From mboxrd@z Thu Jan 1 00:00:00 1970 From: David Miller Subject: Re: [PATCH net-next] net: phy: broadcom: Enable 125 MHz clock on LED4 pin for BCM54612E by default. Date: Tue, 05 Jun 2018 09:43:55 -0400 (EDT) Message-ID: <20180605.094355.792945245388556236.davem@davemloft.net> References: <20180604201704.238472-1-kunyi@google.com> Mime-Version: 1.0 Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Cc: netdev@vger.kernel.org, Avi.Fishman@nuvoton.com, tali.perry@nuvoton.com, tomer.maimon@nuvoton.com, benjaminfair@google.com, rlippert@google.com, f.fainelli@gmail.com To: kunyi@google.com Return-path: Received: from shards.monkeyblade.net ([184.105.139.130]:36006 "EHLO shards.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751842AbeFENn5 (ORCPT ); Tue, 5 Jun 2018 09:43:57 -0400 In-Reply-To: <20180604201704.238472-1-kunyi@google.com> Sender: netdev-owner@vger.kernel.org List-ID: From: Kun Yi Date: Mon, 4 Jun 2018 13:17:04 -0700 > BCM54612E have 4 multi-functional LED pins that can be configured > through register setting; the LED4 pin can be configured to a 125MHz > reference clock output by setting the spare register. Since the dedicated > CLK125 reference clock pin is not brought out on the 48-Pin MLP, the LED4 > pin is the only pin to provide such function in this package, and therefore > it is beneficial to just enable the reference clock by default. > > Signed-off-by: Kun Yi Applied, thank you.