From: Jakub Kicinski <jakub.kicinski@netronome.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, oss-drivers@netronome.com,
Jakub Kicinski <jakub.kicinski@netronome.com>
Subject: [PATCH net-next 04/15] nfp: add support for indirect HWinfo lookup
Date: Tue, 28 Aug 2018 13:20:36 -0700 [thread overview]
Message-ID: <20180828202047.1305-5-jakub.kicinski@netronome.com> (raw)
In-Reply-To: <20180828202047.1305-1-jakub.kicinski@netronome.com>
Management FW can adjust some of the information in the HWinfo table
at runtime. In some cases reading the table directly will not yield
correct results. Add a NSP command for looking up information.
Up until now we weren't making use of any of the values which may
get adjusted.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
---
.../ethernet/netronome/nfp/nfpcore/nfp_nsp.c | 38 +++++++++++++++++++
.../ethernet/netronome/nfp/nfpcore/nfp_nsp.h | 6 +++
2 files changed, 44 insertions(+)
diff --git a/drivers/net/ethernet/netronome/nfp/nfpcore/nfp_nsp.c b/drivers/net/ethernet/netronome/nfp/nfpcore/nfp_nsp.c
index 9eb7b5a91bb1..bf593a6b26a1 100644
--- a/drivers/net/ethernet/netronome/nfp/nfpcore/nfp_nsp.c
+++ b/drivers/net/ethernet/netronome/nfp/nfpcore/nfp_nsp.c
@@ -90,6 +90,8 @@
#define NFP_FW_LOAD_RET_MAJOR GENMASK(15, 8)
#define NFP_FW_LOAD_RET_MINOR GENMASK(23, 16)
+#define NFP_HWINFO_LOOKUP_SIZE GENMASK(11, 0)
+
enum nfp_nsp_cmd {
SPCODE_NOOP = 0, /* No operation */
SPCODE_SOFT_RESET = 1, /* Soft reset the NFP */
@@ -104,6 +106,7 @@ enum nfp_nsp_cmd {
SPCODE_NSP_SENSORS = 12, /* Read NSP sensor(s) */
SPCODE_NSP_IDENTIFY = 13, /* Read NSP version */
SPCODE_FW_STORED = 16, /* If no FW loaded, load flash app FW */
+ SPCODE_HWINFO_LOOKUP = 17, /* Lookup HWinfo with overwrites etc. */
};
static const struct {
@@ -703,3 +706,38 @@ int nfp_nsp_load_stored_fw(struct nfp_nsp *state)
nfp_nsp_load_fw_extended_msg(state, ret);
return 0;
}
+
+static int
+__nfp_nsp_hwinfo_lookup(struct nfp_nsp *state, void *buf, unsigned int size)
+{
+ struct nfp_nsp_command_buf_arg hwinfo_lookup = {
+ {
+ .code = SPCODE_HWINFO_LOOKUP,
+ .option = size,
+ },
+ .in_buf = buf,
+ .in_size = size,
+ .out_buf = buf,
+ .out_size = size,
+ };
+
+ return nfp_nsp_command_buf(state, &hwinfo_lookup);
+}
+
+int nfp_nsp_hwinfo_lookup(struct nfp_nsp *state, void *buf, unsigned int size)
+{
+ int err;
+
+ size = min_t(u32, size, NFP_HWINFO_LOOKUP_SIZE);
+
+ err = __nfp_nsp_hwinfo_lookup(state, buf, size);
+ if (err)
+ return err;
+
+ if (strnlen(buf, size) == size) {
+ nfp_err(state->cpp, "NSP HWinfo value not NULL-terminated\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
diff --git a/drivers/net/ethernet/netronome/nfp/nfpcore/nfp_nsp.h b/drivers/net/ethernet/netronome/nfp/nfpcore/nfp_nsp.h
index 65f2d4a6de02..bd6c9071c8e9 100644
--- a/drivers/net/ethernet/netronome/nfp/nfpcore/nfp_nsp.h
+++ b/drivers/net/ethernet/netronome/nfp/nfpcore/nfp_nsp.h
@@ -51,6 +51,7 @@ int nfp_nsp_load_fw(struct nfp_nsp *state, const struct firmware *fw);
int nfp_nsp_write_flash(struct nfp_nsp *state, const struct firmware *fw);
int nfp_nsp_mac_reinit(struct nfp_nsp *state);
int nfp_nsp_load_stored_fw(struct nfp_nsp *state);
+int nfp_nsp_hwinfo_lookup(struct nfp_nsp *state, void *buf, unsigned int size);
static inline bool nfp_nsp_has_mac_reinit(struct nfp_nsp *state)
{
@@ -62,6 +63,11 @@ static inline bool nfp_nsp_has_stored_fw_load(struct nfp_nsp *state)
return nfp_nsp_get_abi_ver_minor(state) > 23;
}
+static inline bool nfp_nsp_has_hwinfo_lookup(struct nfp_nsp *state)
+{
+ return nfp_nsp_get_abi_ver_minor(state) > 24;
+}
+
enum nfp_eth_interface {
NFP_INTERFACE_NONE = 0,
NFP_INTERFACE_SFP = 1,
--
2.17.1
next prev parent reply other threads:[~2018-08-29 0:15 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-28 20:20 [PATCH net-next 00/15] nfp: add NFP5000 support Jakub Kicinski
2018-08-28 20:20 ` [PATCH net-next 01/15] nfp: encapsulate NSP command arguments into structs Jakub Kicinski
2018-08-28 20:20 ` [PATCH net-next 02/15] nfp: attempt FW load from flash Jakub Kicinski
2018-08-28 20:20 ` [PATCH net-next 03/15] nfp: interpret extended FW load result codes Jakub Kicinski
2018-08-28 20:20 ` Jakub Kicinski [this message]
2018-08-28 20:20 ` [PATCH net-next 05/15] nfp: abm: look up MAC addresses via management FW Jakub Kicinski
2018-08-28 20:20 ` [PATCH net-next 06/15] nfp: add support for NFP5000 Jakub Kicinski
2018-08-28 20:20 ` [PATCH net-next 07/15] nfp: refactor the per-chip PCIe config Jakub Kicinski
2018-08-28 20:20 ` [PATCH net-next 08/15] nfp: save the MU locality field offset Jakub Kicinski
2018-08-28 20:20 ` [PATCH net-next 09/15] nfp: add basic errors messages to target logic Jakub Kicinski
2018-08-28 20:20 ` [PATCH net-next 10/15] nfp: add RTsym access helpers Jakub Kicinski
2018-08-28 20:20 ` [PATCH net-next 11/15] nfp: pass cpp_id to nfp_cpp_map_area() Jakub Kicinski
2018-08-28 20:20 ` [PATCH net-next 12/15] nfp: convert existing RTsym helpers to full target decoding Jakub Kicinski
2018-08-28 20:20 ` [PATCH net-next 13/15] nfp: convert all RTsym users to use new read/write helpers Jakub Kicinski
2018-08-28 20:20 ` [PATCH net-next 14/15] nfp: support access to absolute RTsyms Jakub Kicinski
2018-08-28 20:20 ` [PATCH net-next 15/15] nfp: make RTsym users handle absolute symbols correctly Jakub Kicinski
2018-08-29 0:01 ` [PATCH net-next 00/15] nfp: add NFP5000 support David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180828202047.1305-5-jakub.kicinski@netronome.com \
--to=jakub.kicinski@netronome.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
--cc=oss-drivers@netronome.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).