From mboxrd@z Thu Jan 1 00:00:00 1970 From: Antoine Tenart Subject: [PATCH net-next v3 09/10] arm64: dts: marvell: 8040-db: describe the 10G interfaces as fixed-link Date: Thu, 17 May 2018 10:29:38 +0200 Message-ID: <20180517082939.14598-10-antoine.tenart@bootlin.com> References: <20180517082939.14598-1-antoine.tenart@bootlin.com> Cc: Antoine Tenart , netdev@vger.kernel.org, linux-kernel@vger.kernel.org, thomas.petazzoni@bootlin.com, maxime.chevallier@bootlin.com, miquel.raynal@bootlin.com, nadavh@marvell.com, stefanc@marvell.com, ymarkman@marvell.com, mw@semihalf.com, linux-arm-kernel@lists.infradead.org To: davem@davemloft.net, kishon@ti.com, linux@armlinux.org.uk, gregory.clement@bootlin.com, andrew@lunn.ch, jason@lakedaemon.net, sebastian.hesselbarth@gmail.com Return-path: In-Reply-To: <20180517082939.14598-1-antoine.tenart@bootlin.com> Sender: linux-kernel-owner@vger.kernel.org List-Id: netdev.vger.kernel.org This patch adds a fixed-link node to both 10G interfaces of the 8040-db board. This is required as the mvpp2 driver now uses phylink. The best solution would have been to describe the SFP cages but they are not wired correctly, and thus unusable, so we chose to use fixed-link instead. Signed-off-by: Antoine Tenart --- arch/arm64/boot/dts/marvell/armada-8040-db.dts | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts index 5689fb23bbab..1bac437369a1 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts @@ -177,6 +177,11 @@ &cp0_eth0 { status = "okay"; phy-mode = "10gbase-kr"; + + fixed-link { + speed = <10000>; + full-duplex; + }; }; &cp0_eth2 { @@ -303,6 +308,11 @@ &cp1_eth0 { status = "okay"; phy-mode = "10gbase-kr"; + + fixed-link { + speed = <10000>; + full-duplex; + }; }; &cp1_eth1 { -- 2.17.0