From: Julian Wiedmann <jwi@linux.ibm.com>
To: David Miller <davem@davemloft.net>
Cc: <netdev@vger.kernel.org>, <linux-s390@vger.kernel.org>,
Martin Schwidefsky <schwidefsky@de.ibm.com>,
Heiko Carstens <heiko.carstens@de.ibm.com>,
Stefan Raspl <raspl@linux.ibm.com>,
Ursula Braun <ubraun@linux.ibm.com>,
Julian Wiedmann <jwi@linux.ibm.com>
Subject: [PATCH net 5/5] s390/qeth: consistently re-enable device features
Date: Fri, 29 Jun 2018 19:45:54 +0200 [thread overview]
Message-ID: <20180629174554.53718-6-jwi@linux.ibm.com> (raw)
In-Reply-To: <20180629174554.53718-1-jwi@linux.ibm.com>
commit e830baa9c3f0 ("qeth: restore device features after recovery") and
commit ce3443564145 ("s390/qeth: rely on kernel for feature recovery")
made sure that the HW functions for device features get re-programmed
after recovery.
But we missed that the same handling is also required when a card is
first set offline (destroying all HW context), and then online again.
Fix this by moving the re-enable action out of the recovery-only path.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
---
drivers/s390/net/qeth_core.h | 2 +-
drivers/s390/net/qeth_core_main.c | 23 +++++++++++------------
drivers/s390/net/qeth_l2_main.c | 5 ++---
drivers/s390/net/qeth_l3_main.c | 3 ++-
4 files changed, 16 insertions(+), 17 deletions(-)
diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h
index 940fd7b558d3..a246a618f9a4 100644
--- a/drivers/s390/net/qeth_core.h
+++ b/drivers/s390/net/qeth_core.h
@@ -1040,7 +1040,7 @@ struct qeth_cmd_buffer *qeth_get_setassparms_cmd(struct qeth_card *,
__u16, __u16,
enum qeth_prot_versions);
int qeth_set_features(struct net_device *, netdev_features_t);
-void qeth_recover_features(struct net_device *dev);
+void qeth_enable_hw_features(struct net_device *dev);
netdev_features_t qeth_fix_features(struct net_device *, netdev_features_t);
netdev_features_t qeth_features_check(struct sk_buff *skb,
struct net_device *dev,
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index d20a69a3bc40..d01ac29fd986 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -6469,28 +6469,27 @@ static int qeth_set_ipa_rx_csum(struct qeth_card *card, bool on)
#define QETH_HW_FEATURES (NETIF_F_RXCSUM | NETIF_F_IP_CSUM | NETIF_F_TSO | \
NETIF_F_IPV6_CSUM)
/**
- * qeth_recover_features() - Restore device features after recovery
- * @dev: the recovering net_device
- *
- * Caller must hold rtnl lock.
+ * qeth_enable_hw_features() - (Re-)Enable HW functions for device features
+ * @dev: a net_device
*/
-void qeth_recover_features(struct net_device *dev)
+void qeth_enable_hw_features(struct net_device *dev)
{
- netdev_features_t features = dev->features;
struct qeth_card *card = dev->ml_priv;
+ netdev_features_t features;
+ rtnl_lock();
+ features = dev->features;
/* force-off any feature that needs an IPA sequence.
* netdev_update_features() will restart them.
*/
dev->features &= ~QETH_HW_FEATURES;
netdev_update_features(dev);
-
- if (features == dev->features)
- return;
- dev_warn(&card->gdev->dev,
- "Device recovery failed to restore all offload features\n");
+ if (features != dev->features)
+ dev_warn(&card->gdev->dev,
+ "Device recovery failed to restore all offload features\n");
+ rtnl_unlock();
}
-EXPORT_SYMBOL_GPL(qeth_recover_features);
+EXPORT_SYMBOL_GPL(qeth_enable_hw_features);
int qeth_set_features(struct net_device *dev, netdev_features_t features)
{
diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c
index 5464515b71f1..2487f0aeb165 100644
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -1119,6 +1119,8 @@ static int __qeth_l2_set_online(struct ccwgroup_device *gdev, int recovery_mode)
netif_carrier_off(card->dev);
qeth_set_allowed_threads(card, 0xffffffff, 0);
+
+ qeth_enable_hw_features(card->dev);
if (recover_flag == CARD_STATE_RECOVER) {
if (recovery_mode &&
card->info.type != QETH_CARD_TYPE_OSN) {
@@ -1130,9 +1132,6 @@ static int __qeth_l2_set_online(struct ccwgroup_device *gdev, int recovery_mode)
}
/* this also sets saved unicast addresses */
qeth_l2_set_rx_mode(card->dev);
- rtnl_lock();
- qeth_recover_features(card->dev);
- rtnl_unlock();
}
/* let user_space know that device is online */
kobject_uevent(&gdev->dev.kobj, KOBJ_CHANGE);
diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
index e7fa479adf47..5905dc63e256 100644
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -2662,6 +2662,8 @@ static int __qeth_l3_set_online(struct ccwgroup_device *gdev, int recovery_mode)
netif_carrier_on(card->dev);
else
netif_carrier_off(card->dev);
+
+ qeth_enable_hw_features(card->dev);
if (recover_flag == CARD_STATE_RECOVER) {
rtnl_lock();
if (recovery_mode)
@@ -2669,7 +2671,6 @@ static int __qeth_l3_set_online(struct ccwgroup_device *gdev, int recovery_mode)
else
dev_open(card->dev);
qeth_l3_set_rx_mode(card->dev);
- qeth_recover_features(card->dev);
rtnl_unlock();
}
qeth_trace_features(card);
--
2.16.4
next prev parent reply other threads:[~2018-06-29 17:46 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-29 17:45 [PATCH net 0/5] s390/qeth: fixes 2018-06-29 Julian Wiedmann
2018-06-29 17:45 ` [PATCH net 1/5] Revert "s390/qeth: use Read device to query hypervisor for MAC" Julian Wiedmann
2018-06-29 17:45 ` [PATCH net 2/5] s390/qeth: fix race when setting MAC address Julian Wiedmann
2018-06-29 17:45 ` [PATCH net 3/5] s390/qeth: avoid using is_multicast_ether_addr_64bits on (u8 *)[6] Julian Wiedmann
2018-06-29 17:45 ` [PATCH net 4/5] s390/qeth: don't clobber buffer on async TX completion Julian Wiedmann
2018-06-29 17:45 ` Julian Wiedmann [this message]
2018-06-30 12:20 ` [PATCH net 0/5] s390/qeth: fixes 2018-06-29 David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180629174554.53718-6-jwi@linux.ibm.com \
--to=jwi@linux.ibm.com \
--cc=davem@davemloft.net \
--cc=heiko.carstens@de.ibm.com \
--cc=linux-s390@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=raspl@linux.ibm.com \
--cc=schwidefsky@de.ibm.com \
--cc=ubraun@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).