From mboxrd@z Thu Jan  1 00:00:00 1970
From: Andrew Lunn <andrew@lunn.ch>
Subject: Re: [PATCH v7 11/11] net: pch_gbe: Allow build on MIPS platforms
Date: Wed, 27 Jun 2018 19:54:44 +0200
Message-ID: <20180627175444.GI885@lunn.ch>
References: <20180627000612.27263-1-paul.burton@mips.com>
 <20180627000612.27263-12-paul.burton@mips.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Cc: netdev@vger.kernel.org, "David S . Miller" <davem@davemloft.net>
To: Paul Burton <paul.burton@mips.com>
Return-path: <netdev-owner@vger.kernel.org>
Received: from vps0.lunn.ch ([185.16.172.187]:44738 "EHLO vps0.lunn.ch"
        rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP
        id S934387AbeF0Ryq (ORCPT <rfc822;netdev@vger.kernel.org>);
        Wed, 27 Jun 2018 13:54:46 -0400
Content-Disposition: inline
In-Reply-To: <20180627000612.27263-12-paul.burton@mips.com>
Sender: netdev-owner@vger.kernel.org
List-ID: <netdev.vger.kernel.org>

On Tue, Jun 26, 2018 at 05:06:12PM -0700, Paul Burton wrote:
> Allow the pch_gbe driver to be built on MIPS platforms, allowing its use
> on the MIPS Boston development board.
> 
> Signed-off-by: Paul Burton <paul.burton@mips.com>
> Cc: Andrew Lunn <andrew@lunn.ch>
> Cc: David S. Miller <davem@davemloft.net>
> Cc: netdev@vger.kernel.org
> 
> ---
> 
> Changes in v7: None
> 
>  drivers/net/ethernet/oki-semi/pch_gbe/Kconfig | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/Kconfig b/drivers/net/ethernet/oki-semi/pch_gbe/Kconfig
> index 5276f4ff3b63..8e3630b9a9d1 100644
> --- a/drivers/net/ethernet/oki-semi/pch_gbe/Kconfig
> +++ b/drivers/net/ethernet/oki-semi/pch_gbe/Kconfig
> @@ -4,7 +4,7 @@
>  
>  config PCH_GBE
>  	tristate "OKI SEMICONDUCTOR IOH(ML7223/ML7831) GbE"
> -	depends on PCI && (X86_32 || COMPILE_TEST)
> +	depends on PCI && (X86_32 || MIPS || COMPILE_TEST)

Same question here as for the PTP driver.

     Andrew