[PATCH net-next v2 2/2] net: phy: DP83TC811: Fix SGMII enable/disable

[Dan Murphy <dmurphy@ti.com>]

If SGMII was selected in the DT then the device should
write the SGMII enable bit.

If SGMII is not selected in the DT then the SGMII bit
should be disabled.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
---

v2 - Removed erroneous defconfig addtion in the patch.

 drivers/net/phy/dp83tc811.c | 20 +++++++++-----------
 1 file changed, 9 insertions(+), 11 deletions(-)

diff --git a/drivers/net/phy/dp83tc811.c b/drivers/net/phy/dp83tc811.c
index f8653f5d8789..78cad134a79e 100644
--- a/drivers/net/phy/dp83tc811.c
+++ b/drivers/net/phy/dp83tc811.c
@@ -284,21 +284,19 @@ static int dp83811_config_init(struct phy_device *phydev)
 	if (err < 0)
 		return err;
 
+	value = phy_read(phydev, MII_DP83811_SGMII_CTRL);
 	if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
-		value = phy_read(phydev, MII_DP83811_SGMII_CTRL);
-		if (!(value & DP83811_SGMII_EN)) {
-			err = phy_write(phydev, MII_DP83811_SGMII_CTRL,
+		err = phy_write(phydev, MII_DP83811_SGMII_CTRL,
 					(DP83811_SGMII_EN | value));
-			if (err < 0)
-				return err;
-		} else {
-			err = phy_write(phydev, MII_DP83811_SGMII_CTRL,
-					(~DP83811_SGMII_EN & value));
-			if (err < 0)
-				return err;
-		}
+	} else {
+		err = phy_write(phydev, MII_DP83811_SGMII_CTRL,
+				(~DP83811_SGMII_EN & value));
 	}
 
+	if (err < 0)
+
+		return err;
+
 	value = DP83811_WOL_MAGIC_EN | DP83811_WOL_SECURE_ON | DP83811_WOL_EN;
 
 	return phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG,
-- 
2.17.0.582.gccdcbd54c