From: dsahern@kernel.org
To: netdev@vger.kernel.org, stephen@networkplumber.org
Cc: David Ahern <dsahern@gmail.com>
Subject: [PATCH iproute2] ip link: Do not call ll_name_to_index when creating a new link
Date: Thu, 17 May 2018 16:22:37 -0600 [thread overview]
Message-ID: <20180517222237.72388-1-dsahern@kernel.org> (raw)
From: David Ahern <dsahern@gmail.com>
Using iproute2 to create a bridge and add 4094 vlans to it can take from
2 to 3 *minutes*. The reason is the extraneous call to ll_name_to_index.
ll_name_to_index results in an ioctl(SIOCGIFINDEX) call which in turn
invokes dev_load. If the index does not exist, which it won't when
creating a new link, dev_load calls modprobe twice -- once for
netdev-NAME and again for NAME. This is unnecessary overhead for each
link create.
When ip link is invoked for a new device, there is no reason to
call ll_name_to_index for the new device. With this patch, creating
a bridge and adding 4094 vlans takes less than 3 *seconds*.
Signed-off-by: David Ahern <dsahern@gmail.com>
---
ip/ip_common.h | 3 ++-
ip/iplink.c | 22 +++++++++++++---------
ip/iplink_vxcan.c | 3 ++-
ip/link_veth.c | 3 ++-
4 files changed, 19 insertions(+), 12 deletions(-)
diff --git a/ip/ip_common.h b/ip/ip_common.h
index 1b89795caa58..67f413474631 100644
--- a/ip/ip_common.h
+++ b/ip/ip_common.h
@@ -132,7 +132,8 @@ struct link_util {
struct link_util *get_link_kind(const char *kind);
-int iplink_parse(int argc, char **argv, struct iplink_req *req, char **type);
+int iplink_parse(int argc, char **argv, struct iplink_req *req,
+ char **type, bool is_add_cmd);
/* iplink_bridge.c */
void br_dump_bridge_id(const struct ifla_bridge_id *id, char *buf, size_t len);
diff --git a/ip/iplink.c b/ip/iplink.c
index e6bb4493120e..c8bf49ed3d24 100644
--- a/ip/iplink.c
+++ b/ip/iplink.c
@@ -571,7 +571,8 @@ static int iplink_parse_vf(int vf, int *argcp, char ***argvp,
return 0;
}
-int iplink_parse(int argc, char **argv, struct iplink_req *req, char **type)
+int iplink_parse(int argc, char **argv, struct iplink_req *req, char **type,
+ bool is_add_cmd)
{
char *name = NULL;
char *dev = NULL;
@@ -610,7 +611,8 @@ int iplink_parse(int argc, char **argv, struct iplink_req *req, char **type)
name = *argv;
if (!dev) {
dev = name;
- dev_index = ll_name_to_index(dev);
+ if (!is_add_cmd)
+ dev_index = ll_name_to_index(dev);
}
} else if (strcmp(*argv, "index") == 0) {
NEXT_ARG();
@@ -919,7 +921,8 @@ int iplink_parse(int argc, char **argv, struct iplink_req *req, char **type)
if (check_ifname(*argv))
invarg("\"dev\" not a valid ifname", *argv);
dev = *argv;
- dev_index = ll_name_to_index(dev);
+ if (!is_add_cmd)
+ dev_index = ll_name_to_index(dev);
}
argc--; argv++;
}
@@ -1011,7 +1014,8 @@ int iplink_parse(int argc, char **argv, struct iplink_req *req, char **type)
return ret;
}
-static int iplink_modify(int cmd, unsigned int flags, int argc, char **argv)
+static int iplink_modify(int cmd, unsigned int flags, int argc, char **argv,
+ bool is_add_cmd)
{
char *type = NULL;
struct iplink_req req = {
@@ -1022,7 +1026,7 @@ static int iplink_modify(int cmd, unsigned int flags, int argc, char **argv)
};
int ret;
- ret = iplink_parse(argc, argv, &req, &type);
+ ret = iplink_parse(argc, argv, &req, &type, is_add_cmd);
if (ret < 0)
return ret;
@@ -1630,18 +1634,18 @@ int do_iplink(int argc, char **argv)
if (matches(*argv, "add") == 0)
return iplink_modify(RTM_NEWLINK,
NLM_F_CREATE|NLM_F_EXCL,
- argc-1, argv+1);
+ argc-1, argv+1, true);
if (matches(*argv, "set") == 0 ||
matches(*argv, "change") == 0)
return iplink_modify(RTM_NEWLINK, 0,
- argc-1, argv+1);
+ argc-1, argv+1, false);
if (matches(*argv, "replace") == 0)
return iplink_modify(RTM_NEWLINK,
NLM_F_CREATE|NLM_F_REPLACE,
- argc-1, argv+1);
+ argc-1, argv+1, false);
if (matches(*argv, "delete") == 0)
return iplink_modify(RTM_DELLINK, 0,
- argc-1, argv+1);
+ argc-1, argv+1, false);
} else {
#if IPLINK_IOCTL_COMPAT
if (matches(*argv, "set") == 0)
diff --git a/ip/iplink_vxcan.c b/ip/iplink_vxcan.c
index 8b08c9a70c65..e30a784d9851 100644
--- a/ip/iplink_vxcan.c
+++ b/ip/iplink_vxcan.c
@@ -56,7 +56,8 @@ static int vxcan_parse_opt(struct link_util *lu, int argc, char **argv,
n->nlmsg_len += sizeof(struct ifinfomsg);
- err = iplink_parse(argc - 1, argv + 1, (struct iplink_req *)n, &type);
+ err = iplink_parse(argc - 1, argv + 1, (struct iplink_req *)n, &type,
+ false);
if (err < 0)
return err;
diff --git a/ip/link_veth.c b/ip/link_veth.c
index 33e8f2b102e7..68823931c0ec 100644
--- a/ip/link_veth.c
+++ b/ip/link_veth.c
@@ -54,7 +54,8 @@ static int veth_parse_opt(struct link_util *lu, int argc, char **argv,
n->nlmsg_len += sizeof(struct ifinfomsg);
- err = iplink_parse(argc - 1, argv + 1, (struct iplink_req *)n, &type);
+ err = iplink_parse(argc - 1, argv + 1, (struct iplink_req *)n, &type,
+ false);
if (err < 0)
return err;
--
2.11.0
next reply other threads:[~2018-05-17 22:22 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-17 22:22 dsahern [this message]
2018-05-17 22:36 ` [PATCH iproute2] ip link: Do not call ll_name_to_index when creating a new link Stephen Hemminger
2018-05-17 22:47 ` David Ahern
2018-05-18 0:17 ` David Ahern
2018-05-18 22:08 ` Stephen Hemminger
2018-05-18 23:40 ` David Ahern
2018-05-25 15:21 ` Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180517222237.72388-1-dsahern@kernel.org \
--to=dsahern@kernel.org \
--cc=dsahern@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=stephen@networkplumber.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).