From: "John W. Linville" <linville@tuxdriver.com>
To: Edward Cree <ecree@solarflare.com>
Cc: netdev <netdev@vger.kernel.org>,
Ganesh Goudar <ganeshgr@chelsio.com>,
Jakub Kicinski <jakub.kicinski@netronome.com>,
Dustin Byford <dustin@cumulusnetworks.com>,
Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Subject: Re: [PATCH ethtool] ethtool: support combinations of FEC modes
Date: Mon, 17 Sep 2018 15:52:25 -0400 [thread overview]
Message-ID: <20180917195225.GA27394@tuxdriver.com> (raw)
In-Reply-To: <518b8b8b-0151-1053-3798-6009044ed53a@solarflare.com>
On Wed, Sep 05, 2018 at 06:54:57PM +0100, Edward Cree wrote:
> Of the three drivers that currently support FEC configuration, two (sfc
> and cxgb4[vf]) accept configurations with more than one bit set in the
> feccmd.fec bitmask. (The precise semantics of these combinations vary.)
> Thus, this patch adds the ability to specify such combinations through a
> comma-separated list of FEC modes in the 'encoding' argument on the
> command line.
>
> Also adds --set-fec tests to test-cmdline.c, and corrects the man page
> (the encoding argument is not optional) while updating it.
>
> Signed-off-by: Edward Cree <ecree@solarflare.com>
> ---
> I've CCed the maintainers of the other drivers (cxgb4, nfp) that support
> --set-fec, in case they have opinions on this.
> I'm not totally happy with the man page changebar; it might be clearer
> just to leave the comma-less version in the syntax synopsis and only
> mention the commas in the running-text.
LGTM -- queued for next release...thanks!
John
> ethtool.8.in | 11 ++++++++---
> ethtool.c | 50 +++++++++++++++++++++++++++++++++++++++-----------
> test-cmdline.c | 9 +++++++++
> 3 files changed, 56 insertions(+), 14 deletions(-)
>
> diff --git a/ethtool.8.in b/ethtool.8.in
> index c8a902a..414eaa1 100644
> --- a/ethtool.8.in
> +++ b/ethtool.8.in
> @@ -389,7 +389,8 @@ ethtool \- query or control network driver and hardware settings
> .HP
> .B ethtool \-\-set\-fec
> .I devname
> -.B4 encoding auto off rs baser
> +.B encoding
> +.BR auto | off | rs | baser [ , ...]
> .
> .\" Adjust lines (i.e. full justification) and hyphenate.
> .ad
> @@ -1119,8 +1120,12 @@ current FEC mode, the driver or firmware must take the link down
> administratively and report the problem in the system logs for users to correct.
> .RS 4
> .TP
> -.A4 encoding auto off rs baser
> -Sets the FEC encoding for the device.
> +.BR encoding\ auto | off | rs | baser [ , ...]
> +
> +Sets the FEC encoding for the device. Combinations of options are specified as
> +e.g.
> +.B auto,rs
> +; the semantics of such combinations vary between drivers.
> .TS
> nokeep;
> lB l.
> diff --git a/ethtool.c b/ethtool.c
> index e8b7703..9997930 100644
> --- a/ethtool.c
> +++ b/ethtool.c
> @@ -4967,20 +4967,48 @@ static int do_set_phy_tunable(struct cmd_context *ctx)
>
> static int fecmode_str_to_type(const char *str)
> {
> + if (!strcasecmp(str, "auto"))
> + return ETHTOOL_FEC_AUTO;
> + if (!strcasecmp(str, "off"))
> + return ETHTOOL_FEC_OFF;
> + if (!strcasecmp(str, "rs"))
> + return ETHTOOL_FEC_RS;
> + if (!strcasecmp(str, "baser"))
> + return ETHTOOL_FEC_BASER;
> +
> + return 0;
> +}
> +
> +/* Takes a comma-separated list of FEC modes, returns the bitwise OR of their
> + * corresponding ETHTOOL_FEC_* constants.
> + * Accepts repetitions (e.g. 'auto,auto') and trailing comma (e.g. 'off,').
> + */
> +static int parse_fecmode(const char *str)
> +{
> int fecmode = 0;
> + char buf[6];
>
> if (!str)
> - return fecmode;
> -
> - if (!strcasecmp(str, "auto"))
> - fecmode |= ETHTOOL_FEC_AUTO;
> - else if (!strcasecmp(str, "off"))
> - fecmode |= ETHTOOL_FEC_OFF;
> - else if (!strcasecmp(str, "rs"))
> - fecmode |= ETHTOOL_FEC_RS;
> - else if (!strcasecmp(str, "baser"))
> - fecmode |= ETHTOOL_FEC_BASER;
> + return 0;
> + while (*str) {
> + size_t next;
> + int mode;
>
> + next = strcspn(str, ",");
> + if (next >= 6) /* Bad mode, longest name is 5 chars */
> + return 0;
> + /* Copy into temp buffer and nul-terminate */
> + memcpy(buf, str, next);
> + buf[next] = 0;
> + mode = fecmode_str_to_type(buf);
> + if (!mode) /* Bad mode encountered */
> + return 0;
> + fecmode |= mode;
> + str += next;
> + /* Skip over ',' (but not nul) */
> + if (*str)
> + str++;
> + }
> return fecmode;
> }
>
> @@ -5028,7 +5056,7 @@ static int do_sfec(struct cmd_context *ctx)
> if (!fecmode_str)
> exit_bad_args();
>
> - fecmode = fecmode_str_to_type(fecmode_str);
> + fecmode = parse_fecmode(fecmode_str);
> if (!fecmode)
> exit_bad_args();
>
> diff --git a/test-cmdline.c b/test-cmdline.c
> index a94edea..9c51cca 100644
> --- a/test-cmdline.c
> +++ b/test-cmdline.c
> @@ -266,6 +266,15 @@ static struct test_case {
> { 0, "--set-eee devname tx-timer 42 advertise 0x4321" },
> { 1, "--set-eee devname tx-timer foo" },
> { 1, "--set-eee devname advertise foo" },
> + { 1, "--set-fec devname" },
> + { 0, "--set-fec devname encoding auto" },
> + { 0, "--set-fec devname encoding off," },
> + { 0, "--set-fec devname encoding baser,rs" },
> + { 0, "--set-fec devname encoding auto,auto," },
> + { 1, "--set-fec devname encoding foo" },
> + { 1, "--set-fec devname encoding auto,foo" },
> + { 1, "--set-fec devname encoding auto,," },
> + { 1, "--set-fec devname auto" },
> /* can't test --set-priv-flags yet */
> { 0, "-h" },
> { 0, "--help" },
>
--
John W. Linville Someday the world will need a hero, and you
linville@tuxdriver.com might be all we have. Be ready.
next prev parent reply other threads:[~2018-09-18 1:29 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-05 17:54 [PATCH ethtool] ethtool: support combinations of FEC modes Edward Cree
2018-09-17 19:52 ` John W. Linville [this message]
2018-09-19 14:41 ` Michal Kubecek
2018-09-19 15:33 ` Andrew Lunn
2018-09-19 15:49 ` Michal Kubecek
2018-09-19 15:38 ` Edward Cree
2018-09-19 15:56 ` Michal Kubecek
2018-09-19 16:06 ` [RFC PATCH ethtool] ethtool: better syntax for " Edward Cree
2018-09-20 13:46 ` Michal Kubecek
2018-10-01 18:59 ` John W. Linville
2018-10-04 14:08 ` John W. Linville
2018-10-04 14:43 ` Michal Kubecek
2018-10-04 16:06 ` Edward Cree
2018-10-04 19:41 ` John W. Linville
[not found] ` <811cf92b-51ed-4a8f-4b69-113cdd8473df@mellanox.com>
2018-09-26 8:47 ` [PATCH ethtool] ethtool: support " Ariel Almog
2018-09-28 12:58 ` Edward Cree
2018-09-28 15:39 ` Andrew Lunn
2018-09-28 16:11 ` Edward Cree
2018-09-28 16:45 ` Andrew Lunn
2018-09-28 17:30 ` Edward Cree
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180917195225.GA27394@tuxdriver.com \
--to=linville@tuxdriver.com \
--cc=dirk.vandermerwe@netronome.com \
--cc=dustin@cumulusnetworks.com \
--cc=ecree@solarflare.com \
--cc=ganeshgr@chelsio.com \
--cc=jakub.kicinski@netronome.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).