From mboxrd@z Thu Jan 1 00:00:00 1970 From: Antoine Tenart Subject: [PATCH net-next 03/12] Documentation/bindings: net: marvell-pp2: update the IRQs description Date: Wed, 19 Sep 2018 11:27:02 +0200 Message-ID: <20180919092711.22296-4-antoine.tenart@bootlin.com> References: <20180919092711.22296-1-antoine.tenart@bootlin.com> Cc: Antoine Tenart , netdev@vger.kernel.org, linux-kernel@vger.kernel.org, thomas.petazzoni@bootlin.com, maxime.chevallier@bootlin.com, gregory.clement@bootlin.com, miquel.raynal@bootlin.com, nadavh@marvell.com, stefanc@marvell.com, ymarkman@marvell.com, mw@semihalf.com To: davem@davemloft.net Return-path: Received: from mail.bootlin.com ([62.4.15.54]:43215 "EHLO mail.bootlin.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1727605AbeISPHP (ORCPT ); Wed, 19 Sep 2018 11:07:15 -0400 In-Reply-To: <20180919092711.22296-1-antoine.tenart@bootlin.com> Sender: netdev-owner@vger.kernel.org List-ID: This patch updates the interrupts part of the Marvell PPv2 driver bindings documentation, to keep it in sync with the driver. Signed-off-by: Antoine Tenart --- .../devicetree/bindings/net/marvell-pp2.txt | 45 +++++++++++++------ 1 file changed, 31 insertions(+), 14 deletions(-) diff --git a/Documentation/devicetree/bindings/net/marvell-pp2.txt b/Documentation/devicetree/bindings/net/marvell-pp2.txt index fc019df0d863..b78397669320 100644 --- a/Documentation/devicetree/bindings/net/marvell-pp2.txt +++ b/Documentation/devicetree/bindings/net/marvell-pp2.txt @@ -31,7 +31,7 @@ required. Required properties (port): -- interrupts: interrupt for the port +- interrupts: interrupt(s) for the port - port-id: ID of the port from the MAC point of view - gop-port-id: only for marvell,armada-7k-pp2, ID of the port from the GOP (Group Of Ports) point of view. This ID is used to index the @@ -43,10 +43,12 @@ Optional properties (port): - marvell,loopback: port is loopback mode - phy: a phandle to a phy node defining the PHY address (as the reg property, a single integer). -- interrupt-names: if more than a single interrupt for rx is given, must - be the name associated to the interrupts listed. Valid - names are: "tx-cpu0", "tx-cpu1", "tx-cpu2", "tx-cpu3", - "rx-shared", "link". +- interrupt-names: if more than a single interrupt for is given, must be the + name associated to the interrupts listed. Valid names are: + "hifX", with X in [0..8], and "link". The names "tx-cpu0", + "tx-cpu1", "tx-cpu2", "tx-cpu3" and "rx-shared" are supported + for backward compatibility but shouldn't be used for new + additions. - marvell,system-controller: a phandle to the system controller. Example for marvell,armada-375-pp2: @@ -89,9 +91,14 @@ cpm_ethernet: ethernet@0 { , , , - ; - interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", - "tx-cpu3", "rx-shared"; + , + , + , + , + , + ; + interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4", + "hif5", "hif6", "hif7", "hif8", "link"; port-id = <0>; gop-port-id = <0>; }; @@ -101,9 +108,14 @@ cpm_ethernet: ethernet@0 { , , , - ; - interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", - "tx-cpu3", "rx-shared"; + , + , + , + , + , + ; + interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4", + "hif5", "hif6", "hif7", "hif8", "link"; port-id = <1>; gop-port-id = <2>; }; @@ -113,9 +125,14 @@ cpm_ethernet: ethernet@0 { , , , - ; - interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", - "tx-cpu3", "rx-shared"; + , + , + , + , + , + ; + interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4", + "hif5", "hif6", "hif7", "hif8", "link"; port-id = <2>; gop-port-id = <3>; }; -- 2.17.1