From mboxrd@z Thu Jan  1 00:00:00 1970
From: David Miller <davem@davemloft.net>
Subject: Re: [PATCH] net/phy: Micrel KSZ8061 PHY link failure after cable
 connect
Date: Mon, 30 Jul 2018 09:45:34 -0700 (PDT)
Message-ID: <20180730.094534.351189879060038512.davem@davemloft.net>
References: <1532959287-360-1-git-send-email-alexander.onnasch@landisgyr.com>
Mime-Version: 1.0
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Cc: andrew@lunn.ch, f.fainelli@gmail.com, netdev@vger.kernel.org,
        linux-kernel@vger.kernel.org
To: alexander.onnasch@landisgyr.com
Return-path: <linux-kernel-owner@vger.kernel.org>
In-Reply-To: <1532959287-360-1-git-send-email-alexander.onnasch@landisgyr.com>
Sender: linux-kernel-owner@vger.kernel.org
List-Id: netdev.vger.kernel.org

From: Alexander Onnasch <alexander.onnasch@landisgyr.com>
Date: Mon, 30 Jul 2018 16:01:27 +0200

> With Micrel KSZ8061 PHY, the link may occasionally not come up after
> Ethernet cable connect. The vendor's (Microchip, former Micrel) errata
> sheet 80000688A.pdf describes the problem and possible workarounds in
> detail, see below.
> The patch implements workaround 1, which permanently fixes the issue.
 ...
> Signed-off-by: Alexander Onnasch <alexander.onnasch@landisgyr.com>

This patch does not apply cleanly to any of my neworking trees.