From: Govindarajulu Varadarajan <gvaradar@cisco.com>
To: davem@davemloft.net, benve@cisco.com, netdev@vger.kernel.org
Cc: Govindarajulu Varadarajan <gvaradar@cisco.com>
Subject: [PATCH net] enic: initialize enic->rfs_h.lock in enic_probe
Date: Tue, 19 Jun 2018 08:15:24 -0700 [thread overview]
Message-ID: <20180619151524.1326-1-gvaradar@cisco.com> (raw)
lockdep spotted that we are using rfs_h.lock in enic_get_rxnfc() without
initializing. rfs_h.lock is initialized in enic_open(). But ethtool_ops
can be called when interface is down.
Move enic_rfs_flw_tbl_init to enic_probe.
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 18 PID: 1189 Comm: ethtool Not tainted 4.17.0-rc7-devel+ #27
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014
Call Trace:
dump_stack+0x85/0xc0
register_lock_class+0x550/0x560
? __handle_mm_fault+0xa8b/0x1100
__lock_acquire+0x81/0x670
lock_acquire+0xb9/0x1e0
? enic_get_rxnfc+0x139/0x2b0 [enic]
_raw_spin_lock_bh+0x38/0x80
? enic_get_rxnfc+0x139/0x2b0 [enic]
enic_get_rxnfc+0x139/0x2b0 [enic]
ethtool_get_rxnfc+0x8d/0x1c0
dev_ethtool+0x16c8/0x2400
? __mutex_lock+0x64d/0xa00
? dev_load+0x6a/0x150
dev_ioctl+0x253/0x4b0
sock_do_ioctl+0x9a/0x130
sock_ioctl+0x1af/0x350
do_vfs_ioctl+0x8e/0x670
? syscall_trace_enter+0x1e2/0x380
ksys_ioctl+0x60/0x90
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x5a/0x170
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com>
---
drivers/net/ethernet/cisco/enic/enic_clsf.c | 3 +--
drivers/net/ethernet/cisco/enic/enic_main.c | 3 ++-
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/cisco/enic/enic_clsf.c b/drivers/net/ethernet/cisco/enic/enic_clsf.c
index 973c1fb70d09..99038dfc7fbe 100644
--- a/drivers/net/ethernet/cisco/enic/enic_clsf.c
+++ b/drivers/net/ethernet/cisco/enic/enic_clsf.c
@@ -79,7 +79,6 @@ void enic_rfs_flw_tbl_init(struct enic *enic)
enic->rfs_h.max = enic->config.num_arfs;
enic->rfs_h.free = enic->rfs_h.max;
enic->rfs_h.toclean = 0;
- enic_rfs_timer_start(enic);
}
void enic_rfs_flw_tbl_free(struct enic *enic)
@@ -88,7 +87,6 @@ void enic_rfs_flw_tbl_free(struct enic *enic)
enic_rfs_timer_stop(enic);
spin_lock_bh(&enic->rfs_h.lock);
- enic->rfs_h.free = 0;
for (i = 0; i < (1 << ENIC_RFS_FLW_BITSHIFT); i++) {
struct hlist_head *hhead;
struct hlist_node *tmp;
@@ -99,6 +97,7 @@ void enic_rfs_flw_tbl_free(struct enic *enic)
enic_delfltr(enic, n->fltr_id);
hlist_del(&n->node);
kfree(n);
+ enic->rfs_h.free++;
}
}
spin_unlock_bh(&enic->rfs_h.lock);
diff --git a/drivers/net/ethernet/cisco/enic/enic_main.c b/drivers/net/ethernet/cisco/enic/enic_main.c
index 30d2eaa18c04..e6ad581eadd8 100644
--- a/drivers/net/ethernet/cisco/enic/enic_main.c
+++ b/drivers/net/ethernet/cisco/enic/enic_main.c
@@ -1971,7 +1971,7 @@ static int enic_open(struct net_device *netdev)
vnic_intr_unmask(&enic->intr[i]);
enic_notify_timer_start(enic);
- enic_rfs_flw_tbl_init(enic);
+ enic_rfs_timer_start(enic);
return 0;
@@ -2904,6 +2904,7 @@ static int enic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
timer_setup(&enic->notify_timer, enic_notify_timer, 0);
+ enic_rfs_flw_tbl_init(enic);
enic_set_rx_coal_setting(enic);
INIT_WORK(&enic->reset, enic_reset);
INIT_WORK(&enic->tx_hang_reset, enic_tx_hang_reset);
--
2.17.1
next reply other threads:[~2018-06-19 22:15 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-19 15:15 Govindarajulu Varadarajan [this message]
2018-06-19 22:49 ` [PATCH net] enic: initialize enic->rfs_h.lock in enic_probe David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180619151524.1326-1-gvaradar@cisco.com \
--to=gvaradar@cisco.com \
--cc=benve@cisco.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).