From: Moritz Fischer <mdf@kernel.org>
To: davem@davemloft.net
Cc: keescook@chromium.org, f.fainelli@gmail.com,
linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
alex.williams@ni.com, Moritz Fischer <mdf@kernel.org>
Subject: [PATCH net-next 2/3] net: nixge: Add support for having nixge as subdevice
Date: Wed, 29 Aug 2018 17:40:45 -0700 [thread overview]
Message-ID: <20180830004046.9417-3-mdf@kernel.org> (raw)
In-Reply-To: <20180830004046.9417-1-mdf@kernel.org>
Add support for instantiating nixge as subdevice using
fixed-link and platform data to configure it.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
---
Hi,
not this patch is still in the early stages,
and as the rest of this series goes on top of [1].
The actual platform data might still change since
the parent device driver is still under development.
Thanks for your time,
Moritz
[1] https://lkml.org/lkml/2018/8/28/1011
---
drivers/net/ethernet/ni/nixge.c | 71 ++++++++++++++++++++++++++---
include/linux/platform_data/nixge.h | 19 ++++++++
2 files changed, 83 insertions(+), 7 deletions(-)
create mode 100644 include/linux/platform_data/nixge.h
diff --git a/drivers/net/ethernet/ni/nixge.c b/drivers/net/ethernet/ni/nixge.c
index 670249313ff0..fd8e5b02c459 100644
--- a/drivers/net/ethernet/ni/nixge.c
+++ b/drivers/net/ethernet/ni/nixge.c
@@ -7,6 +7,8 @@
#include <linux/etherdevice.h>
#include <linux/module.h>
#include <linux/netdevice.h>
+#include <linux/phy_fixed.h>
+#include <linux/platform_data/nixge.h>
#include <linux/of_address.h>
#include <linux/of_mdio.h>
#include <linux/of_net.h>
@@ -167,6 +169,7 @@ struct nixge_priv {
/* Connection to PHY device */
struct device_node *phy_node;
phy_interface_t phy_mode;
+ struct phy_device *phydev;
int link;
unsigned int speed;
@@ -859,15 +862,25 @@ static void nixge_dma_err_handler(unsigned long data)
static int nixge_open(struct net_device *ndev)
{
struct nixge_priv *priv = netdev_priv(ndev);
- struct phy_device *phy;
+ struct phy_device *phy = NULL;
int ret;
nixge_device_reset(ndev);
- phy = of_phy_connect(ndev, priv->phy_node,
- &nixge_handle_link_change, 0, priv->phy_mode);
- if (!phy)
- return -ENODEV;
+ if (priv->dev->of_node) {
+ phy = of_phy_connect(ndev, priv->phy_node,
+ &nixge_handle_link_change, 0,
+ priv->phy_mode);
+ if (!phy)
+ return -ENODEV;
+ } else if (priv->phydev) {
+ ret = phy_connect_direct(ndev, priv->phydev,
+ &nixge_handle_link_change,
+ priv->phy_mode);
+ if (ret)
+ return ret;
+ phy = priv->phydev;
+ }
phy_start(phy);
@@ -1215,10 +1228,41 @@ static int nixge_of_get_phy(struct nixge_priv *priv, struct device_node *np)
return 0;
}
+static int nixge_pdata_get_phy(struct nixge_priv *priv,
+ struct nixge_platform_data *pdata)
+{
+ struct phy_device *phy = NULL;
+
+ if (!pdata)
+ return -EINVAL;
+
+ if (pdata && pdata->phy_interface == PHY_INTERFACE_MODE_NA) {
+ struct fixed_phy_status fphy_status = {
+ .link = 1,
+ .duplex = pdata->phy_duplex,
+ .speed = pdata->phy_speed,
+ .pause = 0,
+ .asym_pause = 0,
+ };
+
+ /* TODO: Pull out GPIO from pdata */
+ phy = fixed_phy_register(PHY_POLL, &fphy_status, -1,
+ NULL);
+ if (IS_ERR_OR_NULL(phy)) {
+ dev_err(priv->dev,
+ "failed to register fixed PHY device\n");
+ return -ENODEV;
+ }
+ }
+ priv->phy_mode = pdata->phy_interface;
+ priv->phydev = phy;
+
+ return 0;
+}
+
static int nixge_mdio_setup(struct nixge_priv *priv, struct device_node *np)
{
struct mii_bus *bus;
- int err;
bus = devm_mdiobus_alloc(priv->dev);
if (!bus)
@@ -1254,6 +1298,7 @@ static void *nixge_get_nvmem_address(struct device *dev)
static int nixge_probe(struct platform_device *pdev)
{
+ struct nixge_platform_data *pdata = NULL;
struct nixge_priv *priv;
struct net_device *ndev;
struct resource *dmares;
@@ -1320,10 +1365,16 @@ static int nixge_probe(struct platform_device *pdev)
err = nixge_of_get_phy(priv, np);
if (err)
goto free_netdev;
+ } else {
+ pdata = dev_get_platdata(&pdev->dev);
+ err = nixge_pdata_get_phy(priv, pdata);
+ if (err)
+ goto free_netdev;
}
/* only if it's not a fixed link, do we care about MDIO at all */
- if (priv->phy_node && !of_phy_is_fixed_link(np)) {
+ if ((priv->phy_node && !of_phy_is_fixed_link(np)) ||
+ (pdata && pdata->phy_interface != PHY_INTERFACE_MODE_NA)) {
err = nixge_mdio_setup(priv, np);
if (err) {
dev_err(&pdev->dev, "error registering mdio bus");
@@ -1347,6 +1398,9 @@ static int nixge_probe(struct platform_device *pdev)
of_phy_deregister_fixed_link(np);
of_node_put(np);
}
+
+ if (priv->phydev && phy_is_pseudo_fixed_link(priv->phydev))
+ fixed_phy_unregister(priv->phydev);
free_netdev:
free_netdev(ndev);
@@ -1357,6 +1411,7 @@ static int nixge_remove(struct platform_device *pdev)
{
struct net_device *ndev = platform_get_drvdata(pdev);
struct nixge_priv *priv = netdev_priv(ndev);
+ struct device_node *np = pdev->dev.of_node;
unregister_netdev(ndev);
@@ -1365,6 +1420,8 @@ static int nixge_remove(struct platform_device *pdev)
if (np && of_phy_is_fixed_link(np))
of_phy_deregister_fixed_link(np);
+ else if (priv->phydev && phy_is_pseudo_fixed_link(priv->phydev))
+ fixed_phy_unregister(priv->phydev);
free_netdev(ndev);
diff --git a/include/linux/platform_data/nixge.h b/include/linux/platform_data/nixge.h
new file mode 100644
index 000000000000..aa5dd5760074
--- /dev/null
+++ b/include/linux/platform_data/nixge.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2018 National Instruments Corp.
+ *
+ * Author: Moritz Fischer <mdf@kernel.org>
+ */
+
+#ifndef __NIXGE_PDATA_H__
+#define __NIXGE_PDATA_H__
+
+#include <linux/phy.h>
+
+struct nixge_platform_data {
+ phy_interface_t phy_interface;
+ int phy_speed;
+ int phy_duplex;
+};
+
+#endif /* __NIXGE_PDATA_H__ */
+
--
2.18.0
next prev parent reply other threads:[~2018-08-30 0:40 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-30 0:40 [PATCH net-next 0/3] nixge: fixed-link support Moritz Fischer
2018-08-30 0:40 ` [PATCH net-next 1/3] net: nixge: Add support for fixed-link subnodes Moritz Fischer
2018-08-30 3:04 ` Andrew Lunn
2018-08-30 17:21 ` Moritz Fischer
2018-08-30 17:54 ` Andrew Lunn
2018-08-30 21:09 ` Moritz Fischer
2018-08-30 17:44 ` kbuild test robot
2018-08-30 0:40 ` Moritz Fischer [this message]
2018-08-30 1:07 ` [PATCH net-next 2/3] net: nixge: Add support for having nixge as subdevice Moritz Fischer
2018-08-30 3:11 ` Andrew Lunn
2018-08-30 16:39 ` Moritz Fischer
2018-08-30 17:42 ` Andrew Lunn
2018-08-30 0:40 ` [PATCH net-next 3/3] net: nixge: Use sysdev instead of ndev->dev.parent for DMA Moritz Fischer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180830004046.9417-3-mdf@kernel.org \
--to=mdf@kernel.org \
--cc=alex.williams@ni.com \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=keescook@chromium.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).