From: Guillaume Nault <g.nault@alphalink.fr>
To: Wei Wang <weiwan@google.com>
Cc: David Miller <davem@davemloft.net>,
netdev@vger.kernel.org, Martin KaFai Lau <kafai@fb.com>,
David Ahern <dsahern@gmail.com>,
Cong Wang <xiyou.wangcong@gmail.com>
Subject: Re: [PATCH net] l2tp: use sk_dst_check() to avoid race on sk->sk_dst_cache
Date: Fri, 10 Aug 2018 17:59:35 +0200 [thread overview]
Message-ID: <20180810155935.GA1430@alphalink.fr> (raw)
In-Reply-To: <20180809185405.38744-1-tracywwnj@gmail.com>
On Thu, Aug 09, 2018 at 11:54:05AM -0700, Wei Wang wrote:
> From: Wei Wang <weiwan@google.com>
>
> In l2tp code, if it is a L2TP_UDP_ENCAP tunnel, tunnel->sk points to a
> UDP socket. User could call sendmsg() on both this tunnel and the UDP
> socket itself concurrently. As l2tp_xmit_skb() holds socket lock and call
> __sk_dst_check() to refresh sk->sk_dst_cache, while udpv6_sendmsg() is
> lockless and call sk_dst_check() to refresh sk->sk_dst_cache, there
> could be a race and cause the dst cache to be freed multiple times.
> So we fix l2tp side code to always call sk_dst_check() to garantee
> xchg() is called when refreshing sk->sk_dst_cache to avoid race
> conditions.
>
> Syzkaller reported stack trace:
> BUG: KASAN: use-after-free in atomic_read include/asm-generic/atomic-instrumented.h:21 [inline]
> BUG: KASAN: use-after-free in atomic_fetch_add_unless include/linux/atomic.h:575 [inline]
> BUG: KASAN: use-after-free in atomic_add_unless include/linux/atomic.h:597 [inline]
> BUG: KASAN: use-after-free in dst_hold_safe include/net/dst.h:308 [inline]
> BUG: KASAN: use-after-free in ip6_hold_safe+0xe6/0x670 net/ipv6/route.c:1029
> Read of size 4 at addr ffff8801aea9a880 by task syz-executor129/4829
>
> CPU: 0 PID: 4829 Comm: syz-executor129 Not tainted 4.18.0-rc7-next-20180802+ #30
> Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
> Call Trace:
> __dump_stack lib/dump_stack.c:77 [inline]
> dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113
> print_address_description+0x6c/0x20b mm/kasan/report.c:256
> kasan_report_error mm/kasan/report.c:354 [inline]
> kasan_report.cold.7+0x242/0x30d mm/kasan/report.c:412
> check_memory_region_inline mm/kasan/kasan.c:260 [inline]
> check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267
> kasan_check_read+0x11/0x20 mm/kasan/kasan.c:272
> atomic_read include/asm-generic/atomic-instrumented.h:21 [inline]
> atomic_fetch_add_unless include/linux/atomic.h:575 [inline]
> atomic_add_unless include/linux/atomic.h:597 [inline]
> dst_hold_safe include/net/dst.h:308 [inline]
> ip6_hold_safe+0xe6/0x670 net/ipv6/route.c:1029
> rt6_get_pcpu_route net/ipv6/route.c:1249 [inline]
> ip6_pol_route+0x354/0xd20 net/ipv6/route.c:1922
> ip6_pol_route_output+0x54/0x70 net/ipv6/route.c:2098
> fib6_rule_lookup+0x283/0x890 net/ipv6/fib6_rules.c:122
> ip6_route_output_flags+0x2c5/0x350 net/ipv6/route.c:2126
> ip6_dst_lookup_tail+0x1278/0x1da0 net/ipv6/ip6_output.c:978
> ip6_dst_lookup_flow+0xc8/0x270 net/ipv6/ip6_output.c:1079
> ip6_sk_dst_lookup_flow+0x5ed/0xc50 net/ipv6/ip6_output.c:1117
> udpv6_sendmsg+0x2163/0x36b0 net/ipv6/udp.c:1354
> inet_sendmsg+0x1a1/0x690 net/ipv4/af_inet.c:798
> sock_sendmsg_nosec net/socket.c:622 [inline]
> sock_sendmsg+0xd5/0x120 net/socket.c:632
> ___sys_sendmsg+0x51d/0x930 net/socket.c:2115
> __sys_sendmmsg+0x240/0x6f0 net/socket.c:2210
> __do_sys_sendmmsg net/socket.c:2239 [inline]
> __se_sys_sendmmsg net/socket.c:2236 [inline]
> __x64_sys_sendmmsg+0x9d/0x100 net/socket.c:2236
> do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
> entry_SYSCALL_64_after_hwframe+0x49/0xbe
> RIP: 0033:0x446a29
> Code: e8 ac b8 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00
> RSP: 002b:00007f4de5532db8 EFLAGS: 00000246 ORIG_RAX: 0000000000000133
> RAX: ffffffffffffffda RBX: 00000000006dcc38 RCX: 0000000000446a29
> RDX: 00000000000000b8 RSI: 0000000020001b00 RDI: 0000000000000003
> RBP: 00000000006dcc30 R08: 00007f4de5533700 R09: 0000000000000000
> R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006dcc3c
> R13: 00007ffe2b830fdf R14: 00007f4de55339c0 R15: 0000000000000001
>
> Fixes: 71b1391a4128 ("l2tp: ensure sk->dst is still valid")
> Reported-by: syzbot+05f840f3b04f211bad55@syzkaller.appspotmail.com
> Signed-off-by: Wei Wang <weiwan@google.com>
> Signed-off-by: Martin KaFai Lau <kafai@fb.com>
> Cc: David Ahern <dsahern@gmail.com>
> Cc: Cong Wang <xiyou.wangcong@gmail.com>
> ---
> net/l2tp/l2tp_core.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/net/l2tp/l2tp_core.c b/net/l2tp/l2tp_core.c
> index 40261cb68e83..7166b61338d4 100644
> --- a/net/l2tp/l2tp_core.c
> +++ b/net/l2tp/l2tp_core.c
> @@ -1110,7 +1110,7 @@ int l2tp_xmit_skb(struct l2tp_session *session, struct sk_buff *skb, int hdr_len
>
> /* Get routing info from the tunnel socket */
> skb_dst_drop(skb);
> - skb_dst_set(skb, dst_clone(__sk_dst_check(sk, 0)));
> + skb_dst_set(skb, dst_clone(sk_dst_check(sk, 0)));
>
With sk_dst_check(), we're now holding an extra reference on the cached
dst. How is it dropped? Shouldn't we remove dst_clone()?
Also, does syzbot have a reproducer? I haven't found the original
report on the mailing list.
next prev parent reply other threads:[~2018-08-10 18:30 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-09 18:54 [PATCH net] l2tp: use sk_dst_check() to avoid race on sk->sk_dst_cache Wei Wang
2018-08-10 15:59 ` Guillaume Nault [this message]
2018-08-10 16:54 ` Wei Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180810155935.GA1430@alphalink.fr \
--to=g.nault@alphalink.fr \
--cc=davem@davemloft.net \
--cc=dsahern@gmail.com \
--cc=kafai@fb.com \
--cc=netdev@vger.kernel.org \
--cc=weiwan@google.com \
--cc=xiyou.wangcong@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox