From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andrew Lunn Subject: Re: [PATCH v2 net-next 06/21] net: usb: aqc111: Introduce link management Date: Tue, 13 Nov 2018 21:58:45 +0100 Message-ID: <20181113205845.GB9828@lunn.ch> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Cc: "David S . Miller" , "linux-usb@vger.kernel.org" , "netdev@vger.kernel.org" , Dmitry Bezrukov To: Igor Russkikh Return-path: Received: from vps0.lunn.ch ([185.16.172.187]:33799 "EHLO vps0.lunn.ch" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728730AbeKNG6n (ORCPT ); Wed, 14 Nov 2018 01:58:43 -0500 Content-Disposition: inline In-Reply-To: Sender: netdev-owner@vger.kernel.org List-ID: On Tue, Nov 13, 2018 at 02:44:45PM +0000, Igor Russkikh wrote: > From: Dmitry Bezrukov > > Add full hardware initialization sequence and link configuration logic Hi Igor I'm still not convinced the PHY driver should be embedded in the MAC driver, rather than using phylink. If i remember correctly, it was because the MAC is involved in determining if the link is up? That is nothing new. phylink expects this. The MAC driver should call phylink_mac_change() when the MACs SERDES goes up/down. Andrew