Netdev List
 help / color / mirror / Atom feed
From: Ido Schimmel <idosch@mellanox.com>
To: "netdev@vger.kernel.org" <netdev@vger.kernel.org>
Cc: "davem@davemloft.net" <davem@davemloft.net>,
	Jiri Pirko <jiri@mellanox.com>, Petr Machata <petrm@mellanox.com>,
	Alexander Petrovskiy <alexpe@mellanox.com>,
	mlxsw <mlxsw@mellanox.com>, Ido Schimmel <idosch@mellanox.com>
Subject: [PATCH net] mlxsw: core: Fix use-after-free when flashing firmware during init
Date: Wed, 17 Oct 2018 08:05:45 +0000	[thread overview]
Message-ID: <20181017080525.21856-1-idosch@mellanox.com> (raw)

When the switch driver (e.g., mlxsw_spectrum) determines it needs to
flash a new firmware version it resets the ASIC after the flashing
process. The bus driver (e.g., mlxsw_pci) then registers itself again
with mlxsw_core which means (among other things) that the device
registers itself again with the hwmon subsystem again.

Since the device was registered with the hwmon subsystem using
devm_hwmon_device_register_with_groups(), then the old hwmon device
(registered before the flashing) was never unregistered and was
referencing stale data, resulting in a use-after free.

Fix by removing reliance on device managed APIs in mlxsw_hwmon_init().

Fixes: c86d62cc410c ("mlxsw: spectrum: Reset FW after flash")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Alexander Petrovskiy <alexpe@mellanox.com>
Tested-by: Alexander Petrovskiy <alexpe@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
---
 drivers/net/ethernet/mellanox/mlxsw/core.c      |  2 ++
 drivers/net/ethernet/mellanox/mlxsw/core.h      |  4 ++++
 .../net/ethernet/mellanox/mlxsw/core_hwmon.c    | 17 +++++++++++------
 3 files changed, 17 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/core.c b/drivers/net/ethernet/mellanox/mlxsw/core.c
index 81533d7f395c..937d0ace699a 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/core.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/core.c
@@ -1055,6 +1055,7 @@ int mlxsw_core_bus_device_register(const struct mlxsw_bus_info *mlxsw_bus_info,
 err_driver_init:
 	mlxsw_thermal_fini(mlxsw_core->thermal);
 err_thermal_init:
+	mlxsw_hwmon_fini(mlxsw_core->hwmon);
 err_hwmon_init:
 	if (!reload)
 		devlink_unregister(devlink);
@@ -1088,6 +1089,7 @@ void mlxsw_core_bus_device_unregister(struct mlxsw_core *mlxsw_core,
 	if (mlxsw_core->driver->fini)
 		mlxsw_core->driver->fini(mlxsw_core);
 	mlxsw_thermal_fini(mlxsw_core->thermal);
+	mlxsw_hwmon_fini(mlxsw_core->hwmon);
 	if (!reload)
 		devlink_unregister(devlink);
 	mlxsw_emad_fini(mlxsw_core);
diff --git a/drivers/net/ethernet/mellanox/mlxsw/core.h b/drivers/net/ethernet/mellanox/mlxsw/core.h
index 655ddd204ab2..c35be477856f 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/core.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/core.h
@@ -359,6 +359,10 @@ static inline int mlxsw_hwmon_init(struct mlxsw_core *mlxsw_core,
 	return 0;
 }
 
+static inline void mlxsw_hwmon_fini(struct mlxsw_hwmon *mlxsw_hwmon)
+{
+}
+
 #endif
 
 struct mlxsw_thermal;
diff --git a/drivers/net/ethernet/mellanox/mlxsw/core_hwmon.c b/drivers/net/ethernet/mellanox/mlxsw/core_hwmon.c
index f6cf2896d337..e04e8162aa14 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/core_hwmon.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/core_hwmon.c
@@ -303,8 +303,7 @@ int mlxsw_hwmon_init(struct mlxsw_core *mlxsw_core,
 	struct device *hwmon_dev;
 	int err;
 
-	mlxsw_hwmon = devm_kzalloc(mlxsw_bus_info->dev, sizeof(*mlxsw_hwmon),
-				   GFP_KERNEL);
+	mlxsw_hwmon = kzalloc(sizeof(*mlxsw_hwmon), GFP_KERNEL);
 	if (!mlxsw_hwmon)
 		return -ENOMEM;
 	mlxsw_hwmon->core = mlxsw_core;
@@ -321,10 +320,9 @@ int mlxsw_hwmon_init(struct mlxsw_core *mlxsw_core,
 	mlxsw_hwmon->groups[0] = &mlxsw_hwmon->group;
 	mlxsw_hwmon->group.attrs = mlxsw_hwmon->attrs;
 
-	hwmon_dev = devm_hwmon_device_register_with_groups(mlxsw_bus_info->dev,
-							   "mlxsw",
-							   mlxsw_hwmon,
-							   mlxsw_hwmon->groups);
+	hwmon_dev = hwmon_device_register_with_groups(mlxsw_bus_info->dev,
+						      "mlxsw", mlxsw_hwmon,
+						      mlxsw_hwmon->groups);
 	if (IS_ERR(hwmon_dev)) {
 		err = PTR_ERR(hwmon_dev);
 		goto err_hwmon_register;
@@ -337,5 +335,12 @@ int mlxsw_hwmon_init(struct mlxsw_core *mlxsw_core,
 err_hwmon_register:
 err_fans_init:
 err_temp_init:
+	kfree(mlxsw_hwmon);
 	return err;
 }
+
+void mlxsw_hwmon_fini(struct mlxsw_hwmon *mlxsw_hwmon)
+{
+	hwmon_device_unregister(mlxsw_hwmon->hwmon_dev);
+	kfree(mlxsw_hwmon);
+}
-- 
2.17.2

             reply	other threads:[~2018-10-17 16:00 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-17  8:05 Ido Schimmel [this message]
2018-10-18  5:27 ` [PATCH net] mlxsw: core: Fix use-after-free when flashing firmware during init David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181017080525.21856-1-idosch@mellanox.com \
    --to=idosch@mellanox.com \
    --cc=alexpe@mellanox.com \
    --cc=davem@davemloft.net \
    --cc=jiri@mellanox.com \
    --cc=mlxsw@mellanox.com \
    --cc=netdev@vger.kernel.org \
    --cc=petrm@mellanox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox