From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>,
netdev@vger.kernel.org, nhorman@redhat.com, sassmann@redhat.com
Subject: [net-next 00/11][pull request] 100GbE Intel Wired LAN Driver Updates 2018-11-13
Date: Tue, 13 Nov 2018 10:32:28 -0800 [thread overview]
Message-ID: <20181113183239.5861-1-jeffrey.t.kirsher@intel.com> (raw)
This series contains updates to the ice driver only.
Brett cleans up debug print messages by removing useless or duplicate
messages, and make sure we assign the hardware head pointer to head
instead of the software head pointer. Resolved an issue when disabling
SRIOV we were trying to stop queues multiple times, so make sure we
disable SRIOV before stopping transmit and receive queues for VF.
Tony fixes a potential NULL pointer dereference during a VF reset.
Anirudh resolves an issue where we were releasing the VSI before
removing the VSI scheduler node, which was resulting in an error "Failed
to set LAN Tx queue context, error: -1". Also fixed the guaranteed
number of VSIs available and used by discovering the device
capabilities to determine the 'guar_num_vsi' per function, rather than
always using the theoretical max number of VSIs every time.
Dave avoids a deadlock by nesting RTNL locking, so added a boolean to
determine if the RTNL lock is already held.
Lev fixes bad mask values which would break compilation.
Piotr increases the receive queue disable timeout since it can take
additional time to finish all pending queue requests.
Usha resolves an issue of VLAN priority tagged traffic not appearing on
all traffic classes, which was causing ETS bandwidth shaping to not work
as expected.
Henry fixes the reset path to cleanup the old scheduler tree before
rebuilding it.
Md Fahad removes a unnecessary check which was causing a driver load
error on platforms with more than 128 cores.
The following are changes since commit 3e536cff34244959c81575733c9ca60633f74e1b:
net: phy: check if advertising is zero using linkmode_empty
and are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue 100GbE
Anirudh Venkataramanan (2):
ice: Remove node before releasing VSI
ice: Calculate guaranteed VSIs per function and use it
Brett Creeley (2):
ice: Fix debug print in ice_tx_timeout
ice: Call pci_disable_sriov before stopping queues for VF
Dave Ertman (1):
ice: Avoid nested RTNL locking in ice_dis_vsi
Henry Tieman (1):
ice: Destroy scheduler tree in reset path
Lev Faerman (1):
ice: Fix NVM mask defines
Md Fahad Iqbal Polash (1):
ice: Remove ICE_MAX_TXQ_PER_TXQG check when configuring Tx queue
Piotr Raczynski (1):
ice: Increase Rx queue disable timeout
Tony Nguyen (1):
ice: Check for q_vector when stopping rings
Usha Ketineni (1):
ice: Fix to make VLAN priority tagged traffic to appear on all TCs
drivers/net/ethernet/intel/ice/ice.h | 5 +-
.../net/ethernet/intel/ice/ice_adminq_cmd.h | 7 +-
drivers/net/ethernet/intel/ice/ice_common.c | 31 +++-
.../net/ethernet/intel/ice/ice_hw_autogen.h | 3 +
drivers/net/ethernet/intel/ice/ice_lib.c | 136 ++++++++++--------
drivers/net/ethernet/intel/ice/ice_main.c | 37 +++--
drivers/net/ethernet/intel/ice/ice_sched.c | 110 +++++++++++++-
drivers/net/ethernet/intel/ice/ice_sched.h | 3 +
drivers/net/ethernet/intel/ice/ice_type.h | 4 +-
.../net/ethernet/intel/ice/ice_virtchnl_pf.c | 18 +--
10 files changed, 265 insertions(+), 89 deletions(-)
--
2.19.1
next reply other threads:[~2018-11-14 4:31 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-13 18:32 Jeff Kirsher [this message]
2018-11-13 18:32 ` [net-next 01/11] ice: Fix debug print in ice_tx_timeout Jeff Kirsher
2018-11-13 18:32 ` [net-next 02/11] ice: Check for q_vector when stopping rings Jeff Kirsher
2018-11-13 18:32 ` [net-next 03/11] ice: Remove node before releasing VSI Jeff Kirsher
2018-11-13 18:32 ` [net-next 04/11] ice: Calculate guaranteed VSIs per function and use it Jeff Kirsher
2018-11-13 18:32 ` [net-next 05/11] ice: Avoid nested RTNL locking in ice_dis_vsi Jeff Kirsher
2018-11-13 18:32 ` [net-next 06/11] ice: Fix NVM mask defines Jeff Kirsher
2018-11-13 18:32 ` [net-next 07/11] ice: Increase Rx queue disable timeout Jeff Kirsher
2018-11-13 18:32 ` [net-next 08/11] ice: Call pci_disable_sriov before stopping queues for VF Jeff Kirsher
2018-11-13 18:32 ` [net-next 09/11] ice: Fix to make VLAN priority tagged traffic to appear on all TCs Jeff Kirsher
2018-11-13 18:32 ` [net-next 10/11] ice: Destroy scheduler tree in reset path Jeff Kirsher
2018-11-13 18:32 ` [net-next 11/11] ice: Remove ICE_MAX_TXQ_PER_TXQG check when configuring Tx queue Jeff Kirsher
2018-11-15 19:24 ` [net-next 00/11][pull request] 100GbE Intel Wired LAN Driver Updates 2018-11-13 David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181113183239.5861-1-jeffrey.t.kirsher@intel.com \
--to=jeffrey.t.kirsher@intel.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
--cc=nhorman@redhat.com \
--cc=sassmann@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox