From: Leon Romanovsky <leon@kernel.org>
To: Doug Ledford <dledford@redhat.com>, Jason Gunthorpe <jgg@mellanox.com>
Cc: Leon Romanovsky <leonro@mellanox.com>,
RDMA mailing list <linux-rdma@vger.kernel.org>,
Yishai Hadas <yishaih@mellanox.com>,
Saeed Mahameed <saeedm@mellanox.com>,
linux-netdev <netdev@vger.kernel.org>
Subject: [PATCH mlx5-next 02/25] net/mlx5: Set uid as part of QP commands
Date: Mon, 17 Sep 2018 14:03:55 +0300 [thread overview]
Message-ID: <20180917110418.18937-3-leon@kernel.org> (raw)
In-Reply-To: <20180917110418.18937-1-leon@kernel.org>
From: Yishai Hadas <yishaih@mellanox.com>
Set uid as part of QP commands so that the firmware can manage the
QP object in a secured way.
That will enable using a QP that was created by verbs application to
be used by the DEVX flow in case the uid is equal.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
---
drivers/net/ethernet/mellanox/mlx5/core/qp.c | 45 +++++++++++++++++-----------
include/linux/mlx5/mlx5_ifc.h | 22 +++++++-------
include/linux/mlx5/qp.h | 1 +
3 files changed, 39 insertions(+), 29 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/qp.c b/drivers/net/ethernet/mellanox/mlx5/core/qp.c
index 4ca07bfb6b14..04f72a1cdbcc 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/qp.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/qp.c
@@ -240,6 +240,7 @@ int mlx5_core_create_qp(struct mlx5_core_dev *dev,
if (err)
return err;
+ qp->uid = MLX5_GET(create_qp_in, in, uid);
qp->qpn = MLX5_GET(create_qp_out, out, qpn);
mlx5_core_dbg(dev, "qpn = 0x%x\n", qp->qpn);
@@ -261,6 +262,7 @@ int mlx5_core_create_qp(struct mlx5_core_dev *dev,
memset(dout, 0, sizeof(dout));
MLX5_SET(destroy_qp_in, din, opcode, MLX5_CMD_OP_DESTROY_QP);
MLX5_SET(destroy_qp_in, din, qpn, qp->qpn);
+ MLX5_SET(destroy_qp_in, din, uid, qp->uid);
mlx5_cmd_exec(dev, din, sizeof(din), dout, sizeof(dout));
return err;
}
@@ -320,6 +322,7 @@ int mlx5_core_destroy_qp(struct mlx5_core_dev *dev,
MLX5_SET(destroy_qp_in, in, opcode, MLX5_CMD_OP_DESTROY_QP);
MLX5_SET(destroy_qp_in, in, qpn, qp->qpn);
+ MLX5_SET(destroy_qp_in, in, uid, qp->uid);
err = mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
if (err)
return err;
@@ -373,7 +376,7 @@ static void mbox_free(struct mbox_info *mbox)
static int modify_qp_mbox_alloc(struct mlx5_core_dev *dev, u16 opcode, int qpn,
u32 opt_param_mask, void *qpc,
- struct mbox_info *mbox)
+ struct mbox_info *mbox, u16 uid)
{
mbox->out = NULL;
mbox->in = NULL;
@@ -381,26 +384,32 @@ static int modify_qp_mbox_alloc(struct mlx5_core_dev *dev, u16 opcode, int qpn,
#define MBOX_ALLOC(mbox, typ) \
mbox_alloc(mbox, MLX5_ST_SZ_BYTES(typ##_in), MLX5_ST_SZ_BYTES(typ##_out))
-#define MOD_QP_IN_SET(typ, in, _opcode, _qpn) \
- MLX5_SET(typ##_in, in, opcode, _opcode); \
- MLX5_SET(typ##_in, in, qpn, _qpn)
-
-#define MOD_QP_IN_SET_QPC(typ, in, _opcode, _qpn, _opt_p, _qpc) \
- MOD_QP_IN_SET(typ, in, _opcode, _qpn); \
- MLX5_SET(typ##_in, in, opt_param_mask, _opt_p); \
- memcpy(MLX5_ADDR_OF(typ##_in, in, qpc), _qpc, MLX5_ST_SZ_BYTES(qpc))
+#define MOD_QP_IN_SET(typ, in, _opcode, _qpn, _uid) \
+ do { \
+ MLX5_SET(typ##_in, in, opcode, _opcode); \
+ MLX5_SET(typ##_in, in, qpn, _qpn); \
+ MLX5_SET(typ##_in, in, uid, _uid); \
+ } while (0)
+
+#define MOD_QP_IN_SET_QPC(typ, in, _opcode, _qpn, _opt_p, _qpc, _uid) \
+ do { \
+ MOD_QP_IN_SET(typ, in, _opcode, _qpn, _uid); \
+ MLX5_SET(typ##_in, in, opt_param_mask, _opt_p); \
+ memcpy(MLX5_ADDR_OF(typ##_in, in, qpc), \
+ _qpc, MLX5_ST_SZ_BYTES(qpc)); \
+ } while (0)
switch (opcode) {
/* 2RST & 2ERR */
case MLX5_CMD_OP_2RST_QP:
if (MBOX_ALLOC(mbox, qp_2rst))
return -ENOMEM;
- MOD_QP_IN_SET(qp_2rst, mbox->in, opcode, qpn);
+ MOD_QP_IN_SET(qp_2rst, mbox->in, opcode, qpn, uid);
break;
case MLX5_CMD_OP_2ERR_QP:
if (MBOX_ALLOC(mbox, qp_2err))
return -ENOMEM;
- MOD_QP_IN_SET(qp_2err, mbox->in, opcode, qpn);
+ MOD_QP_IN_SET(qp_2err, mbox->in, opcode, qpn, uid);
break;
/* MODIFY with QPC */
@@ -408,37 +417,37 @@ static int modify_qp_mbox_alloc(struct mlx5_core_dev *dev, u16 opcode, int qpn,
if (MBOX_ALLOC(mbox, rst2init_qp))
return -ENOMEM;
MOD_QP_IN_SET_QPC(rst2init_qp, mbox->in, opcode, qpn,
- opt_param_mask, qpc);
+ opt_param_mask, qpc, uid);
break;
case MLX5_CMD_OP_INIT2RTR_QP:
if (MBOX_ALLOC(mbox, init2rtr_qp))
return -ENOMEM;
MOD_QP_IN_SET_QPC(init2rtr_qp, mbox->in, opcode, qpn,
- opt_param_mask, qpc);
+ opt_param_mask, qpc, uid);
break;
case MLX5_CMD_OP_RTR2RTS_QP:
if (MBOX_ALLOC(mbox, rtr2rts_qp))
return -ENOMEM;
MOD_QP_IN_SET_QPC(rtr2rts_qp, mbox->in, opcode, qpn,
- opt_param_mask, qpc);
+ opt_param_mask, qpc, uid);
break;
case MLX5_CMD_OP_RTS2RTS_QP:
if (MBOX_ALLOC(mbox, rts2rts_qp))
return -ENOMEM;
MOD_QP_IN_SET_QPC(rts2rts_qp, mbox->in, opcode, qpn,
- opt_param_mask, qpc);
+ opt_param_mask, qpc, uid);
break;
case MLX5_CMD_OP_SQERR2RTS_QP:
if (MBOX_ALLOC(mbox, sqerr2rts_qp))
return -ENOMEM;
MOD_QP_IN_SET_QPC(sqerr2rts_qp, mbox->in, opcode, qpn,
- opt_param_mask, qpc);
+ opt_param_mask, qpc, uid);
break;
case MLX5_CMD_OP_INIT2INIT_QP:
if (MBOX_ALLOC(mbox, init2init_qp))
return -ENOMEM;
MOD_QP_IN_SET_QPC(init2init_qp, mbox->in, opcode, qpn,
- opt_param_mask, qpc);
+ opt_param_mask, qpc, uid);
break;
default:
mlx5_core_err(dev, "Unknown transition for modify QP: OP(0x%x) QPN(0x%x)\n",
@@ -456,7 +465,7 @@ int mlx5_core_qp_modify(struct mlx5_core_dev *dev, u16 opcode,
int err;
err = modify_qp_mbox_alloc(dev, opcode, qp->qpn,
- opt_param_mask, qpc, &mbox);
+ opt_param_mask, qpc, &mbox, qp->uid);
if (err)
return err;
diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h
index e62a0825d35c..e5a0d3ecfaad 100644
--- a/include/linux/mlx5/mlx5_ifc.h
+++ b/include/linux/mlx5/mlx5_ifc.h
@@ -3395,7 +3395,7 @@ struct mlx5_ifc_sqerr2rts_qp_out_bits {
struct mlx5_ifc_sqerr2rts_qp_in_bits {
u8 opcode[0x10];
- u8 reserved_at_10[0x10];
+ u8 uid[0x10];
u8 reserved_at_20[0x10];
u8 op_mod[0x10];
@@ -3425,7 +3425,7 @@ struct mlx5_ifc_sqd2rts_qp_out_bits {
struct mlx5_ifc_sqd2rts_qp_in_bits {
u8 opcode[0x10];
- u8 reserved_at_10[0x10];
+ u8 uid[0x10];
u8 reserved_at_20[0x10];
u8 op_mod[0x10];
@@ -3630,7 +3630,7 @@ struct mlx5_ifc_rts2rts_qp_out_bits {
struct mlx5_ifc_rts2rts_qp_in_bits {
u8 opcode[0x10];
- u8 reserved_at_10[0x10];
+ u8 uid[0x10];
u8 reserved_at_20[0x10];
u8 op_mod[0x10];
@@ -3660,7 +3660,7 @@ struct mlx5_ifc_rtr2rts_qp_out_bits {
struct mlx5_ifc_rtr2rts_qp_in_bits {
u8 opcode[0x10];
- u8 reserved_at_10[0x10];
+ u8 uid[0x10];
u8 reserved_at_20[0x10];
u8 op_mod[0x10];
@@ -3690,7 +3690,7 @@ struct mlx5_ifc_rst2init_qp_out_bits {
struct mlx5_ifc_rst2init_qp_in_bits {
u8 opcode[0x10];
- u8 reserved_at_10[0x10];
+ u8 uid[0x10];
u8 reserved_at_20[0x10];
u8 op_mod[0x10];
@@ -5193,7 +5193,7 @@ struct mlx5_ifc_qp_2rst_out_bits {
struct mlx5_ifc_qp_2rst_in_bits {
u8 opcode[0x10];
- u8 reserved_at_10[0x10];
+ u8 uid[0x10];
u8 reserved_at_20[0x10];
u8 op_mod[0x10];
@@ -5215,7 +5215,7 @@ struct mlx5_ifc_qp_2err_out_bits {
struct mlx5_ifc_qp_2err_in_bits {
u8 opcode[0x10];
- u8 reserved_at_10[0x10];
+ u8 uid[0x10];
u8 reserved_at_20[0x10];
u8 op_mod[0x10];
@@ -5790,7 +5790,7 @@ struct mlx5_ifc_init2rtr_qp_out_bits {
struct mlx5_ifc_init2rtr_qp_in_bits {
u8 opcode[0x10];
- u8 reserved_at_10[0x10];
+ u8 uid[0x10];
u8 reserved_at_20[0x10];
u8 op_mod[0x10];
@@ -5820,7 +5820,7 @@ struct mlx5_ifc_init2init_qp_out_bits {
struct mlx5_ifc_init2init_qp_in_bits {
u8 opcode[0x10];
- u8 reserved_at_10[0x10];
+ u8 uid[0x10];
u8 reserved_at_20[0x10];
u8 op_mod[0x10];
@@ -6231,7 +6231,7 @@ struct mlx5_ifc_destroy_qp_out_bits {
struct mlx5_ifc_destroy_qp_in_bits {
u8 opcode[0x10];
- u8 reserved_at_10[0x10];
+ u8 uid[0x10];
u8 reserved_at_20[0x10];
u8 op_mod[0x10];
@@ -6896,7 +6896,7 @@ struct mlx5_ifc_create_qp_out_bits {
struct mlx5_ifc_create_qp_in_bits {
u8 opcode[0x10];
- u8 reserved_at_10[0x10];
+ u8 uid[0x10];
u8 reserved_at_20[0x10];
u8 op_mod[0x10];
diff --git a/include/linux/mlx5/qp.h b/include/linux/mlx5/qp.h
index 4778d41085d4..fbe322c966bc 100644
--- a/include/linux/mlx5/qp.h
+++ b/include/linux/mlx5/qp.h
@@ -471,6 +471,7 @@ struct mlx5_core_qp {
int qpn;
struct mlx5_rsc_debug *dbg;
int pid;
+ u16 uid;
};
struct mlx5_core_dct {
--
2.14.4
next prev parent reply other threads:[~2018-09-17 16:31 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-17 11:03 [PATCH rdma-next 00/24] Extend DEVX functionality Leon Romanovsky
2018-09-17 11:03 ` [PATCH mlx5-next 01/25] net/mlx5: Set uid as part of CQ commands Leon Romanovsky
2018-09-17 11:03 ` Leon Romanovsky [this message]
2018-09-19 17:27 ` [PATCH mlx5-next 02/25] net/mlx5: Set uid as part of QP commands Jason Gunthorpe
2018-09-20 4:51 ` Leon Romanovsky
2018-09-17 11:03 ` [PATCH mlx5-next 03/25] net/mlx5: Set uid as part of RQ commands Leon Romanovsky
2018-09-19 17:28 ` Jason Gunthorpe
2018-09-19 18:40 ` Saeed Mahameed
2018-09-19 21:10 ` Jason Gunthorpe
2018-09-17 11:03 ` [PATCH mlx5-next 04/25] net/mlx5: Set uid as part of SQ commands Leon Romanovsky
2018-09-17 11:03 ` [PATCH mlx5-next 05/25] net/mlx5: Set uid as part of SRQ commands Leon Romanovsky
2018-09-17 11:03 ` [PATCH mlx5-next 06/25] net/mlx5: Set uid as part of DCT commands Leon Romanovsky
2018-09-17 11:04 ` [PATCH mlx5-next 07/25] net/mlx5: Update mlx5_ifc with DEVX UID bits Leon Romanovsky
2018-09-19 17:31 ` Jason Gunthorpe
2018-09-20 4:51 ` Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 08/25] IB/mlx5: Set uid as part of CQ creation Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 09/25] IB/mlx5: Set uid as part of QP creation Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 10/25] IB/mlx5: Set uid as part of RQ commands Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 11/25] IB/mlx5: Set uid as part of SQ commands Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 12/25] IB/mlx5: Set uid as part of TIR commands Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 13/25] IB/mlx5: Set uid as part of TIS commands Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 14/25] IB/mlx5: Set uid as part of RQT commands Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 15/25] IB/mlx5: Set uid as part of PD commands Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 16/25] IB/mlx5: Set uid as part of TD commands Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 17/25] IB/mlx5: Set uid as part of SRQ commands Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 18/25] IB/mlx5: Set uid as part of DCT commands Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 19/25] IB/mlx5: Set uid as part of XRCD commands Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 20/25] IB/mlx5: Set uid as part of MCG commands Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 21/25] IB/mlx5: Set valid umem bit on DEVX Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 22/25] IB/mlx5: Expose RAW QP device handles to user space Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 23/25] IB/mlx5: Manage device uid for DEVX white list commands Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 24/25] IB/mlx5: Enable " Leon Romanovsky
2018-09-17 11:04 ` [PATCH rdma-next 25/25] IB/mlx5: Enable DEVX on IB Leon Romanovsky
2018-09-17 19:34 ` [PATCH rdma-next 00/24] Extend DEVX functionality Leon Romanovsky
2018-09-17 19:51 ` Or Gerlitz
2018-09-17 20:07 ` Leon Romanovsky
2018-09-17 20:13 ` Or Gerlitz
2018-09-17 20:20 ` Leon Romanovsky
2018-09-19 18:17 ` Jason Gunthorpe
2018-09-20 5:01 ` Leon Romanovsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180917110418.18937-3-leon@kernel.org \
--to=leon@kernel.org \
--cc=dledford@redhat.com \
--cc=jgg@mellanox.com \
--cc=leonro@mellanox.com \
--cc=linux-rdma@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=saeedm@mellanox.com \
--cc=yishaih@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).