From: Steffen Klassert <steffen.klassert@secunet.com>
To: David Miller <davem@davemloft.net>
Cc: Herbert Xu <herbert@gondor.apana.org.au>,
Steffen Klassert <steffen.klassert@secunet.com>,
<netdev@vger.kernel.org>
Subject: [PATCH 09/14] xfrm: don't check offload_handle for nonzero
Date: Fri, 27 Jul 2018 09:24:44 +0200 [thread overview]
Message-ID: <20180727072449.11896-10-steffen.klassert@secunet.com> (raw)
In-Reply-To: <20180727072449.11896-1-steffen.klassert@secunet.com>
From: Shannon Nelson <shannon.nelson@oracle.com>
The offload_handle should be an opaque data cookie for the driver
to use, much like the data cookie for a timer or alarm callback.
Thus, the XFRM stack should not be checking for non-zero, because
the driver might use that to store an array reference, which could
be zero, or some other zero but meaningful value.
We can remove the checks for non-zero because there are plenty
other attributes also being checked to see if there is an offload
in place for the SA in question.
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
---
net/ipv4/esp4_offload.c | 6 ++----
net/ipv6/esp6_offload.c | 6 ++----
net/xfrm/xfrm_device.c | 6 +++---
3 files changed, 7 insertions(+), 11 deletions(-)
diff --git a/net/ipv4/esp4_offload.c b/net/ipv4/esp4_offload.c
index 7cf755ef9efb..133589d693a9 100644
--- a/net/ipv4/esp4_offload.c
+++ b/net/ipv4/esp4_offload.c
@@ -135,8 +135,7 @@ static struct sk_buff *esp4_gso_segment(struct sk_buff *skb,
skb->encap_hdr_csum = 1;
- if (!(features & NETIF_F_HW_ESP) || !x->xso.offload_handle ||
- (x->xso.dev != skb->dev))
+ if (!(features & NETIF_F_HW_ESP) || x->xso.dev != skb->dev)
esp_features = features & ~(NETIF_F_SG | NETIF_F_CSUM_MASK);
else if (!(features & NETIF_F_HW_ESP_TX_CSUM))
esp_features = features & ~NETIF_F_CSUM_MASK;
@@ -179,8 +178,7 @@ static int esp_xmit(struct xfrm_state *x, struct sk_buff *skb, netdev_features_
if (!xo)
return -EINVAL;
- if (!(features & NETIF_F_HW_ESP) || !x->xso.offload_handle ||
- (x->xso.dev != skb->dev)) {
+ if (!(features & NETIF_F_HW_ESP) || x->xso.dev != skb->dev) {
xo->flags |= CRYPTO_FALLBACK;
hw_offload = false;
}
diff --git a/net/ipv6/esp6_offload.c b/net/ipv6/esp6_offload.c
index 27f59b61f70f..96af267835c3 100644
--- a/net/ipv6/esp6_offload.c
+++ b/net/ipv6/esp6_offload.c
@@ -162,8 +162,7 @@ static struct sk_buff *esp6_gso_segment(struct sk_buff *skb,
skb->encap_hdr_csum = 1;
- if (!(features & NETIF_F_HW_ESP) || !x->xso.offload_handle ||
- (x->xso.dev != skb->dev))
+ if (!(features & NETIF_F_HW_ESP) || x->xso.dev != skb->dev)
esp_features = features & ~(NETIF_F_SG | NETIF_F_CSUM_MASK);
else if (!(features & NETIF_F_HW_ESP_TX_CSUM))
esp_features = features & ~NETIF_F_CSUM_MASK;
@@ -207,8 +206,7 @@ static int esp6_xmit(struct xfrm_state *x, struct sk_buff *skb, netdev_features
if (!xo)
return -EINVAL;
- if (!(features & NETIF_F_HW_ESP) || !x->xso.offload_handle ||
- (x->xso.dev != skb->dev)) {
+ if (!(features & NETIF_F_HW_ESP) || x->xso.dev != skb->dev) {
xo->flags |= CRYPTO_FALLBACK;
hw_offload = false;
}
diff --git a/net/xfrm/xfrm_device.c b/net/xfrm/xfrm_device.c
index 11d56a44e9e8..5611b7521020 100644
--- a/net/xfrm/xfrm_device.c
+++ b/net/xfrm/xfrm_device.c
@@ -56,7 +56,7 @@ struct sk_buff *validate_xmit_xfrm(struct sk_buff *skb, netdev_features_t featur
if (skb_is_gso(skb)) {
struct net_device *dev = skb->dev;
- if (unlikely(!x->xso.offload_handle || (x->xso.dev != dev))) {
+ if (unlikely(x->xso.dev != dev)) {
struct sk_buff *segs;
/* Packet got rerouted, fixup features and segment it. */
@@ -211,8 +211,8 @@ bool xfrm_dev_offload_ok(struct sk_buff *skb, struct xfrm_state *x)
if (!x->type_offload || x->encap)
return false;
- if ((!dev || (x->xso.offload_handle && (dev == xfrm_dst_path(dst)->dev))) &&
- (!xdst->child->xfrm && x->type->get_mtu)) {
+ if ((!dev || (dev == xfrm_dst_path(dst)->dev)) &&
+ (!xdst->child->xfrm && x->type->get_mtu)) {
mtu = x->type->get_mtu(x, xdst->child_mtu_cached);
if (skb->len <= mtu)
--
2.14.1
next prev parent reply other threads:[~2018-07-27 8:45 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-27 7:24 pull request (net-next): ipsec-next 2018-07-27 Steffen Klassert
2018-07-27 7:24 ` [PATCH 01/14] xfrm: Extend the output_mark to support input direction and masking Steffen Klassert
2018-07-27 7:24 ` [PATCH 02/14] flow: Extend flow informations with xfrm interface id Steffen Klassert
2018-07-27 7:24 ` [PATCH 03/14] xfrm: Add a new lookup key to match xfrm interfaces Steffen Klassert
2018-07-27 7:24 ` [PATCH 04/14] xfrm: Add virtual " Steffen Klassert
2018-07-27 7:24 ` [PATCH 05/14] xfrm: policy: remove pcpu policy cache Steffen Klassert
2018-07-27 7:24 ` [PATCH 06/14] xfrm: Allow Set Mark to be Updated Using UPDSA Steffen Klassert
2018-07-27 7:24 ` [PATCH 07/14] xfrm: use time64_t for in-kernel timestamps Steffen Klassert
2018-07-27 7:24 ` [PATCH 08/14] ipv6: xfrm: use 64-bit timestamps Steffen Klassert
2018-07-27 7:24 ` Steffen Klassert [this message]
2018-07-27 7:24 ` [PATCH 10/14] xfrm: Remove xfrmi interface ID from flowi Steffen Klassert
2018-07-27 7:24 ` [PATCH 11/14] xfrm: Allow xfrmi if_id to be updated by UPDSA Steffen Klassert
2018-07-27 7:24 ` [PATCH 12/14] xfrm: fix 'passing zero to ERR_PTR()' warning Steffen Klassert
2018-07-27 7:24 ` [PATCH 13/14] xfrm: Return detailed errors from xfrmi_newlink Steffen Klassert
2018-07-27 7:24 ` [PATCH 14/14] xfrm: fix ptr_ret.cocci warnings Steffen Klassert
2018-07-27 16:37 ` pull request (net-next): ipsec-next 2018-07-27 David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180727072449.11896-10-steffen.klassert@secunet.com \
--to=steffen.klassert@secunet.com \
--cc=davem@davemloft.net \
--cc=herbert@gondor.apana.org.au \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox