[PATCH v2 2/3] brcmsmac: Use cordic-related macros from common cordic library

Priit Laes
2018-11-05T19:37:17Z

Current driver includes macro that is available from general cordic
library. Use that and drop unused duplicate and unneeded internal
definitions.

Signed-off-by: Priit Laes <plaes@plaes.org>

---
v2: Use single patch instead of change/removal patches.
---
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_int.h | 7 +-------
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c | 4 ++--
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c | 4 ++--
3 files changed, 4 insertions(+), 11 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_int.h b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_int.h
index 4960f7d..e9e8337 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_int.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_int.h
@@ -220,13 +220,6 @@ enum phy_cal_mode {
#define BB_MULT_MASK 0x0000ffff
#define BB_MULT_VALID_MASK 0x80000000

-#define CORDIC_AG 39797
-#define CORDIC_NI 18
-#define FIXED(X) ((s32)((X) << 16))
-
-#define FLOAT(X) \
- (((X) >= 0) ? ((((X) >> 15) + 1) >> 1) : -((((-(X)) >> 15) + 1) >> 1))
-
#define PHY_CHAIN_TX_DISABLE_TEMP 115
#define PHY_HYSTERESIS_DELTATEMP 5

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c
index 9fb0d9f..e78a93a 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c
@@ -3447,8 +3447,8 @@ wlc_lcnphy_start_tx_tone(struct brcms_phy *pi, s32 f_kHz, u16 max_val,

theta += rot;

- i_samp = (u16) (FLOAT(tone_samp.i * max_val) & 0x3ff);
- q_samp = (u16) (FLOAT(tone_samp.q * max_val) & 0x3ff);
+ i_samp = (u16)(CORDIC_FLOAT(tone_samp.i * max_val) & 0x3ff);
+ q_samp = (u16)(CORDIC_FLOAT(tone_samp.q * max_val) & 0x3ff);
data_buf[t] = (i_samp << 10) | q_samp;
}

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c
index a57f271..f4f5e90 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c
@@ -23089,8 +23089,8 @@ wlc_phy_gen_load_samples_nphy(struct brcms_phy *pi, u32 f_kHz, u16 max_val,

theta += rot;

- tone_buf[t].q = (s32) FLOAT(tone_buf[t].q * max_val);
- tone_buf[t].i = (s32) FLOAT(tone_buf[t].i * max_val);
+ tone_buf[t].q = (s32)CORDIC_FLOAT(tone_buf[t].q * max_val);
+ tone_buf[t].i = (s32)CORDIC_FLOAT(tone_buf[t].i * max_val);
}

wlc_phy_loadsampletable_nphy(pi, tone_buf, num_samps);
--
git-series 0.9.1