From: Ido Schimmel <idosch@mellanox.com>
To: "netdev@vger.kernel.org" <netdev@vger.kernel.org>
Cc: "davem@davemloft.net" <davem@davemloft.net>,
Jiri Pirko <jiri@mellanox.com>, Petr Machata <petrm@mellanox.com>,
mlxsw <mlxsw@mellanox.com>, Ido Schimmel <idosch@mellanox.com>
Subject: [PATCH net 2/4] mlxsw: spectrum: Set minimum shaper on MC TCs
Date: Wed, 31 Oct 2018 09:56:44 +0000 [thread overview]
Message-ID: <20181031095601.29846-3-idosch@mellanox.com> (raw)
In-Reply-To: <20181031095601.29846-1-idosch@mellanox.com>
From: Petr Machata <petrm@mellanox.com>
An MC-aware mode was introduced in commit 7b8195306694 ("mlxsw:
spectrum: Configure MC-aware mode on mlxsw ports"). In MC-aware mode,
BUM traffic gets a special treatment by being assigned to a separate set
of traffic classes 8..15. Pairs of TCs 0 and 8, 1 and 9, etc., are then
configured to strictly prioritize the lower-numbered ones. The intention
is to prevent BUM traffic from flooding the switch and push out all UC
traffic, which would otherwise happen, and instead give UC traffic
precedence.
However strictly prioritizing UC traffic has the effect that UC overload
pushes out all BUM traffic, such as legitimate ARP queries. These
packets are kept in queues for a while, but under sustained UC overload,
their lifetime eventually expires and these packets are dropped. That is
detrimental to network performance as well.
Therefore configure the MC TCs (8..15) with minimum shaper of 200Mbps (a
minimum permitted value) to allow a trickle of necessary control traffic
to get through.
Fixes: 7b8195306694 ("mlxsw: spectrum: Configure MC-aware mode on mlxsw ports")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
---
.../net/ethernet/mellanox/mlxsw/spectrum.c | 25 +++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
index 8a4983adae94..a2df12b79f8e 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
@@ -2740,6 +2740,21 @@ int mlxsw_sp_port_ets_maxrate_set(struct mlxsw_sp_port *mlxsw_sp_port,
return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(qeec), qeec_pl);
}
+static int mlxsw_sp_port_min_bw_set(struct mlxsw_sp_port *mlxsw_sp_port,
+ enum mlxsw_reg_qeec_hr hr, u8 index,
+ u8 next_index, u32 minrate)
+{
+ struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp;
+ char qeec_pl[MLXSW_REG_QEEC_LEN];
+
+ mlxsw_reg_qeec_pack(qeec_pl, mlxsw_sp_port->local_port, hr, index,
+ next_index);
+ mlxsw_reg_qeec_mise_set(qeec_pl, true);
+ mlxsw_reg_qeec_min_shaper_rate_set(qeec_pl, minrate);
+
+ return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(qeec), qeec_pl);
+}
+
int mlxsw_sp_port_prio_tc_set(struct mlxsw_sp_port *mlxsw_sp_port,
u8 switch_prio, u8 tclass)
{
@@ -2817,6 +2832,16 @@ static int mlxsw_sp_port_ets_init(struct mlxsw_sp_port *mlxsw_sp_port)
return err;
}
+ /* Configure the min shaper for multicast TCs. */
+ for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) {
+ err = mlxsw_sp_port_min_bw_set(mlxsw_sp_port,
+ MLXSW_REG_QEEC_HIERARCY_TC,
+ i + 8, i,
+ MLXSW_REG_QEEC_MIS_MIN);
+ if (err)
+ return err;
+ }
+
/* Map all priorities to traffic class 0. */
for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) {
err = mlxsw_sp_port_prio_tc_set(mlxsw_sp_port, i, 0);
--
2.17.2
next prev parent reply other threads:[~2018-10-31 18:54 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-31 9:56 [PATCH net 0/4] mlxsw: Enable minimum shaper on MC TCs Ido Schimmel
2018-10-31 9:56 ` [PATCH net 1/4] mlxsw: reg: QEEC: Add minimum shaper fields Ido Schimmel
2018-10-31 9:56 ` Ido Schimmel [this message]
2018-10-31 9:56 ` [PATCH net 3/4] selftests: mlxsw: qos_mc_aware: Tweak for min shaper Ido Schimmel
2018-10-31 9:56 ` [PATCH net 4/4] selftests: mlxsw: qos_mc_aware: Add a test for UC awareness Ido Schimmel
2018-10-31 19:57 ` [PATCH net 0/4] mlxsw: Enable minimum shaper on MC TCs David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181031095601.29846-3-idosch@mellanox.com \
--to=idosch@mellanox.com \
--cc=davem@davemloft.net \
--cc=jiri@mellanox.com \
--cc=mlxsw@mellanox.com \
--cc=netdev@vger.kernel.org \
--cc=petrm@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox