From: Leon Romanovsky <leon@kernel.org>
To: Doug Ledford <dledford@redhat.com>, Jason Gunthorpe <jgg@mellanox.com>
Cc: Leon Romanovsky <leonro@mellanox.com>,
RDMA mailing list <linux-rdma@vger.kernel.org>,
Yishai Hadas <yishaih@mellanox.com>,
Saeed Mahameed <saeedm@mellanox.com>,
linux-netdev <netdev@vger.kernel.org>
Subject: [PATCH rdma-next 10/25] IB/mlx5: Set uid as part of RQ commands
Date: Mon, 17 Sep 2018 14:04:03 +0300 [thread overview]
Message-ID: <20180917110418.18937-11-leon@kernel.org> (raw)
In-Reply-To: <20180917110418.18937-1-leon@kernel.org>
From: Yishai Hadas <yishaih@mellanox.com>
Set uid as part of RQ commands so that the firmware can manage the
RQ object in a secured way.
The uid for the destroy command is set by mlx5_core.
This will enable using an RQ that was created by verbs application to
be used by the DEVX flow in case the uid is equal.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
---
drivers/infiniband/hw/mlx5/qp.c | 18 ++++++++++++++----
1 file changed, 14 insertions(+), 4 deletions(-)
diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c
index 786db05dfb91..31c69da7ccdf 100644
--- a/drivers/infiniband/hw/mlx5/qp.c
+++ b/drivers/infiniband/hw/mlx5/qp.c
@@ -1190,7 +1190,7 @@ static size_t get_rq_pas_size(void *qpc)
static int create_raw_packet_qp_rq(struct mlx5_ib_dev *dev,
struct mlx5_ib_rq *rq, void *qpin,
- size_t qpinlen)
+ size_t qpinlen, u16 uid)
{
struct mlx5_ib_qp *mqp = rq->base.container_mibqp;
__be64 *pas;
@@ -1211,6 +1211,7 @@ static int create_raw_packet_qp_rq(struct mlx5_ib_dev *dev,
if (!in)
return -ENOMEM;
+ MLX5_SET(create_rq_in, in, uid, uid);
rqc = MLX5_ADDR_OF(create_rq_in, in, ctx);
if (!(rq->flags & MLX5_IB_RQ_CVLAN_STRIPPING))
MLX5_SET(rqc, rqc, vsd, 1);
@@ -1328,6 +1329,7 @@ static int create_raw_packet_qp(struct mlx5_ib_dev *dev, struct mlx5_ib_qp *qp,
struct mlx5_ib_ucontext *mucontext = to_mucontext(ucontext);
int err;
u32 tdn = mucontext->tdn;
+ u16 uid = mucontext->devx_uid;
if (qp->sq.wqe_cnt) {
err = create_raw_packet_qp_tis(dev, qp, sq, tdn);
@@ -1349,7 +1351,7 @@ static int create_raw_packet_qp(struct mlx5_ib_dev *dev, struct mlx5_ib_qp *qp,
rq->flags |= MLX5_IB_RQ_CVLAN_STRIPPING;
if (qp->flags & MLX5_IB_QP_PCI_WRITE_END_PADDING)
rq->flags |= MLX5_IB_RQ_PCI_WRITE_END_PADDING;
- err = create_raw_packet_qp_rq(dev, rq, in, inlen);
+ err = create_raw_packet_qp_rq(dev, rq, in, inlen, uid);
if (err)
goto err_destroy_sq;
@@ -2840,7 +2842,8 @@ static int ib_mask_to_mlx5_opt(int ib_mask)
static int modify_raw_packet_qp_rq(struct mlx5_ib_dev *dev,
struct mlx5_ib_rq *rq, int new_state,
- const struct mlx5_modify_raw_qp_param *raw_qp_param)
+ const struct mlx5_modify_raw_qp_param *raw_qp_param,
+ u16 uid)
{
void *in;
void *rqc;
@@ -2853,6 +2856,7 @@ static int modify_raw_packet_qp_rq(struct mlx5_ib_dev *dev,
return -ENOMEM;
MLX5_SET(modify_rq_in, in, rq_state, rq->state);
+ MLX5_SET(modify_rq_in, in, uid, uid);
rqc = MLX5_ADDR_OF(modify_rq_in, in, ctx);
MLX5_SET(rqc, rqc, state, new_state);
@@ -2957,6 +2961,7 @@ static int modify_raw_packet_qp(struct mlx5_ib_dev *dev, struct mlx5_ib_qp *qp,
u8 tx_affinity)
{
struct mlx5_ib_raw_packet_qp *raw_packet_qp = &qp->raw_packet_qp;
+ u16 uid = to_mucontext(qp->ibqp.uobject->context)->devx_uid;
struct mlx5_ib_rq *rq = &raw_packet_qp->rq;
struct mlx5_ib_sq *sq = &raw_packet_qp->sq;
int modify_rq = !!qp->rq.wqe_cnt;
@@ -3000,7 +3005,8 @@ static int modify_raw_packet_qp(struct mlx5_ib_dev *dev, struct mlx5_ib_qp *qp,
}
if (modify_rq) {
- err = modify_raw_packet_qp_rq(dev, rq, rq_state, raw_qp_param);
+ err = modify_raw_packet_qp_rq(dev, rq, rq_state, raw_qp_param,
+ uid);
if (err)
return err;
}
@@ -5407,6 +5413,8 @@ static int create_rq(struct mlx5_ib_rwq *rwq, struct ib_pd *pd,
if (!in)
return -ENOMEM;
+ MLX5_SET(create_rq_in, in, uid,
+ to_mucontext(pd->uobject->context)->devx_uid);
rqc = MLX5_ADDR_OF(create_rq_in, in, ctx);
MLX5_SET(rqc, rqc, mem_rq_type,
MLX5_RQC_MEM_RQ_TYPE_MEMORY_RQ_INLINE);
@@ -5792,6 +5800,8 @@ int mlx5_ib_modify_wq(struct ib_wq *wq, struct ib_wq_attr *wq_attr,
if (wq_state == IB_WQS_ERR)
wq_state = MLX5_RQC_STATE_ERR;
MLX5_SET(modify_rq_in, in, rq_state, curr_wq_state);
+ MLX5_SET(modify_rq_in, in, uid,
+ to_mucontext(wq->uobject->context)->devx_uid);
MLX5_SET(rqc, rqc, state, wq_state);
if (wq_attr_mask & IB_WQ_FLAGS) {
--
2.14.4
next prev parent reply other threads:[~2018-09-17 16:31 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-17 11:03 [PATCH rdma-next 00/24] Extend DEVX functionality Leon Romanovsky
2018-09-17 11:03 ` [PATCH mlx5-next 01/25] net/mlx5: Set uid as part of CQ commands Leon Romanovsky
2018-09-17 11:03 ` [PATCH mlx5-next 02/25] net/mlx5: Set uid as part of QP commands Leon Romanovsky
2018-09-19 17:27 ` Jason Gunthorpe
2018-09-20 4:51 ` Leon Romanovsky
2018-09-17 11:03 ` [PATCH mlx5-next 03/25] net/mlx5: Set uid as part of RQ commands Leon Romanovsky
2018-09-19 17:28 ` Jason Gunthorpe
2018-09-19 18:40 ` Saeed Mahameed
2018-09-19 21:10 ` Jason Gunthorpe
2018-09-17 11:03 ` [PATCH mlx5-next 04/25] net/mlx5: Set uid as part of SQ commands Leon Romanovsky
2018-09-17 11:03 ` [PATCH mlx5-next 05/25] net/mlx5: Set uid as part of SRQ commands Leon Romanovsky
2018-09-17 11:03 ` [PATCH mlx5-next 06/25] net/mlx5: Set uid as part of DCT commands Leon Romanovsky
2018-09-17 11:04 ` [PATCH mlx5-next 07/25] net/mlx5: Update mlx5_ifc with DEVX UID bits Leon Romanovsky
2018-09-19 17:31 ` Jason Gunthorpe
2018-09-20 4:51 ` Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 08/25] IB/mlx5: Set uid as part of CQ creation Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 09/25] IB/mlx5: Set uid as part of QP creation Leon Romanovsky
2018-09-17 11:04 ` Leon Romanovsky [this message]
2018-09-17 11:04 ` [PATCH rdma-next 11/25] IB/mlx5: Set uid as part of SQ commands Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 12/25] IB/mlx5: Set uid as part of TIR commands Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 13/25] IB/mlx5: Set uid as part of TIS commands Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 14/25] IB/mlx5: Set uid as part of RQT commands Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 15/25] IB/mlx5: Set uid as part of PD commands Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 16/25] IB/mlx5: Set uid as part of TD commands Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 17/25] IB/mlx5: Set uid as part of SRQ commands Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 18/25] IB/mlx5: Set uid as part of DCT commands Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 19/25] IB/mlx5: Set uid as part of XRCD commands Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 20/25] IB/mlx5: Set uid as part of MCG commands Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 21/25] IB/mlx5: Set valid umem bit on DEVX Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 22/25] IB/mlx5: Expose RAW QP device handles to user space Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 23/25] IB/mlx5: Manage device uid for DEVX white list commands Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 24/25] IB/mlx5: Enable " Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 25/25] IB/mlx5: Enable DEVX on IB Leon Romanovsky
2018-09-17 19:34 ` [PATCH rdma-next 00/24] Extend DEVX functionality Leon Romanovsky
2018-09-17 19:51 ` Or Gerlitz
2018-09-17 20:07 ` Leon Romanovsky
2018-09-17 20:13 ` Or Gerlitz
2018-09-17 20:20 ` Leon Romanovsky
2018-09-19 18:17 ` Jason Gunthorpe
2018-09-20 5:01 ` Leon Romanovsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180917110418.18937-11-leon@kernel.org \
--to=leon@kernel.org \
--cc=dledford@redhat.com \
--cc=jgg@mellanox.com \
--cc=leonro@mellanox.com \
--cc=linux-rdma@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=saeedm@mellanox.com \
--cc=yishaih@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).