From: Jakub Kicinski <jakub.kicinski@netronome.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, oss-drivers@netronome.com,
Jakub Kicinski <jakub.kicinski@netronome.com>
Subject: [PATCH net-next 07/15] nfp: refactor the per-chip PCIe config
Date: Tue, 28 Aug 2018 13:20:39 -0700 [thread overview]
Message-ID: <20180828202047.1305-8-jakub.kicinski@netronome.com> (raw)
In-Reply-To: <20180828202047.1305-1-jakub.kicinski@netronome.com>
Use a switch statement instead of ifs for code dependent
on chip version. While at it make sure we fail for unknown
chip revisions.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
---
.../netronome/nfp/nfpcore/nfp6000_pcie.c | 50 ++++++++++++++-----
.../ethernet/netronome/nfp/nfpcore/nfp_cpp.h | 4 ++
2 files changed, 41 insertions(+), 13 deletions(-)
diff --git a/drivers/net/ethernet/netronome/nfp/nfpcore/nfp6000_pcie.c b/drivers/net/ethernet/netronome/nfp/nfpcore/nfp6000_pcie.c
index 6ef5ac2d0827..fd63d83bdea5 100644
--- a/drivers/net/ethernet/netronome/nfp/nfpcore/nfp6000_pcie.c
+++ b/drivers/net/ethernet/netronome/nfp/nfpcore/nfp6000_pcie.c
@@ -138,6 +138,7 @@
/* The number of explicit BARs to reserve.
* Minimum is 0, maximum is 4 on the NFP6000.
+ * The NFP3800 can have only one per PF.
*/
#define NFP_PCIE_EXPLICIT_BARS 2
@@ -589,8 +590,8 @@ static int enable_bars(struct nfp6000_pcie *nfp, u16 interface)
NFP_PCIE_BAR_PCIE2CPP_MapType_EXPLICIT3),
};
char status_msg[196] = {};
+ int i, err, bars_free;
struct nfp_bar *bar;
- int i, bars_free;
int expl_groups;
char *msg, *end;
@@ -643,6 +644,8 @@ static int enable_bars(struct nfp6000_pcie *nfp, u16 interface)
bar->iomem = ioremap_nocache(nfp_bar_resource_start(bar),
nfp_bar_resource_len(bar));
if (bar->iomem) {
+ int pf;
+
msg += snprintf(msg, end - msg, "0.0: General/MSI-X SRAM, ");
atomic_inc(&bar->refcnt);
bars_free--;
@@ -651,24 +654,40 @@ static int enable_bars(struct nfp6000_pcie *nfp, u16 interface)
nfp->expl.data = bar->iomem + NFP_PCIE_SRAM + 0x1000;
- if (nfp->pdev->device == PCI_DEVICE_ID_NETRONOME_NFP4000 ||
- nfp->pdev->device == PCI_DEVICE_ID_NETRONOME_NFP5000 ||
- nfp->pdev->device == PCI_DEVICE_ID_NETRONOME_NFP6000) {
- nfp->iomem.csr = bar->iomem + NFP_PCIE_BAR(0);
- } else {
- int pf = nfp->pdev->devfn & 7;
-
+ switch (nfp->pdev->device) {
+ case PCI_DEVICE_ID_NETRONOME_NFP3800:
+ pf = nfp->pdev->devfn & 7;
nfp->iomem.csr = bar->iomem + NFP_PCIE_BAR(pf);
+ break;
+ case PCI_DEVICE_ID_NETRONOME_NFP4000:
+ case PCI_DEVICE_ID_NETRONOME_NFP5000:
+ case PCI_DEVICE_ID_NETRONOME_NFP6000:
+ nfp->iomem.csr = bar->iomem + NFP_PCIE_BAR(0);
+ break;
+ default:
+ dev_err(nfp->dev, "Unsupported device ID: %04hx!\n",
+ nfp->pdev->device);
+ err = -EINVAL;
+ goto err_unmap_bar0;
}
nfp->iomem.em = bar->iomem + NFP_PCIE_EM;
}
- if (nfp->pdev->device == PCI_DEVICE_ID_NETRONOME_NFP4000 ||
- nfp->pdev->device == PCI_DEVICE_ID_NETRONOME_NFP5000 ||
- nfp->pdev->device == PCI_DEVICE_ID_NETRONOME_NFP6000)
- expl_groups = 4;
- else
+ switch (nfp->pdev->device) {
+ case PCI_DEVICE_ID_NETRONOME_NFP3800:
expl_groups = 1;
+ break;
+ case PCI_DEVICE_ID_NETRONOME_NFP4000:
+ case PCI_DEVICE_ID_NETRONOME_NFP5000:
+ case PCI_DEVICE_ID_NETRONOME_NFP6000:
+ expl_groups = 4;
+ break;
+ default:
+ dev_err(nfp->dev, "Unsupported device ID: %04hx!\n",
+ nfp->pdev->device);
+ err = -EINVAL;
+ goto err_unmap_bar0;
+ }
/* Configure, and lock, BAR0.1 for PCIe XPB (MSI-X PBA) */
bar = &nfp->bar[1];
@@ -713,6 +732,11 @@ static int enable_bars(struct nfp6000_pcie *nfp, u16 interface)
dev_info(nfp->dev, "%sfree: %d/%d\n", status_msg, bars_free, nfp->bars);
return 0;
+
+err_unmap_bar0:
+ if (nfp->bar[0].iomem)
+ iounmap(nfp->bar[0].iomem);
+ return err;
}
static void disable_bars(struct nfp6000_pcie *nfp)
diff --git a/drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cpp.h b/drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cpp.h
index 3b5182143ec7..af19fe9f4934 100644
--- a/drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cpp.h
+++ b/drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cpp.h
@@ -62,6 +62,10 @@
#define PCI_64BIT_BAR_COUNT 3
+/* NFP hardware vendor/device ids.
+ */
+#define PCI_DEVICE_ID_NETRONOME_NFP3800 0x3800
+
#define NFP_CPP_NUM_TARGETS 16
/* Max size of area it should be safe to request */
#define NFP_CPP_SAFE_AREA_SIZE SZ_2M
--
2.17.1
next prev parent reply other threads:[~2018-08-29 0:15 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-28 20:20 [PATCH net-next 00/15] nfp: add NFP5000 support Jakub Kicinski
2018-08-28 20:20 ` [PATCH net-next 01/15] nfp: encapsulate NSP command arguments into structs Jakub Kicinski
2018-08-28 20:20 ` [PATCH net-next 02/15] nfp: attempt FW load from flash Jakub Kicinski
2018-08-28 20:20 ` [PATCH net-next 03/15] nfp: interpret extended FW load result codes Jakub Kicinski
2018-08-28 20:20 ` [PATCH net-next 04/15] nfp: add support for indirect HWinfo lookup Jakub Kicinski
2018-08-28 20:20 ` [PATCH net-next 05/15] nfp: abm: look up MAC addresses via management FW Jakub Kicinski
2018-08-28 20:20 ` [PATCH net-next 06/15] nfp: add support for NFP5000 Jakub Kicinski
2018-08-28 20:20 ` Jakub Kicinski [this message]
2018-08-28 20:20 ` [PATCH net-next 08/15] nfp: save the MU locality field offset Jakub Kicinski
2018-08-28 20:20 ` [PATCH net-next 09/15] nfp: add basic errors messages to target logic Jakub Kicinski
2018-08-28 20:20 ` [PATCH net-next 10/15] nfp: add RTsym access helpers Jakub Kicinski
2018-08-28 20:20 ` [PATCH net-next 11/15] nfp: pass cpp_id to nfp_cpp_map_area() Jakub Kicinski
2018-08-28 20:20 ` [PATCH net-next 12/15] nfp: convert existing RTsym helpers to full target decoding Jakub Kicinski
2018-08-28 20:20 ` [PATCH net-next 13/15] nfp: convert all RTsym users to use new read/write helpers Jakub Kicinski
2018-08-28 20:20 ` [PATCH net-next 14/15] nfp: support access to absolute RTsyms Jakub Kicinski
2018-08-28 20:20 ` [PATCH net-next 15/15] nfp: make RTsym users handle absolute symbols correctly Jakub Kicinski
2018-08-29 0:01 ` [PATCH net-next 00/15] nfp: add NFP5000 support David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180828202047.1305-8-jakub.kicinski@netronome.com \
--to=jakub.kicinski@netronome.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
--cc=oss-drivers@netronome.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).