From: Tao Ren <taoren@fb.com>
To: Andrew Lunn <andrew@lunn.ch>,
Florian Fainelli <f.fainelli@gmail.com>,
"David S . Miller" <davem@davemloft.net>,
<netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: Tao Ren <taoren@fb.com>, <openbmc@lists.ozlabs.org>
Subject: [PATCH net] net: phy: Allow BCM54616S PHY to setup internal TX/RX clock delay
Date: Mon, 5 Nov 2018 14:35:40 -0800 [thread overview]
Message-ID: <20181105223540.1897084-1-taoren@fb.com> (raw)
This patch allows users to enable/disable internal TX and/or RX clock
delay for BCM54616S PHYs so as to satisfy RGMII timing specifications.
On a particular platform, whether TX and/or RX clock delay is required
depends on how PHY connected to the MAC IP. This requirement can be
specified through "phy-mode" property in the platform device tree.
The patch is inspired by commit 733336262b28 ("net: phy: Allow BCM5481x
PHYs to setup internal TX/RX clock delay").
Signed-off-by: Tao Ren <taoren@fb.com>
---
drivers/net/phy/broadcom.c | 18 ++++++++++++++++--
1 file changed, 16 insertions(+), 2 deletions(-)
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index e86ea105c802..704537010453 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -92,7 +92,7 @@ static int bcm54612e_config_init(struct phy_device *phydev)
return 0;
}
-static int bcm5481x_config(struct phy_device *phydev)
+static int bcm54xx_config_clock_delay(struct phy_device *phydev)
{
int rc, val;
@@ -429,7 +429,7 @@ static int bcm5481_config_aneg(struct phy_device *phydev)
ret = genphy_config_aneg(phydev);
/* Then we can set up the delay. */
- bcm5481x_config(phydev);
+ bcm54xx_config_clock_delay(phydev);
if (of_property_read_bool(np, "enet-phy-lane-swap")) {
/* Lane Swap - Undocumented register...magic! */
@@ -442,6 +442,19 @@ static int bcm5481_config_aneg(struct phy_device *phydev)
return ret;
}
+static int bcm54616s_config_aneg(struct phy_device *phydev)
+{
+ int ret;
+
+ /* Aneg firsly. */
+ ret = genphy_config_aneg(phydev);
+
+ /* Then we can set up the delay. */
+ bcm54xx_config_clock_delay(phydev);
+
+ return ret;
+}
+
static int brcm_phy_setbits(struct phy_device *phydev, int reg, int set)
{
int val;
@@ -636,6 +649,7 @@ static struct phy_driver broadcom_drivers[] = {
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_init = bcm54xx_config_init,
+ .config_aneg = bcm54616s_config_aneg,
.ack_interrupt = bcm_phy_ack_intr,
.config_intr = bcm_phy_config_intr,
}, {
--
2.17.1
next reply other threads:[~2018-11-05 22:35 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-05 22:35 Tao Ren [this message]
2018-11-05 22:40 ` [PATCH net] net: phy: Allow BCM54616S PHY to setup internal TX/RX clock delay Florian Fainelli
2018-11-05 23:03 ` Tao Ren
2018-11-06 19:17 ` David Miller
2018-11-06 19:42 ` Tao Ren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181105223540.1897084-1-taoren@fb.com \
--to=taoren@fb.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=openbmc@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox