netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Antoine Tenart <antoine.tenart@bootlin.com>
To: davem@davemloft.net
Cc: Antoine Tenart <antoine.tenart@bootlin.com>,
	f.fainelli@gmail.com, andrew@lunn.ch, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org, thomas.petazzoni@bootlin.com,
	alexandre.belloni@bootlin.com, quentin.schulz@bootlin.com,
	allan.nielsen@microsemi.com
Subject: [PATCH net] net: mscc: fix the injection header
Date: Wed, 20 Jun 2018 10:50:46 +0200	[thread overview]
Message-ID: <20180620085046.2377-1-antoine.tenart@bootlin.com> (raw)

When injecting frames in the Ocelot switch driver an injection header
(IFH) should be used to configure various parameters related to a given
frame, such as the port onto which the frame should be departed or its
vlan id. Other parameters in the switch configuration can led to an
injected frame being sent without an IFH but this led to various issues
as the per-frame parameters are then not used. This is especially true
when using multiple ports for injection.

The IFH was injected with the wrong endianness which led to the switch
not taking it into account as the IFH_INJ_BYPASS bit was then unset.
(The bit tells the switch to use the IFH over its internal
configuration). This patch fixes it.

In addition to the endianness fix, the IFH is also fixed. As it was
(unwillingly) unused, some of its fields were not configured the right
way.

Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support")
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
---
 drivers/net/ethernet/mscc/ocelot.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
index fb2c8f8071e6..52c57e0ff617 100644
--- a/drivers/net/ethernet/mscc/ocelot.c
+++ b/drivers/net/ethernet/mscc/ocelot.c
@@ -344,10 +344,9 @@ static int ocelot_port_stop(struct net_device *dev)
 static int ocelot_gen_ifh(u32 *ifh, struct frame_info *info)
 {
 	ifh[0] = IFH_INJ_BYPASS;
-	ifh[1] = (0xff00 & info->port) >> 8;
+	ifh[1] = (0xf00 & info->port) >> 8;
 	ifh[2] = (0xff & info->port) << 24;
-	ifh[3] = IFH_INJ_POP_CNT_DISABLE | (info->cpuq << 20) |
-		 (info->tag_type << 16) | info->vid;
+	ifh[3] = (info->tag_type << 16) | info->vid;
 
 	return 0;
 }
@@ -370,11 +369,12 @@ static int ocelot_port_xmit(struct sk_buff *skb, struct net_device *dev)
 			 QS_INJ_CTRL_SOF, QS_INJ_CTRL, grp);
 
 	info.port = BIT(port->chip_port);
-	info.cpuq = 0xff;
+	info.tag_type = IFH_TAG_TYPE_C;
+	info.vid = skb_vlan_tag_get(skb);
 	ocelot_gen_ifh(ifh, &info);
 
 	for (i = 0; i < IFH_LEN; i++)
-		ocelot_write_rix(ocelot, ifh[i], QS_INJ_WR, grp);
+		ocelot_write_rix(ocelot, cpu_to_be32(ifh[i]), QS_INJ_WR, grp);
 
 	count = (skb->len + 3) / 4;
 	last = skb->len % 4;
-- 
2.17.1

             reply	other threads:[~2018-06-20  8:50 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-20  8:50 Antoine Tenart [this message]
2018-06-20 11:29 ` [PATCH net] net: mscc: fix the injection header Alexandre Belloni
2018-06-21  1:30 ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180620085046.2377-1-antoine.tenart@bootlin.com \
    --to=antoine.tenart@bootlin.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=allan.nielsen@microsemi.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=quentin.schulz@bootlin.com \
    --cc=thomas.petazzoni@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).