From: Eelco Chaudron <echaudro@redhat.com>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, stephen@networkplumber.org
Subject: [PATCH iproute2/net-next v2] tc_util: Add support for showing TCA_STATS_BASIC_HW statistics
Date: Fri, 10 Aug 2018 07:59:30 -0400 [thread overview]
Message-ID: <20180810115846.15762.3693.stgit@wsfd-netdev20.ntdv.lab.eng.bos.redhat.com> (raw)
Add support for showing hardware specific counters to easy
troubleshooting hardware offload.
$ tc -s filter show dev enp3s0np0 parent ffff:
filter protocol ip pref 1 flower chain 0
filter protocol ip pref 1 flower chain 0 handle 0x1
eth_type ipv4
dst_ip 2.0.0.0
src_ip 1.0.0.0
ip_flags nofrag
in_hw
action order 1: mirred (Egress Redirect to device eth1) stolen
index 1 ref 1 bind 1 installed 0 sec used 0 sec
Action statistics:
Sent 534884742 bytes 8915697 pkt (dropped 0, overlimits 0 requeues 0)
Sent software 187542 bytes 4077 pkt
Sent hardware 534697200 bytes 8911620 pkt
backlog 0b 0p requeues 0
cookie 89173e6a44447001becfd486bda17e29
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
---
v2:
* Removed unnecessary initialization
* Made not displaying of missing TCA_STATS_BASIC_HW more obvious
* Use _SL_ macro for single line output
include/uapi/linux/gen_stats.h | 1 +
tc/tc_util.c | 41 ++++++++++++++++++++++++++++++++++++++++
2 files changed, 42 insertions(+)
diff --git a/include/uapi/linux/gen_stats.h b/include/uapi/linux/gen_stats.h
index 24a861c..065408e 100644
--- a/include/uapi/linux/gen_stats.h
+++ b/include/uapi/linux/gen_stats.h
@@ -12,6 +12,7 @@ enum {
TCA_STATS_APP,
TCA_STATS_RATE_EST64,
TCA_STATS_PAD,
+ TCA_STATS_BASIC_HW,
__TCA_STATS_MAX,
};
#define TCA_STATS_MAX (__TCA_STATS_MAX - 1)
diff --git a/tc/tc_util.c b/tc/tc_util.c
index d757852..5a1bbf2 100644
--- a/tc/tc_util.c
+++ b/tc/tc_util.c
@@ -800,6 +800,44 @@ void print_tm(FILE *f, const struct tcf_t *tm)
}
}
+static void print_tcstats_basic_hw(struct rtattr **tbs, char *prefix)
+{
+ struct gnet_stats_basic bs_hw;
+
+ if (!tbs[TCA_STATS_BASIC_HW])
+ return;
+
+ memcpy(&bs_hw, RTA_DATA(tbs[TCA_STATS_BASIC_HW]),
+ MIN(RTA_PAYLOAD(tbs[TCA_STATS_BASIC_HW]), sizeof(bs_hw)));
+
+ if (bs_hw.bytes == 0 && bs_hw.packets == 0)
+ return;
+
+ if (tbs[TCA_STATS_BASIC]) {
+ struct gnet_stats_basic bs;
+
+ memcpy(&bs, RTA_DATA(tbs[TCA_STATS_BASIC]),
+ MIN(RTA_PAYLOAD(tbs[TCA_STATS_BASIC]),
+ sizeof(bs)));
+
+ if (bs.bytes >= bs_hw.bytes && bs.packets >= bs_hw.packets) {
+ print_string(PRINT_FP, NULL, "%s", _SL_);
+ print_string(PRINT_FP, NULL, "%s", prefix);
+ print_lluint(PRINT_ANY, "sw_bytes",
+ "Sent software %llu bytes",
+ bs.bytes - bs_hw.bytes);
+ print_uint(PRINT_ANY, "sw_packets", " %u pkt",
+ bs.packets - bs_hw.packets);
+ }
+ }
+
+ print_string(PRINT_FP, NULL, "%s", _SL_);
+ print_string(PRINT_FP, NULL, "%s", prefix);
+ print_lluint(PRINT_ANY, "hw_bytes", "Sent hardware %llu bytes",
+ bs_hw.bytes);
+ print_uint(PRINT_ANY, "hw_packets", " %u pkt", bs_hw.packets);
+}
+
void print_tcstats2_attr(FILE *fp, struct rtattr *rta, char *prefix, struct rtattr **xstats)
{
SPRINT_BUF(b1);
@@ -826,6 +864,9 @@ void print_tcstats2_attr(FILE *fp, struct rtattr *rta, char *prefix, struct rtat
print_uint(PRINT_ANY, "requeues", " requeues %u) ", q.requeues);
}
+ if (tbs[TCA_STATS_BASIC_HW])
+ print_tcstats_basic_hw(tbs, prefix);
+
if (tbs[TCA_STATS_RATE_EST64]) {
struct gnet_stats_rate_est64 re = {0};
next reply other threads:[~2018-08-10 14:29 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-10 11:59 Eelco Chaudron [this message]
2018-08-10 14:44 ` [PATCH iproute2/net-next v2] tc_util: Add support for showing TCA_STATS_BASIC_HW statistics Stephen Hemminger
2018-08-10 14:48 ` Eelco Chaudron
2018-10-01 7:08 ` Eelco Chaudron
2018-10-01 9:10 ` Stephen Hemminger
2018-10-01 10:29 ` Eelco Chaudron
2018-10-01 15:12 ` David Ahern
2018-10-02 7:28 ` Eelco Chaudron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180810115846.15762.3693.stgit@wsfd-netdev20.ntdv.lab.eng.bos.redhat.com \
--to=echaudro@redhat.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
--cc=stephen@networkplumber.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).