Netdev List
 help / color / mirror / Atom feed
From: Ido Schimmel <idosch@mellanox.com>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, jiri@mellanox.com, petrm@mellanox.com,
	mlxsw@mellanox.com, Ido Schimmel <idosch@mellanox.com>
Subject: [PATCH net-next 3/3] mlxsw: spectrum: Configure MC-aware mode on mlxsw ports
Date: Sun,  5 Aug 2018 09:03:08 +0300	[thread overview]
Message-ID: <20180805060308.7862-4-idosch@mellanox.com> (raw)
In-Reply-To: <20180805060308.7862-1-idosch@mellanox.com>

From: Petr Machata <petrm@mellanox.com>

In order to give unicast traffic precedence over BUM traffic, configure
multicast-aware mode on all ports.

Under multicast-aware regime, when assigning traffic class to a packet,
the switch doesn't merely take the value prescribed by the QTCT
register. For BUM traffic, it instead assigns that value plus 8.

ETS elements for TCs 8..15 thus need to be configured as well. Extend
mlxsw_sp_port_ets_init() so that it maps each of them to the same
subgroup as their corresponding TC from the range 0..7, such that TCs X
and X+8 map to the same subgroup.

The existing code configures TCs with strict priority. So far this was
immaterial, because each TC had its own subgroup. Now that two TCs share
a subgroup it becomes important. TCs are prioritized in order of 7, 6,
..., 0, 15, 14, ..., 8: the higher TCs used for BUM traffic end up being
deprioritized. Since that's what's needed, keep that configuration as it
is, and configure the new TCs likewise.

Finally in mlxsw_sp_port_create(), invoke configuration of QTCTM to
enable MC-aware mode on each port.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
---
 .../net/ethernet/mellanox/mlxsw/spectrum.c    | 27 +++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
index 42312ff57b7e..e0aa0e5c65b2 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
@@ -2760,6 +2760,13 @@ static int mlxsw_sp_port_ets_init(struct mlxsw_sp_port *mlxsw_sp_port)
 					    false, 0);
 		if (err)
 			return err;
+
+		err = mlxsw_sp_port_ets_set(mlxsw_sp_port,
+					    MLXSW_REG_QEEC_HIERARCY_TC,
+					    i + 8, i,
+					    false, 0);
+		if (err)
+			return err;
 	}
 
 	/* Make sure the max shaper is disabled in all hierarchies that
@@ -2797,6 +2804,16 @@ static int mlxsw_sp_port_ets_init(struct mlxsw_sp_port *mlxsw_sp_port)
 	return 0;
 }
 
+static int mlxsw_sp_port_tc_mc_mode_set(struct mlxsw_sp_port *mlxsw_sp_port,
+					bool enable)
+{
+	struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp;
+	char qtctm_pl[MLXSW_REG_QTCTM_LEN];
+
+	mlxsw_reg_qtctm_pack(qtctm_pl, mlxsw_sp_port->local_port, enable);
+	return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(qtctm), qtctm_pl);
+}
+
 static int mlxsw_sp_port_create(struct mlxsw_sp *mlxsw_sp, u8 local_port,
 				bool split, u8 module, u8 width, u8 lane)
 {
@@ -2925,6 +2942,13 @@ static int mlxsw_sp_port_create(struct mlxsw_sp *mlxsw_sp, u8 local_port,
 		goto err_port_ets_init;
 	}
 
+	err = mlxsw_sp_port_tc_mc_mode_set(mlxsw_sp_port, true);
+	if (err) {
+		dev_err(mlxsw_sp->bus_info->dev, "Port %d: Failed to initialize TC MC mode\n",
+			mlxsw_sp_port->local_port);
+		goto err_port_tc_mc_mode;
+	}
+
 	/* ETS and buffers must be initialized before DCB. */
 	err = mlxsw_sp_port_dcb_init(mlxsw_sp_port);
 	if (err) {
@@ -2981,6 +3005,8 @@ static int mlxsw_sp_port_create(struct mlxsw_sp *mlxsw_sp, u8 local_port,
 err_port_fids_init:
 	mlxsw_sp_port_dcb_fini(mlxsw_sp_port);
 err_port_dcb_init:
+	mlxsw_sp_port_tc_mc_mode_set(mlxsw_sp_port, false);
+err_port_tc_mc_mode:
 err_port_ets_init:
 err_port_buffers_init:
 err_port_admin_status_set:
@@ -3015,6 +3041,7 @@ static void mlxsw_sp_port_remove(struct mlxsw_sp *mlxsw_sp, u8 local_port)
 	mlxsw_sp_tc_qdisc_fini(mlxsw_sp_port);
 	mlxsw_sp_port_fids_fini(mlxsw_sp_port);
 	mlxsw_sp_port_dcb_fini(mlxsw_sp_port);
+	mlxsw_sp_port_tc_mc_mode_set(mlxsw_sp_port, false);
 	mlxsw_sp_port_swid_set(mlxsw_sp_port, MLXSW_PORT_SWID_DISABLED_PORT);
 	mlxsw_sp_port_module_unmap(mlxsw_sp_port);
 	kfree(mlxsw_sp_port->sample);
-- 
2.17.1

  parent reply	other threads:[~2018-08-05  8:07 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-05  6:03 [PATCH net-next 0/3] mlxsw: Enable MC-aware mode for mlxsw ports Ido Schimmel
2018-08-05  6:03 ` [PATCH net-next 1/3] mlxsw: reg: Add QoS Switch Traffic Class Table is Multicast-Aware Register Ido Schimmel
2018-08-05  6:03 ` [PATCH net-next 2/3] mlxsw: spectrum: Fix a typo Ido Schimmel
2018-08-05  6:03 ` Ido Schimmel [this message]
2018-08-06  0:29 ` [PATCH net-next 0/3] mlxsw: Enable MC-aware mode for mlxsw ports David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180805060308.7862-4-idosch@mellanox.com \
    --to=idosch@mellanox.com \
    --cc=davem@davemloft.net \
    --cc=jiri@mellanox.com \
    --cc=mlxsw@mellanox.com \
    --cc=netdev@vger.kernel.org \
    --cc=petrm@mellanox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox