From mboxrd@z Thu Jan 1 00:00:00 1970 From: Faiz Abbas Subject: [PATCH 5/6] dt-bindings: can: can-transceiver: Remove legacy binding documentation Date: Sat, 3 Nov 2018 00:56:15 +0530 Message-ID: <20181102192616.28291-6-faiz_abbas@ti.com> References: <20181102192616.28291-1-faiz_abbas@ti.com> Mime-Version: 1.0 Content-Type: text/plain Cc: , , , , , To: , , , Return-path: Received: from fllv0016.ext.ti.com ([198.47.19.142]:54066 "EHLO fllv0016.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728033AbeKCEca (ORCPT ); Sat, 3 Nov 2018 00:32:30 -0400 In-Reply-To: <20181102192616.28291-1-faiz_abbas@ti.com> Sender: netdev-owner@vger.kernel.org List-ID: With the transceiver node being implemented as a phy, remove the legacy dcoumentation. Don't remove the code implementing it to maintain dt compatibility. Signed-off-by: Faiz Abbas --- .../bindings/net/can/can-transceiver.txt | 24 ------------------- 1 file changed, 24 deletions(-) delete mode 100644 Documentation/devicetree/bindings/net/can/can-transceiver.txt diff --git a/Documentation/devicetree/bindings/net/can/can-transceiver.txt b/Documentation/devicetree/bindings/net/can/can-transceiver.txt deleted file mode 100644 index 0011f53ff159..000000000000 --- a/Documentation/devicetree/bindings/net/can/can-transceiver.txt +++ /dev/null @@ -1,24 +0,0 @@ -Generic CAN transceiver Device Tree binding ------------------------------- - -CAN transceiver typically limits the max speed in standard CAN and CAN FD -modes. Typically these limitations are static and the transceivers themselves -provide no way to detect this limitation at runtime. For this situation, -the "can-transceiver" node can be used. - -Required Properties: - max-bitrate: a positive non 0 value that determines the max - speed that CAN/CAN-FD can run. Any other value - will be ignored. - -Examples: - -Based on Texas Instrument's TCAN1042HGV CAN Transceiver - -m_can0 { - .... - can-transceiver { - max-bitrate = <5000000>; - }; - ... -}; -- 2.18.0