From: Eric Dumazet <edumazet@google.com>
To: "David S . Miller" <davem@davemloft.net>
Cc: netdev <netdev@vger.kernel.org>,
"Eric Dumazet" <edumazet@google.com>,
"Eric Dumazet" <eric.dumazet@gmail.com>,
"Eran Ben Elisha" <eranbe@mellanox.com>,
"Saeed Mahameed" <saeedm@mellanox.com>,
"Dimitris Michailidis" <dmichail@google.com>,
"Cong Wang" <xiyou.wangcong@gmail.com>,
"Paweł Staszewski" <pstaszewski@itcare.pl>
Subject: [PATCH net] net/mlx5e: fix csum adjustments caused by RXFCS
Date: Tue, 30 Oct 2018 00:57:25 -0700 [thread overview]
Message-ID: <20181030075725.195824-1-edumazet@google.com> (raw)
As shown by Dmitris, we need to use csum_block_add() instead of csum_add()
when adding the FCS contribution to skb csum.
Before 4.18 (more exactly commit 88078d98d1bb "net: pskb_trim_rcsum()
and CHECKSUM_COMPLETE are friends"), the whole skb csum was thrown away,
so RXFCS changes were ignored.
Then before commit d55bef5059dd ("net: fix pskb_trim_rcsum_slow() with
odd trim offset") both mlx5 and pskb_trim_rcsum_slow() bugs were canceling
each other.
Now we fixed pskb_trim_rcsum_slow() we need to fix mlx5.
Note that this patch also rewrites mlx5e_get_fcs() to :
- Use skb_header_pointer() instead of reinventing it.
- Use __get_unaligned_cpu32() to avoid possible non aligned accesses
as Dmitris pointed out.
Fixes: 902a545904c7 ("net/mlx5e: When RXFCS is set, add FCS data into checksum calculation")
Reported-by: Paweł Staszewski <pstaszewski@itcare.pl>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Eran Ben Elisha <eranbe@mellanox.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Cc: Dimitris Michailidis <dmichail@google.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Paweł Staszewski <pstaszewski@itcare.pl>
---
.../net/ethernet/mellanox/mlx5/core/en_rx.c | 45 ++++---------------
1 file changed, 9 insertions(+), 36 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
index 94224c22ecc310a87b6715051e335446f29bec03..79638dcbae78395fb723c9bf3fa877e7a42d91cd 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
@@ -713,43 +713,15 @@ static inline void mlx5e_enable_ecn(struct mlx5e_rq *rq, struct sk_buff *skb)
rq->stats->ecn_mark += !!rc;
}
-static __be32 mlx5e_get_fcs(struct sk_buff *skb)
+static u32 mlx5e_get_fcs(const struct sk_buff *skb)
{
- int last_frag_sz, bytes_in_prev, nr_frags;
- u8 *fcs_p1, *fcs_p2;
- skb_frag_t *last_frag;
- __be32 fcs_bytes;
+ const void *fcs_bytes;
+ u32 _fcs_bytes;
- if (!skb_is_nonlinear(skb))
- return *(__be32 *)(skb->data + skb->len - ETH_FCS_LEN);
+ fcs_bytes = skb_header_pointer(skb, skb->len - ETH_FCS_LEN,
+ ETH_FCS_LEN, &_fcs_bytes);
- nr_frags = skb_shinfo(skb)->nr_frags;
- last_frag = &skb_shinfo(skb)->frags[nr_frags - 1];
- last_frag_sz = skb_frag_size(last_frag);
-
- /* If all FCS data is in last frag */
- if (last_frag_sz >= ETH_FCS_LEN)
- return *(__be32 *)(skb_frag_address(last_frag) +
- last_frag_sz - ETH_FCS_LEN);
-
- fcs_p2 = (u8 *)skb_frag_address(last_frag);
- bytes_in_prev = ETH_FCS_LEN - last_frag_sz;
-
- /* Find where the other part of the FCS is - Linear or another frag */
- if (nr_frags == 1) {
- fcs_p1 = skb_tail_pointer(skb);
- } else {
- skb_frag_t *prev_frag = &skb_shinfo(skb)->frags[nr_frags - 2];
-
- fcs_p1 = skb_frag_address(prev_frag) +
- skb_frag_size(prev_frag);
- }
- fcs_p1 -= bytes_in_prev;
-
- memcpy(&fcs_bytes, fcs_p1, bytes_in_prev);
- memcpy(((u8 *)&fcs_bytes) + bytes_in_prev, fcs_p2, last_frag_sz);
-
- return fcs_bytes;
+ return __get_unaligned_cpu32(fcs_bytes);
}
static u8 get_ip_proto(struct sk_buff *skb, __be16 proto)
@@ -797,8 +769,9 @@ static inline void mlx5e_handle_csum(struct net_device *netdev,
network_depth - ETH_HLEN,
skb->csum);
if (unlikely(netdev->features & NETIF_F_RXFCS))
- skb->csum = csum_add(skb->csum,
- (__force __wsum)mlx5e_get_fcs(skb));
+ skb->csum = csum_block_add(skb->csum,
+ (__force __wsum)mlx5e_get_fcs(skb),
+ skb->len - ETH_FCS_LEN);
stats->csum_complete++;
return;
}
--
2.19.1.568.g152ad8e336-goog
next reply other threads:[~2018-10-30 16:49 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-30 7:57 Eric Dumazet [this message]
2018-10-30 18:09 ` [PATCH net] net/mlx5e: fix csum adjustments caused by RXFCS Cong Wang
2018-10-30 18:42 ` Eric Dumazet
2018-10-30 18:59 ` Cong Wang
2018-10-30 19:03 ` Eric Dumazet
2018-10-30 18:43 ` David Miller
2018-10-31 11:27 ` Eran Ben Elisha
2018-10-31 19:41 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181030075725.195824-1-edumazet@google.com \
--to=edumazet@google.com \
--cc=davem@davemloft.net \
--cc=dmichail@google.com \
--cc=eranbe@mellanox.com \
--cc=eric.dumazet@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=pstaszewski@itcare.pl \
--cc=saeedm@mellanox.com \
--cc=xiyou.wangcong@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox