove the device and add it back.
hw_features is reset in rndis_filter_device_add() and filled with
host data. However, we lose all additional flags which are set outside
of the driver, e.g. register_netdevice() adds NETIF_F_SOFT_FEATURES and
many others.
Unfortunately, calls to rndis_{query_hwcaps(), _set_offload_params()}
calls cannot be avoided on every RNDIS reset: host expects us to set
required features explicitly. Moreover, in theory hardware capabilities
can change and we need to reflect the change in hw_features.
Reset net->hw_features bits according to host data in
rndis_netdev_set_hwcaps(), clear corresponding feature bits
from net->features in case some features went missing (will never happen
in real life I guess but let's be consistent).
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/hyperv/hyperv_net.h | 4 +
drivers/net/hyperv/netvsc_drv.c | 2 +-
drivers/net/hyperv/rndis_filter.c | 136 +++++++++++++++++-------------
3 files changed, 83 insertions(+), 59 deletions(-)
diff --git a/drivers/net/hyperv/hyperv_net.h b/drivers/net/hyperv/hyperv_net.h
index 94de7ca1e52e..a3f628c3c9ed 100644
--- a/drivers/net/hyperv/hyperv_net.h
+++ b/drivers/net/hyperv/hyperv_net.h
@@ -659,6 +659,10 @@ struct nvsp_message {
#define NETVSC_RECEIVE_BUFFER_ID 0xcafe
#define NETVSC_SEND_BUFFER_ID 0
+#define NETVSC_SUPPORTED_HW_FEATURES (NETIF_F_RXCSUM | NETIF_F_IP_CSUM | \
+ NETIF_F_TSO | NETIF_F_IPV6_CSUM | \
+ NETIF_F_TSO6)
+
#define VRSS_SEND_TAB_SIZE 16 /* must be power of 2 */
#define VRSS_CHANNEL_MAX 64
#define VRSS_CHANNEL_DEFAULT 8
diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c
index f5d299b82bac..cfaf433b0cda 100644
--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -1955,7 +1955,7 @@ static int netvsc_probe(struct hv_device *dev,
memcpy(net->dev_addr, device_info.mac_adr, ETH_ALEN);
- /* hw_features computed in rndis_filter_device_add */
+ /* hw_features computed in rndis_netdev_set_hwcaps() */
net->features = net->hw_features |
NETIF_F_HIGHDMA | NETIF_F_SG |
NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX;
diff --git a/drivers/net/hyperv/rndis_filter.c b/drivers/net/hyperv/rndis_filter.c
index 0648eebda829..be57639bee29 100644
--- a/drivers/net/hyperv/rndis_filter.c
+++ b/drivers/net/hyperv/rndis_filter.c
@@ -1131,69 +1131,20 @@ void rndis_set_subchannel(struct work_struct *w)
rtnl_unlock();
}
-struct netvsc_device *rndis_filter_device_add(struct hv_device *dev,
- struct netvsc_device_info *device_info)
+static int rndis_netdev_set_hwcaps(struct rndis_device *rndis_device,
+ struct netvsc_device *nvdev)
{
- struct net_device *net = hv_get_drvdata(dev);
+ struct net_device *net = rndis_device->ndev;
struct net_device_context *net_device_ctx = netdev_priv(net);
- struct netvsc_device *net_device;
- struct rndis_device *rndis_device;
struct ndis_offload hwcaps;
struct ndis_offload_params offloads;
- struct ndis_recv_scale_cap rsscap;
- u32 rsscap_size = sizeof(struct ndis_recv_scale_cap);
unsigned int gso_max_size = GSO_MAX_SIZE;
- u32 mtu, size;
- const struct cpumask *node_cpu_mask;
- u32 num_possible_rss_qs;
- int i, ret;
-
- rndis_device = get_rndis_device();
- if (!rndis_device)
- return ERR_PTR(-ENODEV);
-
- /*
- * Let the inner driver handle this first to create the netvsc channel
- * NOTE! Once the channel is created, we may get a receive callback
- * (RndisFilterOnReceive()) before this call is completed
- */
- net_device = netvsc_device_add(dev, device_info);
- if (IS_ERR(net_device)) {
- kfree(rndis_device);
- return net_device;
- }
-
- /* Initialize the rndis device */
- net_device->max_chn = 1;
- net_device->num_chn = 1;
-
- net_device->extension = rndis_device;
- rndis_device->ndev = net;
-
- /* Send the rndis initialization message */
- ret = rndis_filter_init_device(rndis_device, net_device);
- if (ret != 0)
- goto err_dev_remv;
-
- /* Get the MTU from the host */
- size = sizeof(u32);
- ret = rndis_filter_query_device(rndis_device, net_device,
- RNDIS_OID_GEN_MAXIMUM_FRAME_SIZE,
- &mtu, &size);
- if (ret == 0 && size == sizeof(u32) && mtu < net->mtu)
- net->mtu = mtu;
-
- /* Get the mac address */
- ret = rndis_filter_query_device_mac(rndis_device, net_device);
- if (ret != 0)
- goto err_dev_remv;
-
- memcpy(device_info->mac_adr, rndis_device->hw_mac_adr, ETH_ALEN);
+ int ret;
/* Find HW offload capabilities */
- ret = rndis_query_hwcaps(rndis_device, net_device, &hwcaps);
+ ret = rndis_query_hwcaps(rndis_device, nvdev, &hwcaps);
if (ret != 0)
- goto err_dev_remv;
+ return ret;
/* A value of zero means "no change"; now turn on what we want. */
memset(&offloads, 0, sizeof(struct ndis_offload_params));
@@ -1201,8 +1152,12 @@ struct netvsc_device *rndis_filter_device_add(struct hv_device *dev,
/* Linux does not care about IP checksum, always does in kernel */
offloads.ip_v4_csum = NDIS_OFFLOAD_PARAMETERS_TX_RX_DISABLED;
+ /* Reset previously set hw_features flags */
+ net->hw_features &= ~NETVSC_SUPPORTED_HW_FEATURES;
+ net_device_ctx->tx_checksum_mask = 0;
+
/* Compute tx offload settings based on hw capabilities */
- net->hw_features = NETIF_F_RXCSUM;
+ net->hw_features |= NETIF_F_RXCSUM;
if ((hwcaps.csum.ip4_txcsum & NDIS_TXCSUM_ALL_TCP4) == NDIS_TXCSUM_ALL_TCP4) {
/* Can checksum TCP */
@@ -1246,10 +1201,75 @@ struct netvsc_device *rndis_filter_device_add(struct hv_device *dev,
}
}
+ /* In case some hw_features disappeared we need to remove them from
+ * net->features list as they're no longer supported.
+ */
+ net->features &= ~NETVSC_SUPPORTED_HW_FEATURES | net->hw_features;
+
netif_set_gso_max_size(net, gso_max_size);
- ret = rndis_filter_set_offload_params(net, net_device, &offloads);
- if (ret)
+ ret = rndis_filter_set_offload_params(net, nvdev, &offloads);
+
+ return ret;
+}
+
+struct netvsc_device *rndis_filter_device_add(struct hv_device *dev,
+ struct netvsc_device_info *device_info)
+{
+ struct net_device *net = hv_get_drvdata(dev);
+ struct netvsc_device *net_device;
+ struct rndis_device *rndis_device;
+ struct ndis_recv_scale_cap rsscap;
+ u32 rsscap_size = sizeof(struct ndis_recv_scale_cap);
+ u32 mtu, size;
+ const struct cpumask *node_cpu_mask;
+ u32 num_possible_rss_qs;
+ int i, ret;
+
+ rndis_device = get_rndis_device();
+ if (!rndis_device)
+ return ERR_PTR(-ENODEV);
+
+ /* Let the inner driver handle this first to create the netvsc channel
+ * NOTE! Once the channel is created, we may get a receive callback
+ * (RndisFilterOnReceive()) before this call is completed
+ */
+ net_device = netvsc_device_add(dev, device_info);
+ if (IS_ERR(net_device)) {
+ kfree(rndis_device);
+ return net_device;
+ }
+
+ /* Initialize the rndis device */
+ net_device->max_chn = 1;
+ net_device->num_chn = 1;
+
+ net_device->extension = rndis_device;
+ rndis_device->ndev = net;
+
+ /* Send the rndis initialization message */
+ ret = rndis_filter_init_device(rndis_device, net_device);
+ if (ret != 0)
+ goto err_dev_remv;
+
+ /* Get the MTU from the host */
+ size = sizeof(u32);
+ ret = rndis_filter_query_device(rndis_device, net_device,
+ RNDIS_OID_GEN_MAXIMUM_FRAME_SIZE,
+ &mtu, &size);
+ if (ret == 0 && size == sizeof(u32) && mtu < net->mtu)
+ net->mtu = mtu;
+
+ /* Get the mac address */
+ ret = rndis_filter_query_device_mac(rndis_device, net_device);
+ if (ret != 0)
+ goto err_dev_remv;
+
+ memcpy(device_info->mac_adr, rndis_device->hw_mac_adr, ETH_ALEN);
+
+ /* Query and set hardware capabilities */
+ ret = rndis_netdev_set_hwcaps(rndis_device, net_device);
+ if (ret != 0)
goto err_dev_remv;
rndis_filter_query_device_link_status(rndis_device, net_device);
--
2.17.0
next prev parent reply other threads:[~2018-05-14 22:32 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-14 22:31 [PATCH net-stable 00/24] hv_netvsc patches for 4.14 stable Stephen Hemminger
2018-05-14 22:32 ` [PATCH net-stable 01/24] hv_netvsc: Fix the real number of queues of non-vRSS cases Stephen Hemminger
2018-05-14 22:32 ` [PATCH net-stable 02/24] hv_netvsc: Rename ind_table to rx_table Stephen Hemminger
2018-05-14 22:32 ` [PATCH net-stable 03/24] hv_netvsc: Rename tx_send_table to tx_table Stephen Hemminger
2018-05-14 22:32 ` [PATCH net-stable 04/24] hv_netvsc: Add initialization of tx_table in netvsc_device_add() Stephen Hemminger
2018-05-14 22:32 ` [PATCH net-stable 05/24] hv_netvsc: Set tx_table to equal weight after subchannels open Stephen Hemminger
2018-05-14 22:32 ` [PATCH net-stable 06/24] hv_netvsc: netvsc_teardown_gpadl() split Stephen Hemminger
2018-05-14 22:32 ` Stephen Hemminger [this message]
2018-05-14 22:32 ` [PATCH net-stable 08/24] hv_netvsc: empty current transmit aggregation if flow blocked Stephen Hemminger
2018-05-14 22:32 ` [PATCH net-stable 09/24] hv_netvsc: Use the num_online_cpus() for channel limit Stephen Hemminger
2018-05-14 22:32 ` [PATCH net-stable 10/24] hv_netvsc: avoid retry on send during shutdown Stephen Hemminger
2018-05-14 22:32 ` [PATCH net-stable 11/24] hv_netvsc: only wake transmit queue if link is up Stephen Hemminger
2018-05-14 22:32 ` [PATCH net-stable 12/24] hv_netvsc: fix error unwind handling if vmbus_open fails Stephen Hemminger
2018-05-14 22:32 ` [PATCH net-stable 13/24] hv_netvsc: cancel subchannel setup before halting device Stephen Hemminger
2018-05-14 22:32 ` [PATCH net-stable 14/24] hv_netvsc: fix race in napi poll when rescheduling Stephen Hemminger
2018-05-14 22:32 ` [PATCH net-stable 15/24] hv_netvsc: defer queue selection to VF Stephen Hemminger
2018-05-14 22:32 ` [PATCH net-stable 16/24] hv_netvsc: disable NAPI before channel close Stephen Hemminger
2018-05-14 22:32 ` [PATCH net-stable 17/24] hv_netvsc: use RCU to fix concurrent rx and queue changes Stephen Hemminger
2018-05-14 22:32 ` [PATCH net-stable 18/24] hv_netvsc: change GPAD teardown order on older versions Stephen Hemminger
2018-05-14 22:32 ` [PATCH net-stable 19/24] hv_netvsc: common detach logic Stephen Hemminger
2018-05-14 22:32 ` [PATCH net-stable 20/24] hv_netvsc: Use Windows version instead of NVSP version on GPAD teardown Stephen Hemminger
2018-05-14 22:32 ` [PATCH net-stable 21/24] hv_netvsc: Split netvsc_revoke_buf() and netvsc_teardown_gpadl() Stephen Hemminger
2018-05-14 22:32 ` [PATCH net-stable 22/24] hv_netvsc: Ensure correct teardown message sequence order Stephen Hemminger
2018-05-14 22:32 ` [PATCH net-stable 23/24] hv_netvsc: Fix net device attach on older Windows hosts Stephen Hemminger
2018-05-14 22:32 ` [PATCH net-stable 24/24] hv_netvsc: set master device Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180514223223.25433-8-sthemmin@microsoft.com \
--to=stephen@networkplumber.org \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
--cc=vkuznets@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox